ABOUT YOUR ROLE

This position reports to the Plant Manager, Kulim and will be responsible for planning material and production requirements to support the plant's short-, mid-, and long-term needs. This is a strategic position with the expectation that the candidate will eventually take over overall Material Planning and Production Planning. 

YOUR KEY RESPONSIBILITIES WILL INCLUDE
Material Planning:

• The person will be working very closely with the Demand and Production Planning to ensure direct materials and consumables short, mid and long term demand are properly understood, aligned, planned and purchased.
• The person will be responsible and accountable to ensure that the material inventory levels are kept within our forecast and work with Procurement, Global Procurement and Suppliers to continuously drive improvements in terms of lead time, pricing, sourcing for business continuity, quality and delivery.
• Prepare monthly reports and quarterly reports such as KPI report, Risk Inventory Report, Spend Data Report for cost saving, Supplier On Time Delivery (OTD) Performance Report and Supplier Performance Review Report.

Production Planning:

• Production planning and forecast management for respective production lines.
• Inventory management to streamline production, meet on-time delivery and achieve inventory performance targets.
• Capacity analysis and improvement.
• Production planning by quarterly according to the analysis of historical order, forecast, capacity and inventory status.
• Overall responsible for production schedule to meet delivery targets and shorten end-to-end lead time.
• Keep good communication and relationship with customers.
• Outsourcing management.
• Own full Oracle launch in Operation.
• People management and coaching.
• Work with the financial departments to come up with sales, contribution margin and spending plan, drive execution to meet the target.

• Direct supervision of site works with the ability to read and interpret construction drawings.
• On-site management of sub-contractors.
• Communicate plans and ensure the timeline is met.
• Conduct site evaluation of the project installation, and report status and issues to respective project manager/engineer.
• Daily progress monitoring and make sure daily work activities are recorded.
• Check and verify installation matches design drawings and raise non-conformances.
• Conduct pre-commissioning checks.
• Ensure compliance with Safety, Health and Environment policies and procedures.
• Make certain all safety requirements are always adhered to at the worksite.
• Oversee the project from beginning to the end as per assigned by the superior.

• Candidate must possess at least a Diploma in Electrical/Civil Engineering.

• Minimum 1 PV solar farm (Large Scale) project full cycle completion from Project Initiation, Execution, Close-up or 2 years experience in PV Large Scale Solar Farm construction will be an advantage.
• Fair knowledge of MS Office (Word, Excel, PowerPoint), and documentation.
• Project site-based.
• Responsible for technical and engineering aspects, sense of Quality, and Safety requirements in the industries.
• Direct supervision of site works with the ability to read and interpret construction drawings.

The Senior Product Quality Engineer (Sr. PQE) is responsible for leading Ongoing Reliability Testing (ORT) programs and ensuring long-term quality and reliability performance of our products across design, manufacturing, and field deployment. This role drives best-in-class reliability monitoring, stress testing, and continuous improvement to meet international standards and customer requirements.

The Sr. PQE works cross-functionally with Design, Test, Manufacturing, Reliability Labs, FA Labs, and Customer/Supplier Quality teams to prevent defects, proactively identify reliability risks, and drive robust product quality throughout the product lifecycle

Key Responsibilities

• Lead and optimize Ongoing Reliability Testing (ORT) strategies and programs for production products, including sample selection, test setup, acceleration models, and data analysis.
• Define, implement, and continuously improve ORT plans and suitable stress tests tailored to specific product applications and use conditions.
• Attend key milestone meetings (from design kick-off through production transfer) with a strong emphasis on long-term reliability risks and ORT requirements.
• Perform and review product qualifications (new products, second source, material/design/process changes) while ensuring seamless integration with ORT programs.
• Ensure product compliance with internal specifications, customer requirements, and applicable standards (e.g., ISO 9001, IATF 16949, IEC, JEDEC, AEC, etc.).
• Communicate ORT plans, results, and reliability data with internal stakeholders and customers (Silicon, Package, and Board Level).
• Participate in and lead risk assessments (e.g., DFMEA, PFMEA) with a focus on long-term reliability; ensure mitigation actions are implemented, validated, and monitored via ORT.
• Review qualification and ORT test results, assess risks, and provide quality approval for production release or change management.
• Generate and publish high-quality qualification and ongoing reliability reports with clear risk assessments and recommendations.
• Lead failure analysis for ORT and qualification failures using advanced electrical, mechanical, and materials analysis techniques; drive root cause identification and corrective actions.
• Define and implement reliability enhancement measures jointly with cross-functional teams to achieve high product robustness.
• Proactively highlight potential criticalities, reliability risks, and early warning signals from ORT data.
• Ensure lessons learned from reliability issues and ORT findings are systematically fed back into design, process, and manufacturing improvements.
• Support or lead continuous improvement initiatives related to reliability monitoring and ORT efficiency.

The Senior Product Quality Engineer (Sr. PQE) is responsible for leading Ongoing Reliability Testing (ORT) programs and ensuring long-term quality and reliability performance of our products across design, manufacturing, and field deployment. This role drives best-in-class reliability monitoring, stress testing, and continuous improvement to meet international standards and customer requirements.

The Sr. PQE works cross-functionally with Design, Test, Manufacturing, Reliability Labs, FA Labs, and Customer/Supplier Quality teams to prevent defects, proactively identify reliability risks, and drive robust product quality throughout the product lifecycle

Key Responsibilities

• Lead and optimize Ongoing Reliability Testing (ORT) strategies and programs for production products, including sample selection, test setup, acceleration models, and data analysis.
• Define, implement, and continuously improve ORT plans and suitable stress tests tailored to specific product applications and use conditions.
• Attend key milestone meetings (from design kick-off through production transfer) with a strong emphasis on long-term reliability risks and ORT requirements.
• Perform and review product qualifications (new products, second source, material/design/process changes) while ensuring seamless integration with ORT programs.
• Ensure product compliance with internal specifications, customer requirements, and applicable standards (e.g., ISO 9001, IATF 16949, IEC, JEDEC, AEC, etc.).
• Communicate ORT plans, results, and reliability data with internal stakeholders and customers (Silicon, Package, and Board Level).
• Participate in and lead risk assessments (e.g., DFMEA, PFMEA) with a focus on long-term reliability; ensure mitigation actions are implemented, validated, and monitored via ORT.
• Review qualification and ORT test results, assess risks, and provide quality approval for production release or change management.
• Generate and publish high-quality qualification and ongoing reliability reports with clear risk assessments and recommendations.
• Lead failure analysis for ORT and qualification failures using advanced electrical, mechanical, and materials analysis techniques; drive root cause identification and corrective actions.
• Define and implement reliability enhancement measures jointly with cross-functional teams to achieve high product robustness.
• Proactively highlight potential criticalities, reliability risks, and early warning signals from ORT data.
• Ensure lessons learned from reliability issues and ORT findings are systematically fed back into design, process, and manufacturing improvements.
• Support or lead continuous improvement initiatives related to reliability monitoring and ORT efficiency.

We are seeking fresh/experienced Test Maintenance Technician to support and sustain Final Test (FT) operations in a high-volume semiconductor manufacturing environment. This role focuses on maintaining stable test performance, supporting equipment and hardware, and ensuring consistent product quality and manufacturing efficiency.

Key Responsibilities

• Perform daily, monthly, 3/6 monthly preventative maintenance (PM) on ATE testers, handlers, and contactors.
• Clean and replace consumable parts like contactor pins, sockets, and indexers.
• Perform routine calibration of the test system's instruments (voltage sources, digital pins, parametric measurement units).
• Troubleshoot hardware issues related to the test cell, including mechanical, electrical, and thermal problems
• Support Test Engineers in correlating failures and gathering data for root cause analysis.
• Work closely with Engineers to implement process improvements and resolve yield issues
• Participate in failure analysis and root cause investigations
• Prepare and maintain test-related documentation and reports

We are looking for an experienced Senior Reliability Technician to join the Global Reliability Lab team. In this role, you will work under the guidance of our reliability engineers to set up, operate, and maintain laboratory test equipment, while ensuring precise execution of qualification plans. You will play a hands-on role in conducting environmental and physical tests, maintaining lab data integrity, and upholding safety standards to support product quality from development through high-volume manufacturing.

Key Responsibilities

•  Reliability Testing & CA Execution: Conduct reliability testing for device and package qualification according to JEDEC/AEC-Q100 standards. Perform detailed Component Analysis (CA) activities, including solderability testing, X-ray inspections, wire pull, ball shear, solder ball shear, die shear tests, and physical dimension measurement.
•  Lab Equipment & Database Management: Set up, operate and maintain accelerated environmental test systems. Manage, maintain, and update reliability databases to ensure all data is accurate and delivered on time.
•  Compliance, Safety & Operational Support: Fully comply with all reliability operating procedures and systems. Fulfill tasks delegated by supervisors or engineers.

• Provide day-to-day documentation and administrative work for the execution of projects.
• Document filling and sorting as per project needs.
• Control of the inbound and outbound of project documents.
• Records and produces meeting minutes.
• Prepare and ensure all project reports are up to date.
• Work with internal parties as per project needs.
• Work with internal and/or external parties such as TNB, consulting firms, local authorities, licensing matters, and documentation.
• Site visit as and when required.
• Contribute, comply, and be committed to the company's quality, health, safety, and environmental management system by making sure it is fully compliant with international standards, legal compliances, local regulations, and any code of practice.
• The above job specifications are by no means exhaustive. Additional responsibilities may be given to you as and when it is deemed necessary.

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Electrical Engineering or equivalent.
• Posted own transportation.
• Able to work on weekend and public holidays as when required.
• Minimum 2 years experiences in Document Control.
• Minimum 2 years experiences in Government Liaison.
• Minimum 2 year working experiences in related field.
• Willing to travel as when required.

We are seeking an experienced Test Application Engineer to support and sustain Final Test (FT) operations in a high-volume semiconductor manufacturing environment. This role focuses on maintaining stable test performance, resolving production test issues, supporting equipment and hardware, and ensuring consistent product quality and manufacturing efficiency.

Key Responsibilities

• Sustain and maintain FT ATE performance for mass production
• Provide daily production test support to ensure stable test operations
• Troubleshoot and resolve test-related issues including yield drops, tester alarms, and test escapes
• Perform test correlation, limit validation, and guard band verification
• Support test hardware maintenance (load boards, sockets, cables, probe interfaces)
• Coordinate with Process, QA, and Manufacturing teams to resolve tester and handler issues
• Support engineering change implementation (ECR / ECO) related to test
• Assist in NPI FT handover from development to mass production
• Support temperature testing, re-test, and containment activities
• Participate in failure analysis and root cause investigations
• Prepare and maintain test-related documentation and reports
• Prepare and maintain Equipment/Tester OEE. 

Maintain and troubleshoot test handlers to support smooth semiconductor production, ensuring high equipment uptime, good product quality, teamwork and safe operations.

Key Responsibilities

• Maintain and troubleshoot test handlers  and AOI (vision inspection) to ensure high uptime
• Perform setup and conversion for different device packages
• Conduct calibration and optimization to improve performance(reduce jam rate, down time) and yield
• Provide production support and resolve equipment issues quickly
• Drive continuous improvement (reduce downtime, increase UPH)
• Manage spare parts and documentation

We are seeking an experienced Test Maintenance Engineer to support and sustain Final Test (FT) operations in a high-volume semiconductor manufacturing environment. This role focuses on maintaining stable test performance, resolving production test issues, supporting equipment and hardware, and ensuring consistent product quality and manufacturing efficiency.

Key Responsibilities

• Sustain and maintain FT ATE test programs for mass production
• Provide daily production test support to ensure stable test operations
• Troubleshoot and resolve test-related issues including yield drops, tester alarms, and test escapes
• Perform test correlation, limit validation, and guard band verification
• Support test hardware maintenance (load boards, sockets, cables, probe interfaces)
• Coordinate with Equipment, Process, and Manufacturing teams to resolve tester and handler issues
• Monitor and analyze FT yield, bin distribution, and test performance metrics
• Support engineering change implementation (ECR / ECO) related to test
• Assist in NPI FT handover from development to mass production
• Support temperature testing, re-test, and containment activities
• Participate in failure analysis and root cause investigations
• Prepare and maintain test-related documentation and reports

• Implement and monitor site-specific HSE policies and procedures in line with local regulations and project requirements
• Conduct daily site inspections, audits, and safety walkabouts to identify hazards and ensure compliance
• Lead toolbox talks, safety briefings, and training sessions for site personnel and subcontractors
• Ensure proper use of PPE (Personal Protective Equipment) and enforce safety protocols at all times
• Investigate incidents, near-misses, and accidents, and prepare detailed incident reports and corrective actions
• Coordinate with project managers, engineers, contractors, and clients to maintain a safe work environment
• Oversee high-risk activities such as working at heights, confined spaces, electrical works, and chemical handling
• Maintain and update all safety documentation, permits-to-work, and compliance records
• Support emergency response planning and drills

Job Summary

Lead and supervise daily production activities to ensure safety, quality, delivery, and productivity targets are achieved. Support continuous improvement initiatives while driving team performance and operational excellence

Key Responsibilities

• Supervise daily production operations and manpower arrangement to meet output targets.
• Monitor product quality, process compliance, and workplace safety standards.
• Coordinate with Engineering, Quality, Maintenance, and Planning teams to resolve production issues.
• Drive continuous improvement activities to improve productivity, efficiency, and downtime performance.
• Coach, guide, and develop operators and line leaders to strengthen team capability.
• Prepare production reports and support KPI tracking for management review.

We are seeking fresh/experienced Test Maintenance Technician to support and sustain Final Test (FT) operations in a high-volume semiconductor manufacturing environment. This role focuses on maintaining stable test performance, supporting equipment and hardware, and ensuring consistent product quality and manufacturing efficiency.

Key Responsibilities

• Perform daily, monthly, 3/6 monthly preventative maintenance (PM) on ATE testers, handlers, and contactors.
• Clean and replace consumable parts like contactor pins, sockets, and indexers.
• Perform routine calibration of the test system's instruments (voltage sources, digital pins, parametric measurement units).
• Troubleshoot hardware issues related to the test cell, including mechanical, electrical, and thermal problems
• Support Test Engineers in correlating failures and gathering data for root cause analysis.
• Work closely with Engineers to implement process improvements and resolve yield issues
• Participate in failure analysis and root cause investigations
• Prepare and maintain test-related documentation and reports

Job Summary

Responsible for developing, executing, and optimizing test processes to verify product functionality and quality. Involves test setup, data analysis, failure analysis, and documentation to support process improvement and production efficiency

Key Responsibilities

• Investigate yield, quality, issues and implement improvements.
• Develop, optimize, and control manufacturing processes.
• Drive process improvements, defect reduction, and implement corrective actions
• Support test process documentation, and continuous improvement initiatives.
• Support production testing, analyze test data, identify failures, and implement corrective actions.
• Execute, and improve test procedures and systems.

Job Summary

Responsible for developing, executing, and optimizing test processes to verify product functionality and quality. Involves test setup, data analysis, failure analysis, and documentation to support process improvement and production efficiency

Key Responsibilities

• Investigate yield, quality, issues and implement improvements.
• Develop, optimize, and control manufacturing processes.
• Drive process improvements, defect reduction, and implement corrective actions
• Support test process documentation, and continuous improvement initiatives.
• Support production testing, analyze test data, identify failures, and implement corrective actions.
• Execute, and improve test procedures and systems.

The AOI (Automated Optical Inspection) Engineer is responsible for optimizing, and maintaining AOI inspection processes in manufacturing environments. This role ensures product quality by improving inspection accuracy, reducing false calls, analyzing defects, and supporting continuous process improvement. The AOI Engineer works closely with Production, Quality, and Process Engineering teams to achieve high yield, reliability, and customer satisfaction

Key Responsibilities

• implement, and optimize manufacturing processes to improve productivity, quality, and efficiency.
• Monitor production performance and analyze process data to identify improvement opportunities.
• Support New Product Introduction (NPI) activities, including process setup, validation, and documentation.
• Work closely with Production, Quality, Maintenance, and Engineering teams to resolve manufacturing issues. failures, and implement corrective actions.
• Execute, and improve Inspection procedures and systems.

Job Summary

Responsible in performing daily monitoring, troubleshooting and continues improvement for the FEE system

Key Responsibilities

1. Daily monitoring FEE system such as HVAC system, CDA system, WWTP & STP system.
2. Able to perform troubleshooting during abnormalities occur at HVAC system, CDA system, WWTP & STP system.
3. Perform preventive maintenance for FEE system according to schedule provided.
4. Monitor & supervise vendor on project activity.
5. Have minimum knowledge in using Microsoft Excel for performance monitoring update.

This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).

Key Responsibilities

• Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle
• Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)
• Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups
• Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand
• Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development
• Implement best known practices and process within test manufacturing sites
• Drive Gross Margins (OEE, Yield, Retest) improvement initiatives 

Lead the Quality Assurance process to ensure the achievement of quality compliances and customer satisfaction. Provide Quality Assurance support and coordinate in resolving potential issues.

Key Responsibilities

• Facilitate Customer Quality Issues and Internal Quality issues to drive Corrective & Preventive Actions.
• Facilitate Quality Planning Process [PFMEA, Control Plan, Measurement System Analysis, Quality Gate] for new process setup.
• Monitor Quality KPIs and coordinate Continuous Improvement activities.
• Analyze, compile, review Quality Metrics, and timely communication to stakeholders.
• Perform Quality Audits to ensure compliances, process effectiveness, and elimination of Quality Risks.
• Coordinate Change Control, RMA, SPC implementation and Quality Training activities 

We are looking for experienced Senior Reliability Engineer to join the Global Reliability Lab team. Supporting products qualification from development through high‑volume manufacturing. In this role, you will play a key part in defining reliability strategies, leading qualification activities, investigating failures, and driving long‑term product robustness.

You will work closely with cross‑functional teams including Design, Test, Failure Analysis, Manufacturing, Quality, and Suppliers to ensure our products meet stringent reliability, customer, and industry standards.

Key Responsibilities

• Execute reliability qualification plans for electronic components, and modules.
• Develop test strategies including HTOL, HAST, THB, TC, HTSL, PTC and mechanical stress tests.
• Review test results, analyze failures, and provide clear conclusions and recommendations.
• Assess risks related to new technologies, new materials, and new manufacturing processes.
• Ensure compliance to relevant JEDEC, IEC, MIL, IPC, and customer-specific standards.

We are looking for experienced Senior Reliability Engineer to join the Global Reliability Lab team. Supporting products qualification from development through high‑volume manufacturing. In this role, you will play a key part in defining reliability strategies, leading qualification activities, investigating failures, and driving long‑term product robustness.

You will work closely with cross‑functional teams including Design, Test, Failure Analysis, Manufacturing, Quality, and Suppliers to ensure our products meet stringent reliability, customer, and industry standards.

Key Responsibilities

• Execute reliability qualification plans for electronic components, and modules.
• Develop test strategies including HTOL, HAST, THB, TC, HTSL, PTC and mechanical stress tests.
• Review test results, analyze failures, and provide clear conclusions and recommendations.
• Assess risks related to new technologies, new materials, and new manufacturing processes.
• Ensure compliance to relevant JEDEC, IEC, MIL, IPC, and customer-specific standards.

We are looking for experienced Senior Reliability Engineer to join the Global Reliability Lab team. Supporting products qualification from development through high‑volume manufacturing. In this role, you will play a key part in defining reliability strategies, leading qualification activities, investigating failures, and driving long‑term product robustness.

You will work closely with cross‑functional teams including Design, Test, Failure Analysis, Manufacturing, Quality, and Suppliers to ensure our products meet stringent reliability, customer, and industry standards.

Key Responsibilities

• Execute reliability qualification plans for electronic components, and modules.
• Develop test strategies including HTOL, HAST, THB, TC, HTSL, PTC and mechanical stress tests.
• Review test results, analyze failures, and provide clear conclusions and recommendations.
• Assess risks related to new technologies, new materials, and new manufacturing processes.
• Ensure compliance to relevant JEDEC, IEC, MIL, IPC, and customer-specific standards.

The Senior Reliability Engineering Manager leads a team of reliability engineers to ensure products meet company and customer reliability requirements. This role is responsible for setting reliability plans, managing qualification activities, and driving timely issue resolution through close collaboration with cross‑functional teams to support overall product quality and business goals.

Additionally, in this role an important objective is to develop a series of best practices in reliability lab operations that will serve as the basis for lab operational practices worldwide.

Key Responsibilities

• Lead, coach, and develop the reliability engineering team to achieve defined reliability and quality objectives.
• Define and drive reliability strategy, plans, and metrics across the product lifecycle.
• Own reliability qualification programs, including planning, execution, review, and risk assessment.
• Partner with cross‑functional teams to identify, prioritize, and resolve reliability risks and field issues.
• Ensure reliability requirements, standards, and best practices are consistently applied across projects.
• Drive continuous improvement initiatives to strengthen product robustness, learning, and execution efficiency.

Role Summary

We are seeking an experienced Cost Manager to support major capital projects within high‑tech manufacturing and industrial facilities. This role focuses on cost planning, budget control, and commercial management across construction, expansion, and equipment‑installation projects.

Job Responsibilities

• Manage full pre‑ and post‑contract cost management activities for semiconductor projects, including estimating, rate analysis, and preparation of final cost plans.
• Lead tendering and procurement processes—managing pre‑qualification, tender lists, tender analysis, reports, and contract documentation.
• Support change control and resolve post‑contract cost variances across cleanroom construction, tool‑installation packages, and facility upgrades.
• Prepare monthly cost reports and participate in cost presentations to project stakeholders.
• Contribute to value engineering exercises, identifying opportunities to optimise design, materials, and construction sequencing for semiconductor environments.
• Collaborate with clients, consultants, and multidisciplinary teams throughout all project phases, maintaining strong relationships and clear communication. 
• Support knowledge management efforts by capturing lessons learned and improving cost‑management procedures and templates.

Role Summary

A leading global organisation operating large‑scale manufacturing and industrial facilities is seeking a highly experienced Senior Cost Manager to oversee cost governance across complex construction, upgrade, and expansion projects. This role is ideal for professionals who excel in cost planning, commercial management, and strategic stakeholder engagement in fast‑paced, high‑precision industrial environments.

You will play a pivotal part in ensuring that major capital projects—including facility expansions, process line installations, cleanroom upgrades, and infrastructure enhancements—are delivered with strong cost control and financial discipline.

Job Responsibilities

Team Leadership & People Development

• Foster a high‑performance culture built on integrity, professionalism, and collaboration.
• Guide, mentor, and motivate team members to drive strong project results.
• Support onboarding and integration of new hires into project workflows.

Client & Stakeholder Management

• Lead cross‑functional teams involving engineering, manufacturing, procurement, consultants, and contractors.
• Build trusted working relationships with key stakeholders through consistent communication.
• Help resolve conflicts and provide practical, solutions‑driven recommendations.
• Manage structured communications, including progress meetings, reporting, and documentation.

Strategic Cost Planning & Project Setup

• Review and challenge project scopes, budget assumptions, and cost deliverables—seeking innovative approaches to maximise value.
• Develop comprehensive cost reporting frameworks and robust control mechanisms.

Cost Controls & Project Reporting

• Act as Commission Manager, overseeing the entire cost management lifecycle for large or multiple industrial projects.
• Lead estimating and cost‑planning activities, including ownership of the final cost plans.
• Prepare and present monthly post‑contract cost reports to senior stakeholders.
• Drive value engineering and life cycle costing exercises tailored for manufacturing environments.
• Implement integrated controls across schedule, cost, risk, and change management.

Commercial, Financial & Risk Management

• Lead commercial negotiations and contract administration in partnership with commercial and procurement teams.
• Ensure compliance with internal risk procedures, client care processes, and contract databases.
• Coordinate with finance teams to align billing cycles with project milestones and client requirements.