Total 100 Maintenance / Repair / Technician job vacancies in Persiaran Bayan Indah

Responsibilities:

• Carry out electrical wiring works, including cable pulling, cable trunking, conduit installation, and termination.
• Install safety and distribution components (e.g. switches, resistors, circuit-breaker panels etc.).
• Connect wiring in electrical circuits and networks ensuring compatibility of components.
• Prepare and assemble conduits and connect wiring through them.
• Assist engineers in inspection, testing, troubleshooting, and rectification of electrical wiring systems and control panels.
• Read, understand, and follow electrical diagrams, wiring schematics, and control drawings.
• Support site installation, testing, commissioning, and maintenance activities.
• Ensure all electrical works are carried out in compliance with project specifications, safety regulations, and workmanship standards.
• Participate in project work at factory, mill, plant, or customer site as assigned.
• Undertake ad-hoc duties and technical assignments as required by the company from time to time.
• Ensure tools and equipment are in good condition.

Requirements:

• Minimum 2 years of working experience in electrical wiring, panel wiring, site installation, or related industrial electrical works will be an added advantage.
• Able to read and understand electrical drawings, control diagrams, and wiring schematics.
• Responsible, disciplined, and able to work both independently and as part of a team.
• Good attitude, teamwork, and communication
• Familiar with industrial electrical systems and automation-related work will be an added advantage.
• Committed to safety, quality, and proper documentation.

Perks & Benefits:

• Company Uniform
• Safety Shoes / PPE
• Personal development opportunities
• Paid training and development
• EPF / SOCSO / EIS (subject to employment terms)
• Overtime claim where applicable
• Annual Leave
• Medical Leave

職責：

• 操作、維護和排除工廠公用設施系統的故障，包括電力分配、壓縮空氣系統、冷凍水和冷卻系統、暖通空調、氣體供應、洗滌器系統和廢水處理廠 (WWTP) 設備。
• 進行水樣採集和基本實驗室測試（例如，pH值、COD、BOD、TSS），分析結果，並根據需要調整化學投加量，以確保符合標準。
• 確保生產線和關鍵設備公用設施的穩定持續供應。
• 監控公用設施運作並識別異常情況，以防止生產停機。
• 依主管安排，執行一般維護和雜務任務。
• 對所有設施和公用設備執行預防性維護（PM）活動。
• 在盡量減少對生產幹擾的情況下，進行故障排除和糾正性維修。
• 找出反覆出現的問題，並支持根本原因分析和糾正措施的實施。
• 在生產時間內提供現場技術支援。
• 對任何影響生產的設施相關問題及時作出反應。
• 從設施角度協助機器安裝、搬遷和調試。
• 確保符合環境、健康與安全、消防安全和監管要求。
• 遵守停機/啟動程序、工作許可製度和承包商安全準則。
• 支援內部稽核、客戶審計和監管檢查。
• 參與緊急應變情況（例如，停電、瓦斯外洩、火警、漏水）。
• 準確記錄維護情況、故障報告和公用事業消耗。
• 支持 5S 管理實踐，保持設施區域的良好衛生狀況。
• 為設施相關的緊急情況提供隨叫隨到或輪班支援。
• 執行公司指派的其他任何任務。

要求：

• 工程專業（電氣、機械、機電一體化或相關領域）最低文憑或證書。
• 至少有 1-3 年工廠設施、公用設施或維護環境的工作經驗。
• 具備電力分配、暖通空調、壓縮空氣、冷凍水和廢水處理系統等設施系統的基本知識。
• 具備對設備進行基本故障排除和維護的能力。
• 熟悉預防性維護（PM）措施和安全規程。
• 了解 EHS（環境、健康與安全）要求和監管標準者優先考慮。
• 能夠適應快節奏的製造環境並滿足生產需求。
• 願意在需要時輪班工作、隨叫隨到或在緊急情況下工作。
• 良好的團隊合作、溝通和解決問題的能力。
• 責任感強，自律性高，能夠在極少監督下獨立工作。

福利待遇

• 津貼
• 醫療保險
• 開放文化

Responsibilities:

• Operate, maintain, and troubleshoot factory utility systems, including electrical power distribution, compressed air systems, chilled water and cooling systems, HVAC, gas supply, scrubber systems, and wastewater treatment plant (WWTP) equipment.
• Perform water sampling and basic laboratory testing (e.g., pH, COD, BOD, TSS), analyze results, and adjust chemical dosing as required to ensure compliance with standards.
• Ensure a stable and continuous supply of utilities to production lines and critical equipment.
• Monitor utility performance and identify abnormalities to prevent production downtime.
• Carry out general maintenance and handyman tasks as assigned by the supervisor.
• Execute preventive maintenance (PM) activities for all facility and utility equipment.
• Perform troubleshooting and corrective repairs with minimal disruption to production.
• Identify recurring issues and support root cause analysis and implementation of corrective actions.
• Provide on-site technical support during production hours.
• Respond promptly to any facility-related issues affecting production.
• Assist in machine installation, relocation, and commissioning from a facilities perspective.
• Ensure compliance with EHS, fire safety, and regulatory requirements.
• Adhere to shutdown/startup procedures, permit-to-work systems, and contractor safety guidelines.
• Support internal audits, customer audits, and regulatory inspections.
• Participate in emergency response situations (e.g., power failure, gas leaks, fire alarms, water leaks).
• Maintain accurate records for maintenance, breakdown reports, and utility consumption.
• Support 5S practices and maintain good housekeeping in facility areas.
• Provide on-call or shift support for facility-related emergencies.
• Carry out any other duties as assigned by the Company.

Requirements:

• Minimum Diploma or Certificate in Engineering (Electrical, Mechanical, Mechatronics, or related field).
• At least 1–3 years of working experience in factory facilities, utilities, or maintenance environment.
• Basic knowledge of facility systems such as electrical distribution, HVAC, compressed air, chilled water, and wastewater treatment systems.
• Ability to perform basic troubleshooting and maintenance of equipment.
• Familiarity with preventive maintenance (PM) practices and safety procedures.
• Knowledge of EHS (Environment, Health & Safety) requirements and regulatory standards is an added advantage.
• Ability to work in a fast-paced manufacturing environment and support production needs.
• Willing to work on shifts, on-call, or during emergency situations when required.
• Good teamwork, communication, and problem-solving skills.
• Responsible, disciplined, and able to work independently with minimal supervision.

Perks & Benefits

• Allowance
• Medical insurance
• Open culture

職責：

• 進行電氣線路施工，包括電纜敷設、電纜線槽安裝、導管安裝和終端連接。
• 安裝安全和配電組件（例如開關、電阻器、斷路器面板等）。
• 連接電路和網路中的線路，確保組件的相容性。
• 準備並組裝導管，並將電線穿過導管連接。
• 協助工程師對電氣線路系統和控制面板進行檢查、測試、故障排除和維修。
• 能夠閱讀、理解並遵循電路圖、接線圖和控制圖。
• 支援現場安裝、測試、調試和維護活動。
• 確保所有電氣工程均依照工程規範、安全法規和製程標準進行。
• 根據安排，參與工廠、軋鋼廠、車間或客戶現場的專案工作。
• 根據公司要求，不時承擔臨時性工作和技術性任務。
• 確保工具和設備狀況良好。

要求：

• 至少 2 年電氣佈線、配電盤佈線、現場安裝或相關工業電氣工作經驗者優先考慮。
• 能夠閱讀和理解電氣圖、控制圖和接線圖。
• 責任心強，自律性高，既能獨立工作，也能作為團隊成員協作。
• 良好的態度、團隊合作精神和溝通能力
• 熟悉工業電氣系統和自動化相關工作者優先考慮。
• 致力於安全、品質和規範的文檔記錄。

福利待遇：

• 公司製服
• 安全鞋/個人防護裝備
• 個人發展機會
• 有薪培訓和發展
• 公積金/社保/就業保險（視僱用條款而定）
• 如適用，可申請加班費。
• 年假
• 病假

Pentrac Itron is seeking a conscientious Electronic & Electrical Technician that will be in charge of performing standard calibration processes on a variety of specialized equipment and responsible for recording and analyzing the results. 

The main role of the Electronic & Electrical Technician is to troubleshoot, problem solve and provide technical information to allow informed decision-making. The role will involve assisting technical teams with recommendations to resolve laboratory problems, roadblocks or equipment malfunctions that impact the performance or validity of testing. 

Job Duties:

• Calibration of equipment, including troubleshooting, problem isolation & provide technical information for customer to make decision wisely.
• Maintenance of the various calibration equipment and platforms.
• Manage record retention for all Calibration Lab operations as needed.
• Identify non-conforming works related to calibration and report to Manager.
• Cal factors data entry.
• Compile reports for customer notification or problem resolution.
• Perform safety tests on equipment.

Perks & Benefits

• 13th Month Bonus
• Allowance (transportation, meal etc.)
• Central location
• Casual dress code
• Medical insurance
• Personal leave
• Performance Incentive

Pentrac Itron 正在尋找一位認真負責的電子電氣技術員，負責對各種專用設備執行標準校準程序，並負責記錄和分析結果。

電子電氣技術員的主要職責是排除故障、解決問題並提供技術信息，以支援決策。該職位需要協助技術團隊提出建議，以解決影響測試性能或有效性的實驗室問題、障礙或設備故障。

工作職責：

• 設備校準，包括故障排除、問題隔離，並向客戶提供技術信息，以便他們做出明智的決策。
• 各種校準設備和平台的維護。
• 根據需要管理所有校準實驗室操作的記錄保存。
• 找出與校準相關的不合格工作並向經理報告。
• 校準因子資料錄入。
• 編制報告，用於通知客戶或解決問題。
• 對設備進行安全測試。

福利待遇

• 第13個月獎金
• 津貼（交通、餐飲等）
• 中心位置
• 休閒著裝要求
• 醫療保險
• 個人休假
• 績效激勵

REQUIRED:

• Diploma in any Engineering

PREFERRED:

• Work on a 12-hour shift rotation.

• Perform machine preventive maintenance and maintain accurate maintenance records.

• Act as the first line of response for unscheduled machine downtime and quality-related issues.

• Collaborate effectively with cross-functional departments to support operational efficiency.

• Able to respond to sudden changes and work effectively under pressure to restore machine operations within a short timeframe.

SKILLS:

• Capable of analyzing and providing detailed feedback on major equipment downtime, including chronological events and corrective actions taken.

• Knowledge of Statistical Process Control (SPC) is an added advantage.

• Possess strong knowledge of Automation and Control Systems.

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Provide Technical training and certification for junior technician.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead daily sustaining activities for Sputter equipment to ensure high equipment uptime and optimal performance.
• Support Engineers to monitor and drive continuous improvement on key KPIs such as OEE, MTBF, MTTR, Unscheduled downtime and PM effectiveness.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.
• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Lead problem-solving sessions and provide technical guidance to junior technicians.
• Participate in spare parts review, critical spare strategy, and cost optimization initiatives.
• Ensure safety protocols and cleanroom discipline are strictly followed during maintenance activities.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

The MRE Engineering Technician is responsible for executing DET Guzik and QMT testing activities, supporting production and engineering operations through accurate data collection, analysis, troubleshooting, and tester buyoff. This role ensures test quality, equipment readiness, and timely data reporting to support continuous manufacturing performance and quality improvement.

• Perform all types of DET Guzik and QMT testing, ensuring no delays and consistent, stable measurement results that meet Test Criteria
• Compile and upload test data to Online SPC timely to meet expected Test TAT, and continuously update all test requests and tracking documentation
• Conduct tester conversion buyoff, troubleshooting, and head changes as required
• Support data package compilation for NPI, SMO, Time Slice and other requests as assigned
• Manage reference and head issuance, inventory, screening activities, and reference generation
• Communicate test information clearly during shift handovers to ensure continuity of operations
• Maintain MRE lab 7S standards, comply with all safety and health regulations, and support engineering teams as directed
• Work in cleanroom environment with rotating 12-hour shift patterns and cross-plant support as required

As Manufacturing Process Engineering Technician, you will be responsible for maintaining specific tools on a manufacturing production or NPI line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively. You will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Communicates with engineers and technical specialist regarding sputter metrology tools measurement results and calibration procedure. Able to revise any documents changes regarding sputter metrology tools.

Regular Responsibilities

• Lead shift technicians to carry out daily shift work.
• Troubleshoot and resolve sputter instrumentation issues.
• Maintain and update sputter instrument documentation including standard work procedures, process specifications, etc.
• Facilitate small process improvement projects through collection and analyzing data and monitoring engineering trials.
• Entering and compiling data relating to metrology measurement.
• Training in the functions of the new project launches.
• Always adhere to safety guidelines and cleanroom protocols.
• Carry out periodic samples housekeeping & other tasks assigned by Engineer.
• Comply and support EHS policy. Participating in company activities such as IMS, 6S, RBA, BCMS etc.

• Lead, manage and take ownership on the overall operational health of the HVAC and Mechanical system
• Maintain, operate all HVAC systems and associated equipment, plumbing systems, building management system, and equipment repairs
• Manage capacity and design changes according to the requirements from manufacturing/customers
• Conduct and execute facility system improvements on reliability hardening, safety performance as well as cost optimization and reduction
• Perform facility inspections and report on condition affecting operations.
• Monitor and supervise HVAC preventive maintenance outsource service contracts
• Maintain compliance to local city and state government requirement and overall country legal legislation, ordinances and codes of practices.
• Liaison with relevant local government agencies and contractors
• Engage and liaison with consultants on mechanical system design and construction.
• Respond to emergencies.
• Comply with all safety procedures, practices and requirements
• Support any afterhours building needs and activities as required
• Attend training sessions and seminars and other assigned tasks as requested.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

1. To establish the operation procedure, system monitoring & repair maintenance of responsible sections.
2. To review & analyze the operating data to optimize the Facilities operating system
3. To support production / manufacturing needs and request
4. To team up with all the facilities peers & contractors in troubleshooting the Facilities system
5. To identified & drive the cost saving & improvement program
6. To supervise contractor engineer and technician, routine job to ensure the HVAC & Mechanical system supporting production comply to specification and government regulation
7. Manage Mechanical System for multiple Plants.
8. To plan, organize, execute & control for the specific project
9. To ensure compliance to IMS requirement, Contamination Control, 5S & Safety
10. To liaise with contractor, consultant on the facilities related matters
11. To coordinate the major plan shutdown maintenance
12. To carry out special task as assigned by supervisor
13. To support the activities to the company needs

• Support departmental objectives and daily test operations
• Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
• Support continuous cost improvement initiatives related to test heads
• Support continuous quality improvement initiatives especially analysis on customer returns.
• Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
• Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs
• Improve product quality through early detection, prevention, and post‑test failure analysis
• Support continuous improvement of test quality triggering systems and media yield without impacting HDD performance
• Ensure all test process indicators, triggering limits, monitoring, and reaction plans are adequate and effective
• Verify, control, monitor, and propagate new processes and new equipment into PN Test
• Coordinate deployment and updates of test machine, robot, and tester software
• Assist engineers with daily operational support and special projects
• Ensure compliance with ISO standards, documentation, safety rules, and cleanroom protocols

• Support departmental objectives and daily test operations
• Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
• Support continuous cost improvement initiatives related to test heads
• Support continuous quality improvement initiatives especially analysis on customer returns.
• Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
• Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs
• Improve product quality through early detection, prevention, and post‑test failure analysis
• Support continuous improvement of test quality triggering systems and media yield without impacting HDD performance
• Ensure all test process indicators, triggering limits, monitoring, and reaction plans are adequate and effective
• Verify, control, monitor, and propagate new processes and new equipment into PN Test
• Coordinate deployment and updates of test machine, robot, and tester software
• Assist engineers with daily operational support and special projects
• Ensure compliance with ISO standards, documentation, safety rules, and cleanroom protocols

ESSENTIAL DUTIES AND RESPONSIBILITIES:

The MRE Engineering Technician is responsible for executing DET Guzik and QMT testing activities, supporting production and engineering operations through accurate data collection, analysis, troubleshooting, and tester buyoff. This role ensures test quality, equipment readiness, and timely data reporting to support continuous manufacturing performance and quality improvement.

• Perform all types of DET Guzik and QMT testing, ensuring no delays and consistent, stable measurement results that meet Test Criteria
• Compile and upload test data to Online SPC timely to meet expected Test TAT, and continuously update all test requests and tracking documentation
• Conduct tester conversion buyoff, troubleshooting, and head changes as required
• Support data package compilation for NPI, SMO, Time Slice and other requests as assigned
• Manage reference and head issuance, inventory, screening activities, and reference generation
• Communicate test information clearly during shift handovers to ensure continuity of operations
• Maintain MRE lab 7S standards, comply with all safety and health regulations, and support engineering teams as directed
• Work in cleanroom environment with rotating 12-hour shift patterns and cross-plant support as required

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

The MRE Engineering Technician is responsible for executing DET Guzik and QMT testing activities, supporting production and engineering operations through accurate data collection, analysis, troubleshooting, and tester buyoff. This role ensures test quality, equipment readiness, and timely data reporting to support continuous manufacturing performance and quality improvement.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform all types of DET Guzik and QMT testing, ensuring no delays and consistent, stable measurement results that meet Test Criteria
• Compile and upload test data to Online SPC timely to meet expected Test TAT, and continuously update all test requests and tracking documentation
• Conduct tester conversion buyoff, troubleshooting, and head changes as required
• Support data package compilation for NPI, SMO, Time Slice and other requests as assigned
• Manage reference and head issuance, inventory, screening activities, and reference generation
• Communicate test information clearly during shift handovers to ensure continuity of operations
• Maintain MRE lab 7S standards, comply with all safety and health regulations, and support engineering teams as directed
• Work in cleanroom environment with rotating 12-hour shift patterns and cross-plant support as required

The Director, Facilities & GA – APAC is responsible for leading and managing all facilities and workplace operations across the Asia-Pacific region except Japan and reporting to the General Affairs Global Head.

This role ensures safe, compliant, cost-effective, and scalable facilities operations that support business growth, workforce needs, and corporate standards, while partnering closely with HR, Finance, IT, EHS, and regional/site leadership.

Key Responsibilities

Regional Facilities Leadership

• • Provide strategic and operational leadership for all facilities activities across APAC sites (offices, R&D, manufacturing-related offices, and other locations)
  • Develop and execute regional facilities strategies aligned with global policies and business objectives
  • Act as the regional point of contact for facilities-related decision-making and escalation

Facilities Operations & Maintenance

• Oversee day-to-day facilities management, including building operations, maintenance, security, cleaning, catering, and vendor services
• Ensure consistent service levels and operational excellence across all APAC locations
• Drive standardization of processes, contracts, and service models across the region

Workplace Strategy & Projects

• Lead office openings, closures, consolidations, relocations, and expansions
• Manage workplace-related capital projects, including fit-outs, renovations, and infrastructure upgrades
• Support workplace strategy initiatives such as back-to-office programs, hybrid working environments, and space optimization

Financial & Vendor Management

• Own and manage the APAC facilities budget (Opex and Capex), including forecasting and cost control
• Lead vendor sourcing, contract negotiation, and performance management
• Identify cost-saving opportunities while maintaining required service quality and compliance

Compliance, Employee Health & Safety and Risk Management

• Ensure compliance with local regulations, company policies, and global EHS standards
• Partner with EHS teams to manage workplace safety, emergency preparedness, and risk mitigation
• Oversee audit readiness and corrective actions related to facilities and workplace compliance

Stakeholder & Cross-Functional Collaboration

• Serve as a key business partner to HR, Finance, IT, Legal, Procurement, and site leaders
• Communicate effectively with senior leadership on regional facilities status, risks, and initiatives
• Support talent growth, engagement, and productivity through effective workplace solutions

- Working 12 hour shift. 

- Perform Machines Preventive Maintenance and up keep maintenance record

- First line of defence to attend machines un-schedule down or quality issue

- Team player. Communicate to different departments for collaboration for operational efficiency. 

- In depth knowledge with Automation/Control System.

- Able to handle sudden changes and pressure to bring up machine in short notice. 

- Capable to elaborate and provide feedback on major equipment down times. Chronological events and actions taken. 

- Statistical Process Control knowledge is an added advantage. 

- Understanding of Machine Software such as PLC or C++ will be added advantage in technical capability. 

JOB SUMMARY:

The job involves supporting departmental objectives and daily testing operations, coordinating various processes to enhance specifications and improve quality and cost efficiency. Responsibilities include managing test cell processes, overseeing recipe setups, and improving product quality through early detection and failure analysis. The role also requires ensuring compliance with ISO standards and safety protocols, as well as assisting engineers with operational support and special projects. Continuous improvement in testing processes and quality systems is a key focus.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Support departmental objectives and daily test operations
• Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
• Support continuous cost improvement initiatives related to test heads
• Support continuous quality improvement initiatives especially analysis on customer returns.
• Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
• Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs
• Improve product quality through early detection, prevention, and post‑test failure analysis
• Support continuous improvement of test quality triggering systems and media yield without impacting HDD performance
• Ensure all test process indicators, triggering limits, monitoring, and reaction plans are adequate and effective
• Verify, control, monitor, and propagate new processes and new equipment into PN Test
• Coordinate deployment and updates of test machine, robot, and tester software
• Assist engineers with daily operational support and special projects
• Ensure compliance with ISO standards, documentation, safety rules, and cleanroom protocols