Job Scope :

• Assist in project planning, scheduling, and execution, ensuring alignment with approved project plans.
• Monitor and track site progress, ensuring timely completion and compliance with project timelines.
• Coordinate and liaise with site teams, subcontractors, consultants, and clients to resolve project-related issues.
• Conduct site inspections and quality control checks using QAQC procedures to ensure compliance with specifications and standards.
• Manage technical documentation, drawings, and reports, ensuring accuracy and proper version control.
• Provide technical solutions and support to resolve design or construction challenges.
• Ensure compliance with safety regulations and company policies at all times.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Regular team activities
• Open culture
• Personal development opportunities

Job Scope :

• Assist in project planning, scheduling, and execution, ensuring alignment with approved project plans.
• Monitor and track site progress, ensuring timely completion and compliance with project timelines.
• Coordinate and liaise with site teams, subcontractors, consultants, and clients to resolve project-related issues.
• Conduct site inspections and quality control checks using QAQC procedures to ensure compliance with specifications and standards.
• Manage technical documentation, drawings, and reports, ensuring accuracy and proper version control.
• Provide technical solutions and support to resolve design or construction challenges.
• Ensure compliance with safety regulations and company policies at all times.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Regular team activities
• Open culture
• Personal development opportunities

Skop Kerja:

• Membantu dalam perancangan, penjadualan dan pelaksanaan projek, memastikan keselarasan dengan pelan projek yang diluluskan.
• Pantau dan jejaki kemajuan tapak, memastikan penyiapan projek tepat pada masanya dan pematuhan dengan garis masa projek.
• Menyelaras dan berhubung dengan pasukan tapak, subkontraktor, perunding dan pelanggan untuk menyelesaikan isu berkaitan projek.
• Menjalankan pemeriksaan tapak dan pemeriksaan kawalan kualiti menggunakan prosedur QAQC bagi memastikan pematuhan dengan spesifikasi dan piawaian.
• Mengurus dokumentasi teknikal, lukisan dan laporan, memastikan ketepatan dan kawalan versi yang betul.
• Menyediakan penyelesaian dan sokongan teknikal untuk menyelesaikan cabaran reka bentuk atau pembinaan.
• Memastikan pematuhan terhadap peraturan keselamatan dan dasar syarikat pada setiap masa.

Faedah & Kebaikan

• Komisen dan bonus
• Elaun (upah perjalanan, pengangkutan, dll.)
• Aktiviti pasukan tetap
• Budaya terbuka
• Peluang pembangunan peribadi

工作範圍：

• 協助專案規劃、進度安排和執行，確保與已核准的專案計畫保持一致。
• 監控和追蹤工地進度，確保按時完成並符合專案時間表。
• 與現場團隊、分包商、顧問和客戶協調聯絡，解決與專案相關的問題。
• 使用品質保證/品質控製程序進行現場檢查和品質控制檢查，以確保符合規範和標準。
• 管理技術文件、圖紙和報告，確保準確性和正確的版本控制。
• 提供技術解決方案和支持，以解決設計或施工難題。
• 始終遵守安全規章和公司政策。

福利待遇

• 佣金和獎金
• 津貼（旅費、交通費等）
• 定期團隊活動
• 開放文化
• 個人發展機會

We are seeking a highly skilled and innovative senior engineer to lead our technical team in bringing new products to market within a dynamic environment. In this role, you will lead and contribute to the development and implementation of advanced test engineering strategies for our cutting-edge storage products. Below are the key responsibilities:

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Optimize Test Strategies: Design and execute efficient test plans, test time, yield, and quality to meet factory financial goals. Identify cost-effective testing methods through troubleshooting, validation, and continuous improvement.
• Lead and Collaborate on Engineering Solutions: Lead and implement innovative engineering solutions while collaborating with cross-functional teams to ensure project success under competitive timeline.
• Champion Innovation and Cost Efficiency: Collaboratively integrate advanced testing technologies, research, and adopt cost-saving solutions like Test Time Reduction (TTR) and new test platforms, driving CAPEX reduction. Continuously improve test programs and test infrastructure to enhance product quality and reliability.
• Technical Expertise and Support: Provide leadership in electrical failure analysis (EFA), exploring new test method/EFA technique to address RMAs, production, reliability, and DPPM improvement. Analyze test results and deliver reports to stakeholders with actionable insights for improvement.
• Technical Communication and Documentation: Develop and deliver clear, concise technical reports and documentation, including EFA, work instructions, test equipment guidelines, test reports, and specifications.
• NPI Support: Lead NPI projects, ensuring smooth transfer of test technology to mass production.
• Knowledge Sharing and Mentorship: Mentor junior engineers, promote best practices, and facilitate knowledge transfer through technical training.

We are seeking a highly skilled and innovative Staff engineer to lead our technical team in providing memory storage test solutions for new and existing products within a dynamic and high volume manufacturing environment. In this role, you will lead and contribute to the development and implementation of advanced test engineering strategies to ensure product performance, quality and manufacturing efficiency for our cutting-edge storage products. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Act as the primary technical owner for product performance in High Volume Manufacturing.
• Optimize Test Strategies: Design and execute efficient test plans, test time, yield, and quality to meet factory financial goals. Identify cost-effective testing methods through troubleshooting, validation, and continuous improvement.
• Lead and Collaborate on Engineering Solutions: Lead and implement innovative engineering solutions while collaborating with cross-functional teams to ensure project success under competitive timeline.
• Champion Innovation and Cost Efficiency: Collaboratively integrate advanced testing technologies, research, and adopt cost-saving solutions like Test Time Reduction (TTR) and new test platforms, driving CAPEX reduction. Continuously improve test programs and test infrastructure to enhance product quality and reliability.
• Technical Expertise and Support: Provide leadership in electrical failure analysis (EFA), exploring new test method/EFA technique to address RMAs, production, reliability, and DPPM improvement. Analyze test results and deliver reports to stakeholders with actionable insights for improvement.
• Technical Communication and Documentation: Develop and deliver clear, concise technical reports and documentation, including EFA, work instructions, test equipment guidelines, test reports, and specifications.
• NPI Support: Co-lead NPI projects with NPI team, ensuring smooth transfer of test technology from LVM to mass production.
• Knowledge Sharing and Mentorship: Mentor junior engineers, promote best practices, and facilitate knowledge transfer through technical training.

We are seeking a highly skilled and innovative engineer to lead our technical team in bringing new products to market within a dynamic environment. In this role, you will lead and contribute to the development and implementation of advanced test engineering strategies for our cutting-edge storage products. Below are the key responsibilities:

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Optimize Test Strategies: Design and execute efficient test plans, test time, yield, and quality to meet factory financial goals. Identify cost-effective testing methods through troubleshooting, validation, and continuous improvement.
• Lead and Collaborate on Engineering Solutions: Lead and implement innovative engineering solutions while collaborating with cross-functional teams to ensure project success under competitive timeline.
• Champion Innovation and Cost Efficiency: Collaboratively integrate advanced testing technologies, research, and adopt cost-saving solutions like Test Time Reduction (TTR) and new test platforms, driving CAPEX reduction. Continuously improve test programs and test infrastructure to enhance product quality and reliability.
• Technical Expertise and Support: Provide leadership in electrical failure analysis (EFA), exploring new test method/EFA technique to address RMAs, production, reliability, and DPPM improvement. Analyze test results and deliver reports to stakeholders with actionable insights for improvement.
• Technical Communication and Documentation: Develop and deliver clear, concise technical reports and documentation, including EFA, work instructions, test equipment guidelines, test reports, and specifications.
• NPI Support: Lead NPI projects, ensuring smooth transfer of test technology to mass production.
• Knowledge Sharing and Mentorship: Mentor junior engineers, promote best practices, and facilitate knowledge transfer through technical training.
   

We are looking for a curious and motivated Junior Data Management Engineer with foundational experience in machine learning, Computer Vision and GenAI  to join our growing data team. This role is perfect for someone early in their career who is eager to contribute to data engineering tasks while gaining hands-on exposure to machine learning workflows. You'll help ensure data pipelines are optimized for analytics and ML model development, supporting both operational and strategic decision-making. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Work with multiple stakeholders to identify, diagnose and resolve manufacturing process related problems such as quality excursions, manufacturing excellence and cost improvement. 
• Apply computer vision algorithms to inspect production lines for defects, improve yield, and enhance overall quality control. Leverage techniques such as object detection, image segmentation, and defect localization to identify issues early in the manufacturing process. 
• Build, train, and validate machine learning models to address complex manufacturing challenges, such as defect detection, process optimization, and performance prediction. 
• Able  to deploy trained models into production environments, including APIs, edge devices, or embedded systems. Ensure seamless integration with manufacturing systems and establish real-time monitoring for model performance. 
• Design and develop scalable GenAI applications using LLMs tailored to manufacturing use cases.

ESSENTIAL DUTIES AND RESPONSIBILITIES 

In this position, you will work in the Material Engineering team within the Packaging R&D organization who owns and deploys best-in-class material engineering solutions to the top-edge product and technology development across advanced semiconductor packaging, flash memory product and host levels. Your essential duties and responsibilities include:

• Drive advancement in packaging materials by addressing material-related design and process challenges. Develop solutions to support next-generation package requirements, including smaller form factors, thinner die, higher interconnect density, increased power, and enhanced reliability.
• Lead the evaluation, development, and qualification of advanced packaging materials for both product development and high-volume manufacturing. Ensure compliance with industry standards and sustain high material quality to enable reliable, high-yield, and cost-efficient manufacturing.
• Responsible for material characterization, lab testing, and design of experiments (DOE) to simulate manufacturing processes and use-condition failure. Analyze thermal, mechanical, and environmental performance to ensure materials meet reliability and performance targets.
• This position will interface with package and product design (in particular, thermal and mechanical), reliability, failure analysis, assembly R&D, and process teams to define material requirements and solutions. Collaborate with suppliers to develop, optimize, and qualify materials for successful production integration.

We are seeking a detail-oriented and analytical Component DFM Engineering Technician to join our team in Seberang Prai Batu Kawan, Malaysia. 

• Responsible to review and validate the new component request whether it is conformance to internal process requirements and other DFM criteria.
• Responsible to review, validate and buyoff for 2nd/ALT source versus the primary source in term of DFM perspective.
• Able to perform DFM assessment on components with respect to packaging structure, process interaction and reliability.
• Involve in NUDD assessment focusing on components and could be extended to complete product PCBA level.
• Perform Design for Assembly (DfA) & Design for Mechanical Assembly (DfMA) assessment to ensure product meets all assembly criteria with no quality issue.
• Establish DfMA framework that extends the coverage to all mechanical aspect including material selection, thermal dependency, new technology etc.
• Knowledge in SolidWorks application is an added advantage.
• Support Lab activities such as monitor the yearly/regular PM and CAL for each measurement machine and system.

As a Test Engineer - Process, you will lead the Project improvement in Burn In area, and support execution and manufacturing issues related to Test Process, and continue improve manufacturing issues with new ideas from time to time through close collaboration across teams and disciplines. In addition, you'll drive Test Process improvements to make our systems more robust and scalable via systematic and proper tools.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Own and sustain burn-in manufacturing processes to ensure stable production performance.
• Monitor burn-in process health, yield trends, uptime, and quality indicators.
• Analyze yield excursions, failures, and process deviations using data-driven methodologies.
• Lead root cause analysis (RCA) and corrective/preventive actions (CAPA).
• Drive continuous improvement initiatives to improve burn-in efficiency, reliability screening effectiveness, and cost reduction.
• Provide timely disposition and technical support for production issues impacting shipment and manufacturing flow.
• Support lot handling, disposition decisions, and recovery actions during abnormal events.
• Support qualification and release of new products into burn-in manufacturing.
• Partner closely with product managers, NPI engineers, Assembly engineers, Manufacturing supervisor and QA to scope, plan, design, and build new features as well as maintain existing functionality.
• Generate and maintain SOPs, OCAPs, FMEA, control plans, and engineering documentation.
• Ensure compliance with manufacturing standards, ESD requirements, and quality management systems
• Participate in audits and customer quality reviews as required.
• Leverage your experience and knowledge to grow your teammates’ technical breadth and depth through direct coaching and mentoring

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• As a Packaging Engineer, you will work in the Packaging R&D group on thermal designs across semiconductor packaging level, flash product printed circuited board assembly (PCBA) level, and host level.
• The ideal candidate will be responsible for thermal modeling (CFD) and validation of flash products PCBA using analytical/numerical analysis and measurement techniques.
• The focus will be on solutions to meet increased demands for small form factor packages with constrained physical and thermal environments.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Maintain and develop the reliability test procedure.
• Managing the reliability test capability, improvement /automation. 
• Characterize various test profiles to meet customer specific requirements.
• Hands-on experience (tester setup) with automated test equipment (tester) and environmental chambers focusing on Temperature Cycling Test (TCT), Temperature Humidity, Highly Accelerated Stress Test (HAST) or other relevant equipment.
• Develop reliability test capability /test programs/ testing methods for new products or technologies.
• Involve in tester development & improvement. 
• Hands-on experience with electronic testing, debugging, and measurement tools (e.g., oscilloscopes, multimeters, thermal chambers, power supplies) or any other relevant tools/ equipment.
• Build and maintain dashboards and visualizations to support data‑driven decision making within the Reliability Engineering team.
• Support equipment and lab readiness initiatives through data tracking, automation, and system enablement.

As a member of the SSD Quality & Reliability Engineering team, you will leverage your expertise in project and program management, risk management, conflict resolution and quality standards & best practices. You will collaborate closely with cross-functional teams and engage with key stakeholders, including Program Management, Customer Management, Marketing, Manufacturing, and Engineering, to ensure the successful execution of quality and reliability initiatives.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Represent product quality as the Sustaining Program Manager in core teams, ensuring alignment with quality and reliability goals throughout the product lifecycle.
• Accountable for product quality and reliability when product transitions into sustaining phase. Drive activities to ensure that product quality & reliability expectations are met.
• Lead the resolution of quality-related issues during both New Product Introduction (NPI) and Sustaining phases.
• Communicate quality excursions to executive management and core teams.
• Lead crisis processes, driving closure through risk assessment, containment actions, 8D root cause analysis, CAPA, and lessons learned.
• Collaborate with NPI counterparts to ensure seamless product transition into Sustaining, meeting all product, customer, and regulatory requirements.
• Participate in new product kick-off reviews and Manufacturing Readiness Reviews (MRRs).
• Coordinate with other QAPMs/SMEs to share lessons learned and support continuous process improvement across programs.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Responsible for product development and high volume SSD manufacturing is desired.
• Perform manufacturing yield evaluation and data analysis for yield improvement.
• Responsible for prepare, validate and release test package to Agile system.
• Responsible for Failure Analysis of products to meet yield goals and quality targets.
• Interfaces with core team (FW/HW) as well as internal team to solve problems.
• Ability to work with various departments to facilitate the orderly execution of a proposed project plan.
• Participate & contribute in tester/infrastructure and process improvements.
• Ability to read the electrical schematic diagram is an advantage.
• Work closely with departments within the company to ensure product able to meet the delivery timeline.
• Ability to work independently with minimum supervision. 
• Ability to provide guidance to teammate.

We are seeking a detail-oriented and analytical Technologist, Packaging Engineering to join our team in Penang, Malaysia. In this role, you will drive innovation in packaging solutions while ensuring efficiency, quality, and compliance across all product lines. You will collaborate with cross-functional teams to design, develop, and optimize packaging systems that meet customer requirements and regulatory standards. The ideal candidate will bring a systematic approach to problem-solving and a commitment to continuous improvement in packaging technology.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Serve as the Package Engineering representative on cross functional leadership teams, setting technical direction and ensuring packages are fully characterized, qualified, and released to production on schedule while meeting stringent mechanical, electrical, performance, reliability, and quality requirements.
• Provide end to end ownership of the package lifecycle across design, development, qualification, and manufacturing, driving alignment among cross functional engineering teams, global factories, and key stakeholders.
• Lead global engagement with factories and contract manufacturers to enable robust, scalable, and cost effective high volume introduction of new package designs and advanced assembly processes.
• Partner with Packaging R&D organizations worldwide to define, develop, and qualify next generation and emerging packaging technologies in alignment with long term business strategy and product roadmaps
• Drive enterprise level assembly yield improvement initiatives and package cost reduction programs, establishing best practices and measurable performance targets across supported product lines.
• Own package technology roadmaps, oversee budgets for supported products, and guide the development of scalable packaging infrastructure to support future growth and technology transitions.
• Lead new products through the transition from low volume to high volume manufacturing, ensuring yield, quality, and reliability objectives are achieved. Establish and enforce readiness of FMEA, SOD, Control Plans, process recipes, SPC, and other critical assembly controls prior to high volume production.
• Provide technical leadership in evaluating and validating design options through characterization builds and comprehensive DFX (Design for excellence) analyses, including DFM (Design for Manufacturability), DFA (Design for Assembly), DFRW (Design for Rework), influencing product architecture and manufacturing strategy at the system level.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Maintain, improve, and develop QA/QC program as defined in the Company’s Quality Policy standard and control plan.
• Developing and implementing quality control systems, policies, procedures, specifications, forms, checklists, reports, etc., for services, incoming material, and factory assembly, testing and shipping.
• Lead on Quality incident 8D. Investigate quality problems by reviewing quality trends, tracking the root cause(s) of the problem(s), coordinating corrective actions, and implanting appropriate adjustments. Resolve inquires to satisfaction in a professional, timely manner, responding verbally and/or in writing.
• Implement preventive actions to reduce and/or prevent quality problems.
• Performs internal audits of the operation process using inspection results and statistical techniques to provide timely, accurate process and product analysis.
• Analysis audit results and determines proper corrective and preventive action.
• Defines and conducts both systematic/methodical and random/arbitrary tests to ensure proper Quality performance of products.
• Collaborating with operations and engineering team to develop and implement controls and improvements.
• Monitoring and analysing quality performance.
• New product capability, capacity set up, upgrade, troubleshooting and automation.
• Handle virtual factory synchronization standardization, harmonize best practice.
• Work with warehouse personnel to maintain incoming material and finish goods storage according to customer requirements with proper traceability.
• Develops and implements strategies to increase process quality performance through statistical methods and IR 4.0.

Test Engineer - Process, you will be responsible for leading Project improvement in the Burn In area, supporting execution and addressing manufacturing issues related to Test Process. You will be expected to continuously improve manufacturing processes through innovative solutions, collaborating across teams and disciplines. Your role is critical in driving Test Process improvements to enhance system robustness and scalability through systematic approaches and appropriate tools.

• Collaborating with product managers, NPI engineers, Assembly engineers, Manufacturing supervisors, and QA to meticulously scope, plan, design, and implement new features while maintaining existing functionality.
• Upholding and enforcing high engineering standards across the team.
• Utilizing your expertise to enhance the technical proficiency of team members through rigorous coaching and mentoring.
• Conducting thorough analyses to identify potential issues and ensure quality in manufacturing Testing Processes.
• Meticulously documenting and monitoring testing outcomes, establishing comprehensive remediation steps for identified problems.
• Demonstrating a detailed understanding of proper test case documentation and creating effective, focused testing plans
• Engaging in cross-departmental collaboration for cost-saving initiatives.
• Providing comprehensive specifications for proposed solutions, including accurate time and scope assessment.
• Establishing clear, measurable goals for all aspects of product testing and developing robust execution strategies.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Maximize wire bond process capability to handle wide range of product portfolio.
• Drive for Wire Bond process yield improvement and monitoring.
• Drive for Wire Bond related test QDN investigation and improvement plan.
• Drive for wire bond related improvement projects.
• Hand-sake with NPI team on new technology / product / wire bond methodology transfer to mass production.
• Liaise and work with equipment team on equipment related improvement and new machine qualification.
• Project management in project related to wire bond yield improvement, cost saving and process efficiency.

We are seeking a highly skilled and innovative senior engineer to lead our technical team in bringing new products to market within a dynamic environment. In this role, you will lead and contribute to the development and implementation of advanced test engineering strategies for our cutting-edge storage products. Below are the key responsibilities:

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Optimize Test Strategies: Design and execute efficient test plans, test time, yield, and quality to meet factory financial goals. Identify cost-effective testing methods through troubleshooting, validation, and continuous improvement.
• Lead and Collaborate on Engineering Solutions: Lead and implement innovative engineering solutions while collaborating with cross-functional teams to ensure project success under competitive timeline.
• Champion Innovation and Cost Efficiency: Collaboratively integrate advanced testing technologies, research, and adopt cost-saving solutions like Test Time Reduction (TTR) and new test platforms, driving CAPEX reduction. Continuously improve test programs and test infrastructure to enhance product quality and reliability.
• Technical Expertise and Support: Provide leadership in electrical failure analysis (EFA), exploring new test method/EFA technique to address RMAs, production, reliability, and DPPM improvement. Analyze test results and deliver reports to stakeholders with actionable insights for improvement.
• Technical Communication and Documentation: Develop and deliver clear, concise technical reports and documentation, including EFA, work instructions, test equipment guidelines, test reports, and specifications.
• NPI Support: Lead NPI projects, ensuring smooth transfer of test technology to mass production.
• Knowledge Sharing and Mentorship: Mentor junior engineers, promote best practices, and facilitate knowledge transfer through technical training.
   

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Operations Monitoring: Oversee semiconductor solid state drive (SSD) mechanical assembly manufacturing processes, ensuring production runs smoothly and efficiently while maintaining optimal output levels and component precision standards.
• Troubleshooting & Maintenance: Identify machine malfunctions in SSD assembly equipment, troubleshoot complex mechanical and electromechanical issues, and perform routine maintenance to minimize production disruptions and ensure assembly accuracy.
• Process Optimization: Collaborate with engineers to improve SSD mechanical assembly workflow, reduce downtime, enhance product quality, and optimize assembly sequences through continuous improvement initiatives.
• Documentation & Reporting: Compile data, create evaluation reports, and document troubleshooting findings specific to SSD assembly processes to maintain accurate equipment and process records.
• Compliance & Safety: Maintain 5S standards in SSD assembly areas, follow safety protocols for semiconductor manufacturing environments, and ensure quality standards are met across all mechanical assembly operations.
• Quality Assurance & Inspection: Conduct inspections and quality checks on SSD mechanical assemblies to ensure adherence to established specifications, dimensional tolerances, and industry standards.
• Team Collaboration: Work cross-functionally with production teams, engineers, and supervisors to resolve SSD assembly-related issues and implement process improvements.
• Training & Mentoring: Provide guidance and technical support to junior technicians on SSD mechanical assembly procedures and assist in their professional development.

We are seeking a highly skilled and motivated Staff Engineer to join our Automation Development Engineering team. The ideal candidate will possess strong expertise in multi-system integration, equipment communication (SECS/GEM), .NET technologies (C# and VB), web services, database management (Oracle and SQL Server), and development tools such as TFS. You will collaborate closely with factory operations and internal IT teams to gather requirements, design and develop solutions, and ensure seamless deployment and support.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Design and develop automation applications to support factory operations.
• Analyze business challenges and deliver efficient, scalable solutions.
• Provide technical expertise to evaluate and implement cost-effective systems and procedures.
• Collaborate across departments to gather requirements and deliver solutions that emphasize reusability, scalability, and simplicity.
• Investigate and resolve operational issues, conduct root cause analysis (RCA), and implement preventive measures.
• Manage all phases of the Software Development Life Cycle (SDLC), ensuring thorough documentation and alignment with business needs.
• Work independently or as part of a team to execute tasks and projects assigned by project leads or managers.
• Provide Level-2 technical support to the 24/7 application support team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Integrate assembly/test data pipeline, analyze and transform process data.
• Develop new process for NPI, transfer to HVM without major quality issues. 
• Analyze and optimize existing manufacturing processes to enhance efficiency and product quality.
• Develop and implement process improvement initiatives using methodologies such as Six Sigma and Lean.
• Design and conduct experiments to troubleshoot process issues and validate improvements.
• Develop and maintain factory automation applications with modern frontend tools.
• Develop and optimize Oracle SQL and Microsoft SQL Server queries for data access and reporting.
• Integrate factory systems and manufacturing equipment via web services, API calls, or SECS/GEM communication protocols.
• Collaborate closely with process, equipment, factory automation and IT teams to deliver robust and efficient automation, machine learning and AI solutions.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Perform data mining and analytics for Quality Assurance (QA) in semiconductor Assembly & Testing processes
• Understand QA business workflows (e.g., SPC, 8D, defect management) and translate business needs into scalable data solutions
• Design and develop end-to-end data pipelines, including data ingestion, transformation, modeling, and visualization
• Develop analytical methods such as anomaly detection, trend analysis, and predictive modeling to enhance quality control
• Drive the transformation of quality management from manual processes to automated and intelligent systems
• Develop dashboards, reports, and automated QA-related business applications
• Collaborate with IT, data teams, and business stakeholders to integrate data platforms with operational systems
• Explore and implement AI/GenAI use cases in quality engineering, such as intelligent insights and automated reporting

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• 3D NAND test solution design, assessment, development, and maintenance, including hardware, software, and data analysis.
• R&D and MP program development on multiple platforms including Advantest T5773, T5831 series, & In house designed platforms.
• Test Equipment bring-up and correlation for new packages, including DSA design, pin & channel mapping.
• Product-specific flow creation and integration to meet HVM requirements.
• R&D activities from pre-silicon to post-silicon, including Design Validation, Engineering Evaluation, Qualification Support, and Failure Analysis.
• Engineering investigation and resolution on design/process/packaging issues. 
• RMA failure mode analysis and screen coverage improvements.
• Test data correlation between platforms. Yield enhancement and test time optimization.
• Collaboration internally across multiple departments, such as PE, Device, Packaging, and Design, as well as with external ATE vendors and related parties for debugging and related engineering activities.
• In-house designed platform and new test equipment validation, production environment setup.