As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

• Implement and monitor site-specific HSE policies and procedures in line with local regulations and project requirements
• Conduct daily site inspections, audits, and safety walkabouts to identify hazards and ensure compliance
• Lead toolbox talks, safety briefings, and training sessions for site personnel and subcontractors
• Ensure proper use of PPE (Personal Protective Equipment) and enforce safety protocols at all times
• Investigate incidents, near-misses, and accidents, and prepare detailed incident reports and corrective actions
• Coordinate with project managers, engineers, contractors, and clients to maintain a safe work environment
• Oversee high-risk activities such as working at heights, confined spaces, electrical works, and chemical handling
• Maintain and update all safety documentation, permits-to-work, and compliance records
• Support emergency response planning and drills

To ensure the quality, functionality and reliability of a product before it released to the customer by identifying and diagnosing defects and issues

Key Responsibilities

• Setup new product & improve test strategies for existing products, to perform program test time reduction for capacity improvement & test yield improvement in production.
• Support QA team on analyze customer failure samples & provide countermeasure program for detect future similar failure slip through to customer.
• Provide training to technician group for smoothening daily repairing work.
• Troubleshooting test board/ tester if IC failure occur & provide permanent countermeasure.
• Ensure test station operation, performance, stability & robustness. Develop plans to investigate root cause of deviations.
• Have knowledge on ATE tester platform e.g Teradyne ETS-800, Advantest T2000, T3347, Fusion-CX & LTX tester

This is an individual contribution role as a Plating Process Control Engineer in manufacturing engineering operations responsible for monitoring and controlling plating processes to ensure quality and yield targets while implementing process improvements and optimization initiatives. The role encompasses managing plating bath chemistry and refresh schedules, troubleshooting process deviations, conducting statistical analysis to support process changes, and ensuring compliance with contamination control procedures. The engineer is also expected to leverage data analytics and machine learning techniques to establish linkages between Key Process Input Variables (KPIVs) and Key Process Output Variables (KPOVs), enabling predictive process control and data-driven decision making. Key technical competencies include understanding electroplating principles and chemistry, knowledge of semiconductor manufacturing processes, experience with process control systems and data analysis, and familiarity with cleanroom operations and safety protocols. The engineer also participates in FMEA activities, risk assessments, and supports change control processes such as PCN and TECN to maintain operational excellence in plating operations.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Focal person for plating facilities related issues, ie plating DI water trend monitoring, LPC and  
• contamination 
• Focal person of plating chemical planning and inventory  
• Focal person for plating pretreatment, strip line, filter change and descaling.  
• Monitor and control plating processes to ensure quality and yield targets
• Implement process improvements and optimization initiatives
• Troubleshoot process deviations and implement corrective actions, which include thickness control, anodic protection
• Troubleshoot line to line variation and implement corrective actions
• Ensure compliance with contamination control procedures
• Participating in FMEA activities and risk assessments
• Monitor and improve plating OEE performance
• Implement process optimizations to reduce speed losses and improve efficiency
• Track and analyze OEE metrics to identify improvement opportunities
• Support implementation of process parameter revisions to enhance OEE
• Identify, define, and document KPIVs and KPOVs for plating processes and establish data-driven linkages between them
• Develop and maintain process monitoring dashboards using data analytics tools to visualize KPIV-KPOV relationships
• Apply machine learning models (e.g., regression, classification, anomaly detection) to predict process outcomes and enable proactive process control
• Collaborate with data engineers or IT teams to integrate manufacturing data from equipment and sensors into analytics platforms
• Utilize statistical process control (SPC) and advanced analytics to detect processes that drift and trigger timely corrective actions

Responsible for planning, ordering, and coordinating packaging materials from suppliers to ensure smooth production operations without shortages or delays. Manage backlog and shipment to ensure meeting OTD and shipment revenue plan.

Key Responsibilities

•   Plan and place purchase orders for packaging materials (cartons, labels, carrier tape, cover tape, trays, tubes etc.)
• Monitor inventory levels and forecast material requirements based on production plans
• Coordinate with suppliers on delivery schedules and ensure on-time delivery
• Follow up on order status, delays, and shortages
• Work closely with production, warehouse, and logistics teams
• Maintain accurate purchasing records and documentation
• In-house production line planning and test WIP management
• Support manufacturing to meet all test out plan and KPI goals

Responsible for timely machine installation and ensuring optimal production operations by maintaining equipment and enhancing yield, utilization, and product quality.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform machine installation as per schedule.
• Maintaining the smooth operation of production and optimizing yield, utilization, and product quality through machine sustaining and maintenance.
• Diagnose and troubleshoot equipment malfunctions, identifying root causes and implementing effective solutions.
• Monitor equipment performance indicators and implement corrective actions to address deviations from performance targets.
• Adhere to all safety regulations and protocols while performing maintenance and repair tasks, ensuring a safe working environment for all team members.
• Update machine status from outgoing shift to incoming shift.

- Working 12 hour shift. 

- Perform Machines Preventive Maintenance and up keep maintenance record

- First line of defence to attend machines un-schedule down or quality issue

- Team player. Communicate to different departments for collaboration for operational efficiency. 

- In depth knowledge with Automation/Control System.

- Able to handle sudden changes and pressure to bring up machine in short notice. 

- Capable to elaborate and provide feedback on major equipment down times. Chronological events and actions taken. 

- Statistical Process Control knowledge is an added advantage. 

- Understanding of Machine Software such as PLC or C++ will be added advantage in technical capability. 

Duties and Responsibilities:

• Manage end-to-end recruitment across multiple APAC markets (e.g., Malaysia, Singapore, Thailand, China, Indonesia, Vietnam)
• Lead intake discussions with hiring managers to understand hiring needs, workforce plans, and timelines
• Develop and execute proactive sourcing strategies, including direct sourcing of passive candidates
• Manage multiple requisitions in a fast-paced, high-volume environment
• Screen and assess candidates against job requirements and ensure strong candidate pipelines
• Coordinate and manage the full interview process
• Partner with hiring managers on hiring decisions and offer recommendations
• Maintain strong candidate engagement and provide timely communication throughout the process
• Deliver hiring outcomes in line with agreed service levels (e.g., time-to-fill targets)
• Contribute to a collaborative team environment and share best practices

• Learn and apply data intelligence & machine learning concepts
• Build real-world RPA automation flows (Power Automate, Python)
• Support smart factory data analysis and anomaly detection
• Develop problem-solving skills in a semiconductor factory environment
• Collaborate on advanced AI projects for future digital transformation

• Manage end-to-end electrical project execution for a manufacturing facility, from design review to commissioning.
• Oversee electrical contractors, consultants, and vendors to ensure compliance with project scope, quality, and safety standards.
• Review electrical drawings, specifications, method statements, and shop drawings.
• Plan and monitor project schedules, budgets, and resource allocation.
• Ensure compliance with local authorities, codes, and standards (e.g. Suruhanjaya Tenaga, IEC, MS standards).
• Coordinate with civil, mechanical, process, and EHS teams to ensure seamless project delivery.
• Conduct site inspections, progress meetings, and risk assessments.
• Manage testing, commissioning, and handover documentation.
• Identify and mitigate project risks, technical issues, and delays.
• Prepare regular project status reports for stakeholders.

The AOI (Automated Optical Inspection) Engineer is responsible for optimizing, and maintaining AOI inspection processes in manufacturing environments. This role ensures product quality by improving inspection accuracy, reducing false calls, analyzing defects, and supporting continuous process improvement. The AOI Engineer works closely with Production, Quality, and Process Engineering teams to achieve high yield, reliability, and customer satisfaction

Key Responsibilities

• implement, and optimize manufacturing processes to improve productivity, quality, and efficiency.
• Monitor production performance and analyze process data to identify improvement opportunities.
• Support New Product Introduction (NPI) activities, including process setup, validation, and documentation.
• Work closely with Production, Quality, Maintenance, and Engineering teams to resolve manufacturing issues. failures, and implement corrective actions.
• Execute, and improve Inspection procedures and systems.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Accomplish scheduled daily preventive maintenance of tools inside cleanroom environment.
• Perform simple troubleshooting and repair activities of tools with breakdown following guidance from maintenance head.
• Ensure machine maintenance check sheets are filled out in a timely manner.
• Execute cost reduction initiatives spearheaded by engineers.
• Perform other duties as assigned by immediate superior.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Accomplish scheduled daily preventive maintenance of tools inside cleanroom environment.
• Perform simple troubleshooting and repair activities of tools with breakdown following guidance from maintenance head.
• Ensure machine maintenance check sheets are filled out in a timely manner.
• Execute cost reduction initiatives spearheaded by engineers.
• Perform other duties as assigned by immediate superior.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Responsible to sustain test equipment with minimal downtime.
• Provides Manufacturing and Equipment support needs in a rapidly changing development and high volume manufacturing environment.
• Dismantles, adjusts, repairs, and assembles equipment according to schematics, repair manuals, or specifications.
• Performs preventive maintenance, repairs, and troubleshooting diagnosis on production equipment.
• Resolves non-standard problems, works with minimal supervision, and can adjust to rapidly changing priorities.
• Must be a self-starter capable of managing own activities as well as supporting team activities.
• Works with Engineering to support new equipment installations and improvement initiatives.
• Responsible for improving and sustaining the equipment capability and meet the KPI (Availability, OEE and Yield)
• Assist engineer during DOE and improvement project.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be responsible for Die Prep equipment day to day line sustaining, PM and conversion.
• Able to hands on and provide systematic problem analysis.
• Ability to troubleshoot, analyze complex problems and 5 WHY analysis.
• Be available for overtime work as of when needed.
• Experience in PM and major down troubleshooting.
• Responsible to liaise with process engineering team for low yield triggering.

The Supervisor is responsible for supporting daily NPI operations to ensure NPI targets are met in terms of build plan, product quality, productivity, and cost. This role oversees manufacturing performance indicators, manpower coordination, logistics execution, and continuous improvement initiatives, while ensuring compliance with safety, quality, and system requirements.

The incumbent plays a key role in driving operational excellence, sustaining factory performance, and leading improvement projects to achieve business objectives.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Ensure production execution for NPI meets the build plan, quality standards, and delivery commitments.
• Monitor, analyze, and improve manufacturing performance indicators, inactive lots, productivity, incidental losses, logistics performance, 6S, and cost.
• Coordinate logistics activities to support NPI production yield and ensure execution follows the approved plan.
• Manage and control NPI build schedules to meet allocated timelines and output targets.
• Sustain production housekeeping, 6S practices, and support special operational tasks as required.
• Monitor and manage inactive lot indicators to minimize work-in-progress and delays.
• Coach, supervise, and optimize headcount utilization; balance shift manpower to meet production needs.
• Lead and manage continuous improvement and manufacturing projects from planning through execution and closure.
• Track project progress, prepare reports, and present results to management.
• Ensure compliance with system and customer requirements, including IMS, 8D problem-solving, and RBA standards.
• Ensure all activities comply with company policies, safety regulations, and quality standards.

BROAD  FUNCTIONS : 

• Lead a group of Equipment and Process Technicians
• Attend various Equipments and Process daily issue.
• Ensuring Preventive Maintenance schedule carry out by Technicians.
• Required excellent communication skills for various inter department communications
• Suggest and executive Continuous Improvement on equipments down time or improve operational efficiency.

RESPONSIBILITIES : 

• Attend various Daily Meeting. 2x per shift
• Work load assigning base on production schedule for various equipment.
• Respond to any escalation from technicians from unscheduled down time or process KPOV.
• Montitor and respond to QC escalation from Test’s KPOV.
• Respond and follow up on Quality Incidents on-hold and disposition.
• Responsible to Technicians career path planning and performance designation.
• Attend various training course for technical and soft skills.
• Become Emergency Response Team member
• Conduct Fire Drill Evacuation Exercise
• Involve Management System Audit

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Equipment Maintenance and Repair:

• Sustain backend equipment backend equipment - Package saw, Solder ball attach, Laser cut , Laser mark and AOI uptime above the targeted goals.
• Troubleshoot and repair equipment to ensure smooth production operations.

Preventive Maintenance:

• Complete all scheduled Preventive Maintenance (PM) activities and equipment conversions within the stipulated time.
• Ensure zero post-maintenance issues.

Performance Metrics:

• Maintain and improve Mean Time Between Alarms (MTBA), Repeat Alarm metrics, and Overall Equipment Effectiveness (OEE) to meet or exceed set targets.

Continuous Improvement:

• Identify and address recurring issues to enhance equipment reliability and efficiency.
• Collaborate with the engineering team to implement process improvements.

Documentation and Reporting:

Maintain detailed records of maintenance activities, repairs, and equipment performance.

Generate and submit reports on equipment status and any deviations from goals.

Safety and Compliance:

• Adhere to safety protocols and ensure all maintenance activities comply with company and regulatory standards.
• Participate in Safety, 6S audits and training sessions.

• Lead and manage CSA construction activities
• Coordinate with design, engineering, procurement, and other construction disciplines to ensure seamless project execution.
• Review and validate CSA design documents, drawings, and specifications.
• Oversee site preparation, foundation, structural steel, concrete, architectural finishes, and cleanroom construction.
• Ensure compliance with local building codes, safety regulations, and environmental standards.
• Manage subcontractors and vendors, including scheduling, performance monitoring, and issue resolution.
• Conduct regular site inspections and quality audits.
• Track progress, manage change orders, and report on project status to stakeholders.
• Collaborate with internal teams and external consultants to resolve technical and construction challenges.
• Drive continuous improvement in construction methods, safety practices, and cost efficiency.

• Understand product PLM systems and maintain databases with high accuracy (Agile / SCORE / Ariba).
• Develop monthly capacity forecast models for Penang, subcontractors, Dresden, and internalization.
• Prepare factory capacity plans to support revenue targets.
• Lead monthly gross margin improvement projects, including continuous capacity improvement and internalization to internal factories.
• Proactively identify capacity improvement opportunities and collaborate with cross‑functional teams to execute action plans.
• Perform on-the-job monitoring of bottleneck equipment to ensure revenue plans are met.
• Conduct time studies for all processes (Sort, Test, Backend).
• Perform labor resource studies, planning, and optimization.
• Manage internalization project transfers from REN Power and REN P&C.
• Prepare and support company project transfer activities.
• Support NPI (New Product Introduction) project bidding.
• Develop and review factory layouts using AutoCAD.
• Understand, monitor, and improve equipment OEE, including performance maintenance. 

• Perform all tasks assigned by the immediate superior in accordance to the specifications and schedule.
• Plan and organize use of resources effectively to meet OEE, productivity, internal failure cost target.
• Work with all levels of the organization to improve quality levels, providing customer with “Zero Defect Product” and “100% On-Time Delivery”.
• To translate the company’s objective into department goals and ensure the goals are cascaded to Production line leader and operator levels.
• Create an environment that is culturally embedded in a “Quality First” mentality.
• To maintain records for all downtime and to clinically analyze the lost opportunity for improvement.
• To initiate project, evaluation and study for capacity and quality improvement.
• To follow up and summarize the entire pilot builds failure into “OPEN POINT LIST”.
• Instill a continuous improvement mentality to production line leader and operator level.
• Establish performance indicators and evaluate production line leader and operator level.
• To Lead “CIP” production daily management meeting.
• To liaise with TEF group for improvement.
• To perform the production line process confirmation.
• To provide support and guidance to line leaders, technicians and operators on their daily tasks.
• To ensure production line leaders, technicians and operators follow quality control procedure and all the BPS activities and procedures.
• Review line leaders, technicians and operators performance on quarterly basic and provide Guidance to improve his/her performance.
• Coordinate and follow up various departments to ensure smooth execution day to day activities.
• Responsible for year end physical inventory count.
• Enforce safety and 5’S activity assigned by superior.
• To evaluated and prepared year end GPD for subordinates.
• Any other duties assigned by the immediate superior from time to time.

Primary Duties & Responsibilities

• Lead shift coordinators across Cleaning, Sputter, and Lube to ensure smooth operations.
• Review and prepare pass-down reports for incoming shifts.
• Act as backup to the Operations Manager when required.
• Conduct daily production meetings and deliver shift updates.
• Ensure strict compliance with rules, regulations, and SOPs.
• Plan and deploy manpower effectively to meet production needs, manage attendance and discipline, schedule overtime when required.
• Assist the Production Manager in executing daily operations and achieving production targets.
• Monitor machine utilization and line performance to meet output requirements.
• Escalate issues proactively to relevant PICs and management.
• Manage and clear over-WIP inventory, coordinate with Manufacturing Engineers on disposal of problematic lots.
• Perform MESA transactions, WIP tracking, and meet PI Count audit with zero discrepancy.
• Ensure compliance with IMS/RBA standards and maintain exemplary conduct.
• Lead line audits and enforce 7S housekeeping practices.
• Ensure products meet required quality, safety, and customer standards.
• Participate in FMEA, 8D, and SPC activities.
• Support cross-functional teams and take on additional operational responsibilities as needed.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Responsible to Supervise overall SSD production area, that covering SMT, Test and Backend.
• Provide clear, regular communication of production priorities, challenges, and status across the shift to meet production schedules, goals and objectives.
• Directly manage Operators Team, routinely provide guidance on career development in your team and regularly conducting performance management. engagement activities and monitor attendance.
• Responsible for labor planning and allocation between processes, 6S, line cleanliness, tardiness and training.
• Collaborate with Engineering/Supporting Team to solve day-to-day excursion, implement line process changes or new implementations for improvements.
• Periodically audit production adherence to visual aids and standard instructions.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• To plan, coordinate and follow-up sputter systems start-up / conversion activities and process documentation.
• To audit sputter parameters and practice periodically, include online SPC and procedure conformance.
• To lead sputter process related issues trouble shooting (common causes), work closely with shift process team in sputter process sustaining, trouble shooting & improvement in order to achieve sputter utilization (down time), yield & quality goal.
• To lead Sputter Process Improvement Projects (SU/STT/Cost/Quality/PPH & others), which include new products/machines/process qualification.
• To lead, supervise and coach/train process tech, include engineering specialist and characterize technicians.
• Responsible for sputter process related issues trouble shooting (common causes), work closely with Shift process team in sputter process sustaining, trouble shooting & improvement in order to achieve sputter utilization (down time) & quality goal.
• Responsible to lead, supervise and coach/train process tech, include engineering specialist and characterize technicians. Responsible to train and share PMR/DS sputter process and yield improvement knowledge with the team.
• Responsible for sputter parameters monitoring, include online SPC monitoring and procedure conformance.
• Responsible for sputter machine start-up include process characterize (new products & process changes).
• Responsible for new products/machines/process qualification.
• Responsible for sputter process improvement projects (SU/STT/Cost/Quality/PPH & others).

Others include FMEA.

• Understand and accept responsibility for performing jobs safely
• Follow safety and health rules
• Responsible to assist in sputter yield related issues trouble shooting (common causes).
• Work closely with Anelva yield team in sputter yield sustaining, trouble shooting & improvement in order
• to achieve sputter yield goal. This includes 0725 Operation Yield Improvement.
• Other supervisor assigned task
• Improve Media magnetic baseline: ACC% and to enable process stability and repeatability via recipe tuning and optimization.
• Responsible for new product qualifications.  

The job involves leading shift coordinators in production operations to ensure smooth workflows, compliance with regulations, and achievement of targets. Responsibilities include managing manpower, conducting daily meetings, monitoring machine performance, handling inventory issues, and maintaining quality and safety standards, while also supporting cross-functional teams and participating in various operational activities as needed.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead shift coordinators across Cleaning, Sputter, and Lube to ensure smooth operations.
• Review and prepare pass-down reports for incoming shifts.
• Act as backup to the Operations Manager when required.
• Conduct daily production meetings and deliver shift updates.
• Ensure strict compliance with rules, regulations, and SOPs.
• Plan and deploy manpower effectively to meet production needs, manage attendance and discipline, schedule overtime when required.
• Assist the Production Manager in executing daily operations and achieving production targets.
• Monitor machine utilization and line performance to meet output requirements.
• Escalate issues proactively to relevant PICs and management.
• Manage and clear over-WIP inventory, coordinate with Manufacturing Engineers on disposal of problematic lots.
• Perform MESA transactions, WIP tracking, and meet PI Count audit with zero discrepancy.
• Ensure compliance with IMS/RBA standards and maintain exemplary conduct.
• Lead line audits and enforce 7S housekeeping practices.
• Ensure products meet required quality, safety, and customer standards.
• Participate in FMEA, 8D, and SPC activities.
• Support cross-functional teams and take on additional operational responsibilities as needed.