Job Description :

• Responsible for project management and achieving schedule targets.
• Ensure all documented procedures and instructions are followed by related parties.
• Responsible for delivering quality work at optimum cost in all processes.
• Optimize manpower, materials, machinery, and methods in line with company quality objectives.
• Ensure overall safety at the project site.
• Provide support on technical issues related to HVAC System & Process Utilities System.

Requirements :

• Candidate must possess at least a Degree in any field.
• At least 2 years of working experience in the related field is required for this position. Fresh graduates are welcome to apply.
• Hands-on experience in troubleshooting will be an added advantage.
• Strong technical knowledge of HVAC systems will be an added advantage.
• Required skills: Project Management, Technical Support, HVAC Systems & Process Utilities Systems, Good Communication Skills.

Perks & Benefits

• Overtime claimable
• Allowances
• Group insurance (upon confirmation)
• Health insurance

TANGGUNGJAWAB:

• Merancang, melaksanakan dan mengurus sistem kesihatan dan keselamatan bagi memastikan pematuhan dengan peraturan dan prosedur berkanun dan syarikat.
• Bekerjasama rapat dengan semua ketua jabatan untuk memberikan input berkaitan keselamatan, kesihatan dan alam sekitar.
• Menjalankan taklimat/latihan keselamatan untuk semua pekerja baharu, kontraktor, vendor & sebagainya.
• Berhubung dengan pihak berkuasa kerajaan yang berkaitan dan selesaikan isu-isu keselamatan yang timbul dari tapak tersebut.
• Menjalankan mesyuarat dan audit keselamatan secara berkala bagi memastikan pematuhan dengan keperluan HSE.
• Untuk membantu semasa audit dan pemeriksaan serta menyelenggara semua dokumentasi dan rekod.
• Untuk mengenal pasti potensi risiko di tapak pembinaan dan sentiasa memantau prestasi keselamatan & kesihatan di bawah peraturan OSHA.
• Bertanggungjawab untuk merekod dan melaporkan sebarang pelan keselamatan dan pencegahan kerugian, prosedur keselamatan dan laporan kemalangan.
• Menilai dan menganalisis sebarang keadaan berbahaya dan mengesyorkan tindakan pemulihan dan pencegahan.
• Menguatkuasakan pelaksanaan Peralatan Pelindung Diri (PPE) di tapak kerja.
• Untuk menjalankan mesyuarat kotak peralatan.

Kelayakan:

• Calon mesti mempunyai sekurang-kurangnya Ijazah/Diploma dalam Keselamatan dan Kesihatan atau kelayakan yang berkaitan
• Mempunyai Lesen Kecekapan Penyelia Keselamatan Tapak (SSS) yang sah dan berdaftar dengan DOSH/JKKP (Buku Kuning)
• Bahasa yang diperlukan: Bahasa Malaysia, Inggeris, Mandarin
• Mempunyai pengalaman berurusan dengan pihak berkuasa berkaitan

Faedah

• Cuti Tahunan
• Cuti Perubatan
• KWSP / PERKESO
• Elaun
• Bayaran lebih masa

職責：

• 制定、實施和管理健康與安全體系，以確保符合法律法規和公司規章制度。
• 與各部門負責人密切合作，就安全、健康和環境議題提供意見。
• 對所有新員工、承包商、供應商等進行安全簡報/訓練。
• 與相關政府部門聯絡，解決現場出現的安全問題。
• 定期召開安全會議和審核，以確保符合 HSE 要求。
• 協助進行審計和檢查，並維護所有文件和記錄。
• 識別建築工地上的潛在風險，並根據 OSHA 法規不斷追蹤安全健康績效。
• 負責記錄和報告任何安全和損失預防計劃、保全程序和事故報告。
• 評估和分析任何危險情況，並提出補救和預防措施建議。
• 強制執行工作場所個人防護裝備（PPE）的使用。
• 召開工具箱會議。

資格要求：

• 應徵者必須至少擁有安全健康或相關專業的學位/文憑。
• 持有在DOSH/JKKP（黃皮書）註冊的有效現場安全主管（SSS）資格證書
• 所需語言：馬來語、英語、華語
• 具備與相關部門打交道的經驗

好處

• 年假
• 病假
• 僱員公積金/社險
• 津貼
• 加班費

• Order Processing: Prepare and issue purchase orders (PO).
• Liaise with suppliers to request quotes, negotiate pricing/delivery terms, and resolve issues regarding damaged or incorrect goods.
• Maintain accurate purchasing records, update inventory databases, and generate procurement reports.
• Logistics Tracking: Monitor shipment progress to ensure timely delivery of materials.
• Invoice Reconciliation: Verify invoices against purchase orders and receiving documents to process payments through the accounting department.
• Policy Compliance: Ensure all purchasing activities comply with company policies and ethical standards. 

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Flexible working hours
• Casual dress code
• Regular team activities
• Personal leave
• Open culture
• Personal development opportunities

• 訂單處理：準備和發出採購訂單（PO）。
• 與供應商聯絡，索取報價，協商價格/交貨條款，並解決貨物損壞或錯誤等問題。
• 維護準確的採購記錄，更新庫存資料庫，並產生採購報告。
• 物流追蹤：監控貨物運輸進度，確保物料及時交付。
• 發票核對：核對發票與採購訂單和收貨單據，以便透過會計部門處理付款。
• 政策合規性：確保所有採購活動均符合公司政策和道德標準。

福利待遇

• 佣金和獎金
• 津貼（旅費、交通費等）
• 彈性的工作時間
• 休閒著裝要求
• 定期團隊活動
• 個人休假
• 開放文化
• 個人發展機會

• Pemprosesan Pesanan: Menyediakan dan mengeluarkan pesanan pembelian (PO).
• Berhubung dengan pembekal untuk meminta sebut harga, merundingkan terma harga/penghantaran dan menyelesaikan isu mengenai barangan yang rosak atau tidak betul.
• Mengekalkan rekod pembelian yang tepat, mengemas kini pangkalan data inventori dan menjana laporan perolehan.
• Penjejakan Logistik: Pantau kemajuan penghantaran bagi memastikan penghantaran bahan tepat pada masanya.
• Penyelarasan Invois: Sahkan invois terhadap pesanan pembelian dan dokumen penerimaan untuk memproses pembayaran melalui jabatan perakaunan.
• Pematuhan Dasar: Memastikan semua aktiviti pembelian mematuhi dasar dan piawaian etika syarikat.

Faedah & Kebaikan

• Komisen dan bonus
• Elaun (upah perjalanan, pengangkutan, dll.)
• Waktu kerja fleksibel
• Kod pakaian kasual
• Aktiviti pasukan tetap
• Cuti peribadi
• Budaya terbuka
• Peluang pembangunan peribadi

Responsibilities and Authorities

• Develop C# applications to program and integrate PC/PLC control systems—including motion control, vision, and robotics.
• Use C# for machine software integration, conducting debugging and performance testing to maintain optimal operation.
• Provide on-site service support as needed to resolve technical issues.
• To support customer related request including development of new software release, installation and upgrades onsite.
• Perform other jobs deem necessary required by management.
• To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.

To be successful in this role, you will need:

• Min Diploma or Bachelors’ Degree in Software, Electrical & Electronic Engineering, Computer Science or equivalent or with 2 years working experience in the same field..
• Expertise in C# programming is essential.
• Strong knowledge of PLC programming languages and electrical is a plus.
• Willingness to travel for local and overseas site installations and commissioning.
• Familiarity with robotics, vision systems, motion control, sensors, and communication protocols.
• Ability to work independently and as part of a team, managing multiple projects and tasks simultaneously.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave
• Personal development opportunities

職責和權限

• 開發 C# 應用程序，用於編程和整合 PC/PLC 控制系統——包括運動控制、視覺和機器人技術。
• 使用 C# 進行機器軟體整合、調試和效能測試，以保持最佳運作狀態。
• 根據需要提供現場服務支持，以解決技術問題。
• 支援客戶相關請求，包括新軟體版本的開發、現場安裝和升級。
• 執行管理層認為必要的其他工作。
• 遵守 ISO 的所有要求（包括管理層批准的所有標準），並遵守本公司提供的一般安全規範、標準作業程序、工作指導、政策和指南。

要勝任此職位，您需要具備以下條件：

• 最低學歷要求為軟體工程、電機與電子工程、電腦科學或相關專業的專科或本科以上學歷，或具有兩年以上相關領域工作經驗。
• 精通 C# 程式設計是必備條件。
• 具備紮實的PLC程式語言和電氣知識者優先考慮。
• 願意出差進行本地和海外現場安裝和調試。
• 熟悉機器人技術、視覺系統、運動控制、感測器和通訊協定。
• 能夠獨立工作，也能作為團隊成員協作，同時管理多個專案和任務。

福利待遇

• 津貼（旅費、交通費等）
• 醫療保險
• 個人休假
• 個人發展機會

As a Graduate / Junior Engineer, you will support the engineering team by performing specific and limited portions of broader assignments under the guidance of experienced engineers. This role provides hands-on exposure across various engineering disciplines and an opportunity to develop strong technical and professional skills.

Key Responsibilities

• Perform specific and well‑defined tasks as part of larger engineering assignments under moderate supervision.
• Gather, analyze, and correlate basic engineering data using established procedures and tools.
• Execute routine or detailed engineering tasks, including calculations, modeling, and simple testing activities.
• Propose approaches for solving new or unfamiliar technical problems using sound engineering judgement.
• Identify inconsistencies or discrepancies in data, calculations, and outcomes and escalate as appropriate.
• Deliver work in accordance with agreed‑upon budget, scope, and schedule.
• Collaborate with cross‑disciplinary teams (civil, structural, mechanical, electrical, geotechnical) to support integrated design solutions.
• Assist in the preparation of design reports, engineering calculations, drawings, specifications, cost estimates, and project schedules.
• Stay informed on advancements in engineering technologies, tools, and industry best practices relevant to your discipline.
• Apply engineering software and digital tools to support design and analysis tasks.

You will play a crucial role in designing and analyzing structures for various building projects, ensuring safety, efficiency, and compliance with local regulations.

• Assist on structural design projects for a diverse range of buildings and structures
• Works on detailed or routine engineering assignments involving structural analysis and design.
• Collaborate with architects, contractors, and other engineering disciplines to resolve technical issues and ensure project success
• Stay up-to-date with the latest industry trends, technologies, and building codes
• Mentor and provide technical guidance to entry level engineers

Preparation of designs and deliverables related to primary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of primary substation systems, including AIS/GIS configurations, transformer installations, circuit breaker selection, busbar arrangements, switchgear layouts, and disconnectors for voltages up to 800kV.
• Preparation of single-line diagrams (SLDs), general arrangement (GA) layouts, equipment sizing, and equipment layout plans for substations and transmission systems.
• Short-circuit force calculations, busbar sizing, fault current analysis, and equipment protection design, ensuring system stability and protection under fault conditions.
• Design of earthing systems, including grounding layouts, ground grid system design, and lightning protection systems for substations.
• Design and integration of HVDC and HVAC systems, including converter stations, ensuring compatibility with the overall substation design.
• Development of transformer layouts, including oil containment, busduct routing, and secondary system interfaces.
• Optimisation of substation layouts for new and upgraded substations, considering space constraints, equipment accessibility, and construction considerations.
• Review and development of control and protection systems for primary substations, ensuring coordination with secondary systems and compliance with grid operator requirements.
• Coordination with civil teams to design and integrate foundations, steel structures, and electrical cable routes, ensuring seamless integration with the primary systems.
• Development of equipment specification documents, bill of materials (BOM), and procurement support, ensuring the correct equipment is selected as per project requirements.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of primary systems.
• Detailed design and review of auxiliary systems, such as cooling systems, auxiliary power supplies, and battery systems for substations.
• Underground cable design, including cable sizing, cable routing, and integration into existing systems, particularly for HV cable systems.
• Coordination with external vendors and contractors to ensure the supply and installation of equipment in accordance with design specifications and project requirements.

Preparation of designs and deliverables related to primary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of primary substation systems, including AIS/GIS configurations, transformer installations, circuit breaker selection, busbar arrangements, switchgear layouts, and disconnectors for voltages up to 800kV.
• Preparation of single-line diagrams (SLDs), general arrangement (GA) layouts, equipment sizing, and equipment layout plans for substations and transmission systems.
• Short-circuit force calculations, busbar sizing, fault current analysis, and equipment protection design, ensuring system stability and protection under fault conditions.
• Design of earthing systems, including grounding layouts, ground grid system design, and lightning protection systems for substations.
• Design and integration of HVDC and HVAC systems, including converter stations, ensuring compatibility with the overall substation design.
• Development of transformer layouts, including oil containment, busduct routing, and secondary system interfaces.
• Optimisation of substation layouts for new and upgraded substations, considering space constraints, equipment accessibility, and construction considerations.
• Review and development of control and protection systems for primary substations, ensuring coordination with secondary systems and compliance with grid operator requirements.
• Coordination with civil teams to design and integrate foundations, steel structures, and electrical cable routes, ensuring seamless integration with the primary systems.
• Development of equipment specification documents, bill of materials (BOM), and procurement support, ensuring the correct equipment is selected as per project requirements.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of primary systems.
• Detailed design and review of auxiliary systems, such as cooling systems, auxiliary power supplies, and battery systems for substations.
• Underground cable design, including cable sizing, cable routing, and integration into existing systems, particularly for HV cable systems.
• Coordination with external vendors and contractors to ensure the supply and installation of equipment in accordance with design specifications and project requirements.

Preparation of designs and deliverables related to primary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of primary substation systems, including AIS/GIS configurations, transformer installations, circuit breaker selection, busbar arrangements, switchgear layouts, and disconnectors for voltages up to 800kV.
• Preparation of single-line diagrams (SLDs), general arrangement (GA) layouts, equipment sizing, and equipment layout plans for substations and transmission systems.
• Short-circuit force calculations, busbar sizing, fault current analysis, and equipment protection design, ensuring system stability and protection under fault conditions.
• Design of earthing systems, including grounding layouts, ground grid system design, and lightning protection systems for substations.
• Design and integration of HVDC and HVAC systems, including converter stations, ensuring compatibility with the overall substation design.
• Development of transformer layouts, including oil containment, busduct routing, and secondary system interfaces.
• Optimisation of substation layouts for new and upgraded substations, considering space constraints, equipment accessibility, and construction considerations.
• Review and development of control and protection systems for primary substations, ensuring coordination with secondary systems and compliance with grid operator requirements.
• Coordination with civil teams to design and integrate foundations, steel structures, and electrical cable routes, ensuring seamless integration with the primary systems.
• Development of equipment specification documents, bill of materials (BOM), and procurement support, ensuring the correct equipment is selected as per project requirements.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of primary systems.
• Detailed design and review of auxiliary systems, such as cooling systems, auxiliary power supplies, and battery systems for substations.
• Underground cable design, including cable sizing, cable routing, and integration into existing systems, particularly for HV cable systems.
• Coordination with external vendors and contractors to ensure the supply and installation of equipment in accordance with design specifications and project requirements.

This is an exciting opportunity for a motivated engineer to contribute to impactful Energy projects across global offices and continue developing their technical expertise in a supportive, high-performing team.

• Senior technical resource may serve as technical advisor for team
• Provides specialized technical input to studies and design for staff's specific area of expertise.
• Develops study and design procedures to facilitate high-quality cost-effective work by others.
• Participates in interdisciplinary review of project deliverables.
• Develop construction cost estimates and estimates of technical efforts for projects.
• Uses expertise in all steps of completing discipline component of PS&E package.
• Performs quality control review of design calculations or drawings.
• Prepares technical specification sections.
• Provides input to the development of engineering budget and schedule to meet requirements.

Preparation of designs and deliverables related to secondary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of protection and control systems, including relay settings, protection schemes, and interlock systems for substations.
• Preparation of single line diagrams (SLDs), protection logic diagrams, metering layouts, and cable termination diagrams.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of secondary systems.
• Relay coordination studies (overcurrent, earth fault, motor protection, distance protection), including relay setting calculations and fault analysis.
• Power system studies, such as load flow analysis, short circuit studies, transient stability analysis, motor starting studies, and arc flash studies.
• Development of control and relay panel layouts, including general arrangement (GA) drawings, functional block diagrams, and bill of materials (BOMs).
• Design of SCADA communication schemes and system integration for protection systems, ensuring seamless interface between control and field devices.
• Review and verification of design documentation to ensure compliance with industry standards (IEC, IEEE) and utility specifications.
• Support for commissioning and testing, including Factory Acceptance Testing (FAT) and site integration of secondary systems.
• Development of algorithms for enhanced system functionality, such as fault detection, relay coordination, and improving system stability.
• Interdisciplinary coordination, including collaboration with other engineering teams to integrate secondary systems with primary infrastructure.
• Preparation of external connection tables, cable schedules, and other design documentation as required by the project specifications.

Preparation of designs and deliverables related to secondary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of protection and control systems, including relay settings, protection schemes, and interlock systems for substations.
• Preparation of single line diagrams (SLDs), protection logic diagrams, metering layouts, and cable termination diagrams.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of secondary systems.
• Relay coordination studies (overcurrent, earth fault, motor protection, distance protection), including relay setting calculations and fault analysis.
• Power system studies, such as load flow analysis, short circuit studies, transient stability analysis, motor starting studies, and arc flash studies.
• Development of control and relay panel layouts, including general arrangement (GA) drawings, functional block diagrams, and bill of materials (BOMs).
• Design of SCADA communication schemes and system integration for protection systems, ensuring seamless interface between control and field devices.
• Review and verification of design documentation to ensure compliance with industry standards (IEC, IEEE) and utility specifications.
• Support for commissioning and testing, including Factory Acceptance Testing (FAT) and site integration of secondary systems.
• Development of algorithms for enhanced system functionality, such as fault detection, relay coordination, and improving system stability.
• Interdisciplinary coordination, including collaboration with other engineering teams to integrate secondary systems with primary infrastructure.
• Preparation of external connection tables, cable schedules, and other design documentation as required by the project specifications.

Preparation of designs and deliverables related to secondary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of protection and control systems, including relay settings, protection schemes, and interlock systems for substations.
• Preparation of single line diagrams (SLDs), protection logic diagrams, metering layouts, and cable termination diagrams.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of secondary systems.
• Relay coordination studies (overcurrent, earth fault, motor protection, distance protection), including relay setting calculations and fault analysis.
• Power system studies, such as load flow analysis, short circuit studies, transient stability analysis, motor starting studies, and arc flash studies.
• Development of control and relay panel layouts, including general arrangement (GA) drawings, functional block diagrams, and bill of materials (BOMs).
• Design of SCADA communication schemes and system integration for protection systems, ensuring seamless interface between control and field devices.
• Review and verification of design documentation to ensure compliance with industry standards (IEC, IEEE) and utility specifications.
• Support for commissioning and testing, including Factory Acceptance Testing (FAT) and site integration of secondary systems.
• Development of algorithms for enhanced system functionality, such as fault detection, relay coordination, and improving system stability.
• Interdisciplinary coordination, including collaboration with other engineering teams to integrate secondary systems with primary infrastructure.
• Preparation of external connection tables, cable schedules, and other design documentation as required by the project specifications.

• Conduct engineering site surveys to plan equipment and interconnection locations at the site, as well as connections to the existing electrical system.
• Develop and prepare designs for residential solar PV systems, including but not limited to the electrical, structural, and mechanical aspects of the projects.
• Work with the Design Department to confirm the engineering design and decide on the DC equipment and AC interconnection locations at the site, as well as connections to the existing electrical system.
• Liaise with and manage subcontractors regarding their scope of work, schedules, and monitoring the quality of workmanship during installation.
• Record, implement, and manage design change requirements.
• Work with internal and/or external parties such as TNB, consulting firms, and local authorities on licensing applications and documentation.
• Liaise and coordinate with TNB HQ and local authorities on meter installation and grid interconnection of the solar PV system.
• Set up a remote monitoring system and perform testing and commissioning of the solar PV system.
• Review deliverables at project milestones to ensure the project is on schedule and within budget.
• Provide weekly reports and new project schedules to the Head of Department, and proactively update on critical issues such as material shortages, project delivery delays, subcontractor competency, law changes, etc.
• Implement best practices and safe work procedures throughout the project on-site.
• Prepare internal handovers to the O&M department, and communicate with O&M resources during O&M and DLP to ensure compliance with the committed Scope of Work and Service Level Agreement.
• Support O&M in attending to any electrical breakdowns related to solar PV systems during the DLP, initiate fault diagnosis and corrective actions for assigned solar PV projects, and implement new designs or procedures for project installation to avoid recurring faults due to project handling or inappropriate design.
• Provide technical reports for any retention claims from subcontractors due to mishandling, manufacturing claims for product failure, and insurance claims for external factors covered by EAR/WC.
• Monitor system performance by gathering relevant data and producing statistical performance reports before internal handover to the O&M department.

• Possess a Bachelor's Degree/Postgraduate Diploma/Professional Degree in Electrical Engineering or equivalent.
• Preferably have at least 1 year of working experience in electrical installations or the construction industry.
• Fresh graduates are encouraged to apply.
• Proficient in Solar PV system design, AutoCAD, and PVSyst (experience in these will be an added advantage).
• Proficient in AutoCAD, Microsoft Office, Microsoft Project, and ERP systems.
• Customer-oriented, independent, with problem-solving, reporting, and good interpersonal skills.
• Able to work and adhere to tight deadlines.
• Able to multitask and work in a fast-paced environment.
• Comfortable working on weekends and public holidays if required.
• Possess a valid Class D driving license and be able to travel.

• To assist in implementing the company Quality, Safety, Health, and Environmental Management System to making sure it is full compliances to International Standard, Legal compliances, local regulations and any code of practice.
• Execute the Planning and execution of ISO 9001 standard for both corporate and project site related.
• Be a Liasson parties for relevant authorities to ensure Quality matters and concerns being resolved promptly and effectively.
• Provide sound advice and guidance to support the effective implementation of Quality Management System.
• Continually improve the QSHE Management System implementation and provide sound logical applicable mitigation for QSHE related concern.
• Active participation and inspections including provided Quality audit report in all the Solar Farm.
• Propose the Quality Training program and execute the OJT training program in accordance the needs to address and mitigate risk and danger.
• Assist Project Management Team to implement and execute QAQC plan and Project Quality Plan.
• Coordinate and investigate if any Quality related incident happened and enforce remedial and preventive measure to avoid re-occurrence.
• Responsible to develop, lead and promote Total Quality Management excellent to by ensuring full compliances in accordance to QSHE related.
• To be available for communication and coordination whenever required by the organization for Quality related concern.
• Accountable for overall Quality, Safety, Health, and Environmental performance of the corporation.
• Perform inspections with records to making sure the compliances in accordance approved Methods of installation.
• Use professional knowledge and experience with leading assignments, coordination with clients, and service delivery to optimize operational efficiency and client experience.
• Assist the team Manager in assignment and management of specific tasks and work streams.
• Lead assigned sections of an engagement while report accordingly on progress, matters arising and matters of concern throughout an engagement
• Assigns work to fellow / subordinate team members based on section of assignment, while perform quality assurance reviews of work papers
• Work with team members to meet or exceed targeted utilization hours
• Assist with team management and administrative matters

• Bachelor’s Degree in engineering or Renewables Energy or equivalent
• Minimum 3 years of relevant professional audit experience
• Demonstrate confidence and maturity to work under pressure, in a virtual setting, with an international team
• Demonstrate maturity and capability to work with fellow team members while assist to develop junior members of the team
• Self-driven and possess inclination towards use of technology for professional services
• Open to learning new technical knowledge
• Strong oral and written communication skills, including presentation skills
• Possess competent working knowledge with audit software and advanced MS Word, MS Excel

To lead and manage construction works during operational phase, including system upgrade, modification, and performance improvement activities. The role ensures all design and execution works are delivered safely, accurately, and in compliance with technical, quality, and regulatory standards.

Construction Planning and Execution:

• Manage construction works as per developed project execution plan, schedules, milestones, drawings, technical specifications.
• Address site technical queries, resolve issues, and provide necessary approvals to maintain progress
• Develop and lead catch-up plans for construction, and commissioning activities in order to be aligned with project objectives and timelines.
• Carry out inspections to ensure work quality, compliance, and safety
• Provide daily updates and reports on construction performance to stakeholders

Engineering Coordination:

• Review of Approved for Construction (AFC) drawings to ensure practicality and compliance with project specifications, codes, and standards.
• Resolve construction technical issues, provide guidance, and interface with design teams and consultants

Vendor/Subcontractor Management:

• Review vendor/subcontractor proposals, method statements and technical documentation for compliance with project requirements.
• Ensure timely delivery of equipment and materials as per project timelines.
• Collaborate with internal teams to ensure construction material specification compliance with project requirements.

Budget and Cost Control:

• Assist in preparing and monitoring the project budget and controlling costs
• Identify potential cost overruns, changes, or additional works, and ensure timely approval through change management processes
• Provide regular updates and reports on cost performance to stakeholders

Stakeholder Communication:

• Act as the primary construction liaison between the client, TNB/Government authorities, project teams, vendors, and subcontractors
• Attend project construction, meetings, present updates, and resolve construction issues.
• Ensure timely communication and reporting to all relevant parties on construction status and key issues

Risk Management:

• Identify and assess project risks during all phases and develop mitigation plans
• Monitor risks throughout the project and ensure prompt action to minimize impacts

Quality Assurance and Safety:

• Ensure all engineering and construction activities comply with QA/QC procedures and safety standards
• Address non-conformities and ensure corrective actions are implemented effectively
• Promote a culture of safety and quality throughout the construction period.

Commissioning and Handover:

• Prepare, review all the testing procedure and program as per specifications
• Oversee the commissioning phase, ensuring all systems are tested and operational as per specifications
• Review final documentation from vendor/subcontractors to facilitate project handover
• Support client training and operational readiness as required

• Minimum of 3 years of electrical/civil engineering or construction work background, with construction management related to High Voltage (HV) power system being added advantage.
• Bachelor’s degree in electrical or civil engineering or equivalent from a recognized institution
• Possess valid CIDB Green Card.
• Able to be located at outstation (i.e. construction site) during project execution.
• Knowledge of solar PV system installation, maintenance, performance monitoring, and electrical protection systems
• Familiarity with ISO 9001, ISO 14001, and ISO 45001 requirements is desirable
• Familiarity with construction requirements (e.g. JKR specifications, JPS specifications), and practical knowledge on “best practices” for construction activities.
• Strong understanding of low voltage (LV), Medium Voltage (MV) and High Voltage (HV) system integration and commissioning
• Competence in Microsoft Office (e.g. Project, Power Point, Excel, Words & etc.) and construction management software (e.g. Procore).
• Strong understanding of electrical drawings such as Single-Line-Diagram, PV Layout, etc.
• Strong understanding of civil drawings such as Foundation drawings, pile & rebar schedule, etc.
• Ability to perform technical due diligence, design validation, and retrofit feasibility studies
• Experienced in managing contractors, and site supervision
• Strong capability in planning and coordination with good resource management skills
• Timely proactive reporting to stakeholders.
• Strong analytical and problem-solving mindset with attention to detail
• Demonstrates leadership, accountability, and initiative in resolving technical issues
• Effective communicator with strong coordination and interpersonal skills
• Adaptable to field and office environments; able to manage multiple projects concurrently
• Upholds safety, integrity, and professionalism in all aspects of work