Total 23 job vacancies by Sandisk

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Accomplish scheduled daily preventive maintenance of tools inside cleanroom environment.
• Perform simple troubleshooting and repair activities of tools with breakdown following guidance from maintenance head.
• Ensure machine maintenance check sheets are filled out in a timely manner.
• Execute cost reduction initiatives spearheaded by engineers.
• Perform other duties as assigned by immediate superior.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Accomplish scheduled daily preventive maintenance of tools inside cleanroom environment.
• Perform simple troubleshooting and repair activities of tools with breakdown following guidance from maintenance head.
• Ensure machine maintenance check sheets are filled out in a timely manner.
• Execute cost reduction initiatives spearheaded by engineers.
• Perform other duties as assigned by immediate superior.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Support IQA and QC equipment operation to ensure smooth daily production and inspection activities.
• Perform basic troubleshooting and 1st-level recovery for IQA/QC equipment and testers.
• Support setup, installation, buyoff, and verification activities for new IQA and QC equipment.
• Able to operate and support inspection and quality control equipment.
• Maintain equipment log sheets, calibration records, preventive maintenance schedules, and documentation.
• Coordinate with Engineering, Quality, Production, and Operations teams to support inspection and quality activities.
• Monitor equipment condition and escalate abnormal issues for timely corrective actions.
• Ensure compliance with 6S practices, ESD requirements, safety procedures, and lab/shopfloor housekeeping standards.
• Support equipment uptime improvement and minimize downtime through proper maintenance coordination.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Maintain reliability test equipment and chambers, ensuring smooth operation and minimal downtime.
• Perform basic troubleshooting and 1st-level recovery for equipment and tester issues.
• Support equipment setup, buyoff, and verification for new tools and reliability testers.
• Able to operate (e.g., HAST, TC, Vibration Tester, Bend Tester )
• Maintain accurate log sheets, calibration records, and preventive maintenance schedules.
• Collaborate closely with cross-functional teams (Engineering, Quality, Operations) to support testing needs and resolve equipment-related issues.
• Ensure adherence to 6S standards, lab housekeeping, and safety protocols.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Responsible to audit line per IPQC Checklist and Work Instruction, compile & analyze IPQC audit results weekly and drive for compliances.
• Responsible to conduct buy off during conversion for items like component traceability, feeder, profile etc.
• Responsible in monitoring the process control in place for critical process.
• To participate in and monitor NPI activities (including tape board buy off).
• Monitor QA Line Stop activity daily and follow up and verify on effectiveness of corrective Action/closure.
• Responsible to perform testing and troubleshooting of circuits, components, instruments and mechanical assemblies. Managing Ongoing Reliability Test (ORT) and Outgoing Quality Assurance (OQA) inventory.
• Raise quality alert for line awareness when comes to line excursion or customer feedback.
• Other task assigned by superior.

• Perform reliability testing to support production excursion evaluations and SIP package qualifications.
• Execute routine reliability monitoring for qualification and mass production, ensure accurate and timely data recording.
• Maintain up-to-date log sheets and documentation for all reliability test activities.
• Ensure full data traceability to support audits, reviews, and compliance requirements.
• Conduct first-level validation and preliminary analysis on reliability test failures.
• Escalate abnormal findings, equipment issues, or test deviations promptly to responsible engineers.
• Operate, monitor, and manage reliability test equipment and chambers (e.g., HAST, Temperature Cycling) in accordance with defined loading plans and procedures.
• Record, compile, and report reliability test results accurately and within defined timelines.
• Communicate effectively with engineers and stakeholders regarding test status, issues, and progress updates.
• Monitor and maintain reliability lab inventory, including test samples, consumables, tools, and equipment.
• Perform periodic inventory checks and ensure inventory records are accurate and up to date.
• Collaborate with requestors on test unit handling, disposition, and status tracking.
• Ensure adherence to laboratory safety guidelines, standard operating procedures (SOPs), and quality requirements.

We are seeking a detail-oriented and analytical Component DFM Engineering Technician to join our team in Seberang Prai Batu Kawan, Malaysia. 

• Responsible to review and validate the new component request whether it is conformance to internal process requirements and other DFM criteria.
• Responsible to review, validate and buyoff for 2nd/ALT source versus the primary source in term of DFM perspective.
• Able to perform DFM assessment on components with respect to packaging structure, process interaction and reliability.
• Involve in NUDD assessment focusing on components and could be extended to complete product PCBA level.
• Perform Design for Assembly (DfA) & Design for Mechanical Assembly (DfMA) assessment to ensure product meets all assembly criteria with no quality issue.
• Establish DfMA framework that extends the coverage to all mechanical aspect including material selection, thermal dependency, new technology etc.
• Knowledge in SolidWorks application is an added advantage.
• Support Lab activities such as monitor the yearly/regular PM and CAL for each measurement machine and system.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Maintain reliability test equipment and chambers, ensuring smooth operation and minimal downtime.
• Perform basic troubleshooting and 1st-level recovery for equipment and tester issues.
• Support equipment setup, buyoff, and verification for new tools and reliability testers.
• Able to operate (e.g., HAST, TC, Vibration Tester, Bend Tester )
• Maintain accurate log sheets, calibration records, and preventive maintenance schedules.
• Collaborate closely with cross-functional teams (Engineering, Quality, Operations) to support testing needs and resolve equipment-related issues.
• Ensure adherence to 6S standards, lab housekeeping, and safety protocols.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Accomplish scheduled daily preventive maintenance of tools inside cleanroom environment.
• Perform simple troubleshooting and repair activities of tools with breakdown following guidance from maintenance head.
• Ensure machine maintenance check sheets are filled out in a timely manner.
• Execute cost reduction initiatives spearheaded by engineers.
• Perform other duties as assigned by immediate superior.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be responsible for Die Prep equipment day to day line sustaining, PM and conversion.
• Able to hands on and provide systematic problem analysis.
• Ability to troubleshoot, analyze complex problems and 5 WHY analysis.
• Be available for overtime work as of when needed.
• Experience in PM and major down troubleshooting.
• Responsible to liaise with process engineering team for low yield triggering.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Accomplish scheduled daily preventive maintenance of tools inside cleanroom environment.
• Perform simple troubleshooting and repair activities of tools with breakdown following guidance from maintenance head.
• Ensure machine maintenance check sheets are filled out in a timely manner.
• Execute cost reduction initiatives spearheaded by engineers.
• Perform other duties as assigned by immediate superior.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Responsible to sustain test equipment with minimal downtime.
• Provides Manufacturing and Equipment support needs in a rapidly changing development and high volume manufacturing environment.
• Dismantles, adjusts, repairs, and assembles equipment according to schematics, repair manuals, or specifications.
• Performs preventive maintenance, repairs, and troubleshooting diagnosis on production equipment.
• Resolves non-standard problems, works with minimal supervision, and can adjust to rapidly changing priorities.
• Must be a self-starter capable of managing own activities as well as supporting team activities.
• Works with Engineering to support new equipment installations and improvement initiatives.
• Responsible for improving and sustaining the equipment capability and meet the KPI (Availability, OEE and Yield)
• Assist engineer during DOE and improvement project.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Equipment Maintenance and Repair:

• Sustain backend equipment backend equipment - Package saw, Solder ball attach, Laser cut , Laser mark and AOI uptime above the targeted goals.
• Troubleshoot and repair equipment to ensure smooth production operations.

Preventive Maintenance:

• Complete all scheduled Preventive Maintenance (PM) activities and equipment conversions within the stipulated time.
• Ensure zero post-maintenance issues.

Performance Metrics:

• Maintain and improve Mean Time Between Alarms (MTBA), Repeat Alarm metrics, and Overall Equipment Effectiveness (OEE) to meet or exceed set targets.

Continuous Improvement:

• Identify and address recurring issues to enhance equipment reliability and efficiency.
• Collaborate with the engineering team to implement process improvements.

Documentation and Reporting:

Maintain detailed records of maintenance activities, repairs, and equipment performance.

Generate and submit reports on equipment status and any deviations from goals.

Safety and Compliance:

• Adhere to safety protocols and ensure all maintenance activities comply with company and regulatory standards.
• Participate in Safety, 6S audits and training sessions.

We are seeking a highly skilled and innovative senior engineer to lead our technical team in bringing new products to market within a dynamic environment. In this role, you will lead and contribute to the development and implementation of advanced test engineering strategies for our cutting-edge storage products. Below are the key responsibilities:

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Optimize Test Strategies: Design and execute efficient test plans, test time, yield, and quality to meet factory financial goals. Identify cost-effective testing methods through troubleshooting, validation, and continuous improvement.
• Lead and Collaborate on Engineering Solutions: Lead and implement innovative engineering solutions while collaborating with cross-functional teams to ensure project success under competitive timeline.
• Champion Innovation and Cost Efficiency: Collaboratively integrate advanced testing technologies, research, and adopt cost-saving solutions like Test Time Reduction (TTR) and new test platforms, driving CAPEX reduction. Continuously improve test programs and test infrastructure to enhance product quality and reliability.
• Technical Expertise and Support: Provide leadership in electrical failure analysis (EFA), exploring new test method/EFA technique to address RMAs, production, reliability, and DPPM improvement. Analyze test results and deliver reports to stakeholders with actionable insights for improvement.
• Technical Communication and Documentation: Develop and deliver clear, concise technical reports and documentation, including EFA, work instructions, test equipment guidelines, test reports, and specifications.
• NPI Support: Lead NPI projects, ensuring smooth transfer of test technology to mass production.
• Knowledge Sharing and Mentorship: Mentor junior engineers, promote best practices, and facilitate knowledge transfer through technical training.
   

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Operations Monitoring: Oversee semiconductor solid state drive (SSD) mechanical assembly manufacturing processes, ensuring production runs smoothly and efficiently while maintaining optimal output levels and component precision standards.
• Troubleshooting & Maintenance: Identify machine malfunctions in SSD assembly equipment, troubleshoot complex mechanical and electromechanical issues, and perform routine maintenance to minimize production disruptions and ensure assembly accuracy.
• Process Optimization: Collaborate with engineers to improve SSD mechanical assembly workflow, reduce downtime, enhance product quality, and optimize assembly sequences through continuous improvement initiatives.
• Documentation & Reporting: Compile data, create evaluation reports, and document troubleshooting findings specific to SSD assembly processes to maintain accurate equipment and process records.
• Compliance & Safety: Maintain 5S standards in SSD assembly areas, follow safety protocols for semiconductor manufacturing environments, and ensure quality standards are met across all mechanical assembly operations.
• Quality Assurance & Inspection: Conduct inspections and quality checks on SSD mechanical assemblies to ensure adherence to established specifications, dimensional tolerances, and industry standards.
• Team Collaboration: Work cross-functionally with production teams, engineers, and supervisors to resolve SSD assembly-related issues and implement process improvements.
• Training & Mentoring: Provide guidance and technical support to junior technicians on SSD mechanical assembly procedures and assist in their professional development.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be responsible for Wafer sort equipment day to day line sustaining, prober card maintenance ,PM and conversion.
• Able to hands on and provide systematic problem analysis.
• Ability to troubleshoot, analyze complex problems and 5 why analysis.
• Be available for overtime work when needed.
• Experience in PM and major down troubleshooting.
• Responsible to liaise with process engineering team for low yield triggering.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be responsible for Wafer sort equipment day to day line sustaining, prober card maintenance ,PM and conversion.
• Able to hands on and provide systematic problem analysis.
• Ability to troubleshoot, analyze complex problems and 5 why analysis.
• Be available for overtime work when needed.
• Experience in PM and major down troubleshooting.
• Responsible to liaise with process engineering team for low yield triggering.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be responsible for Wafer sort equipment day to day line sustaining, prober card maintenance ,PM and conversion.
• Able to hands on and provide systematic problem analysis.
• Ability to troubleshoot, analyze complex problems and 5 why analysis.
• Be available for overtime work when needed.
• Experience in PM and major down troubleshooting.
• Responsible to liaise with process engineering team for low yield triggering.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be responsible for Wafer sort equipment day to day line sustaining, prober card maintenance ,PM and conversion.
• Able to hands on and provide systematic problem analysis.
• Ability to troubleshoot, analyze complex problems and 5 why analysis.
• Be available for overtime work when needed.
• Experience in PM and major down troubleshooting.
• Responsible to liaise with process engineering team for low yield triggering.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Responsible to audit line per IPQC Checklist and Work Instruction, compile & analyze IPQC audit results weekly and drive for compliances.
• Responsible to conduct buy off during conversion for items like component traceability, feeder, profile etc.
• Responsible in monitoring the process control in place for critical process.
• To participate in and monitor NPI activities (including tape board buy off).
• Monitor QA Line Stop activity daily and follow up and verify on effectiveness of corrective Action/closure.
• Responsible to perform testing and troubleshooting of circuits, components, instruments and mechanical assemblies. Managing Ongoing Reliability Test (ORT) and Outgoing Quality Assurance (OQA) inventory.
• Responsible for Quality Engineering support which include reviewing WO status, establish process control, review all quality incidents, train operators on required quality process, drive for 6S.
• To compile weekly report for internal and customer review.
• Raise quality alert for line awareness when comes to line excursion or customer feedback
• Other task assigned by superior.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Do shift online support for continuous production line and ensure equipment in good performance to meet the goals on quality, yield, and cost, utilization and cycle time.
• Support the production Report the online machine status and issue to EE Leader and Engineer.
• Perform final test product conversion and do well 6S job and ensure the continued and smoothed production line.
• Support tech team to meet the goals on Machine Down time; Utilization; to improve MTBA / MTBF.
• Support Engineer for project follow up.
• Give training Operator about machine operation and to improve their working skill.
• Spare parts hand out; replacement; and make good record for tracking.
• Able support shift rotated & OT coverage.

The Technician 3, Equipment Maintenance position is a critical role within our organization, responsible for ensuring the optimal functioning of essential backend process equipment.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Conduct comprehensive electrical and mechanical troubleshooting to identify and resolve issues in non-functioning equipment crucial to backend processes.
• Provide expert manufacturing and equipment support in a dynamic, high-volume manufacturing environment characterized by rapid technological advancements.
• Meticulously dismantle, adjust, repair, and reassemble equipment in strict accordance with schematics, repair manuals, and precise specifications.
• Execute rigorous preventive maintenance protocols, perform complex repairs, and conduct in-depth troubleshooting diagnoses on production equipment to ensure maximum operational efficiency.
• Demonstrate advanced problem-solving skills to address non-standard issues, operate with minimal supervision, and adapt swiftly to shifting priorities in a fast-paced industrial setting.
• Exhibit a high degree of self-motivation and initiative, effectively managing individual responsibilities while actively contributing to team objectives.
• Collaborate closely with the Engineering department to facilitate new equipment installations and drive continuous improvement initiatives.

Responsible and capable in troubleshooting and repairing automation equipment (ARV, ARS and MMS) and ensuring this equipment are in good condition to support production capacity.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Responsible for improving and sustaining the automation equipment capability and meet the KPI (Availability, OEE, MTBA and MTBF).
• Performing and line troubleshooting and supporting daily production operation in handling auto robotic storages and auto robotic vehicles.
• Analyze equipment failure root causes and propose corrective actions.
• Ability to identify root cause and provide corrective action through use of Effective problem solving tools.
• Perform regular inspections to identify equipment root cause.
• Perform Preventive Maintenance and calibration the equipment to optimal condition.
• Maintain equipment maintenance documentation and checklist.
• Propose improvements to enhance equipment performance and reliability.
• Support equipment setup and relocation.
• Assist SME and supervisor in continuous equipment improvement projects and automation projects.
• Demonstrate a high degree of initiative, motivation, and willingness to work proactively either independently or within the team. 
• To meet MTBA, UPH and down time.
• To sustain and maintain 6S and PM activities.
• Quality issue investigation & CA monitoring.
• Ensure and manage all the automation components good condition to support production.