Total 24 service engineer job vacancies in bayan lepas penang

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

• Assist Management Representative and collaborate with committee members to establish, implement, effectively maintain and continually improve Energy Management System (EnMS)
• Coordinate and guide the Energy committee on technical discussion in meeting
• Assist the Energy committee in developing measurement plans, identifying potential efficiency improvement projects, establishing criteria and method to ensure operation and control of the EnMS are effective
• Ensure action plans to continually improve energy performance is implemented
• Report performance of EnMS and energy efficiency performance to top management or management representative at determined intervals
• Perform the role as a Waste Disposal Coordinator in advising executives on the design of work and manufacturing processes to avoid waste and specifying rules on the separation and labelling of waste, including collection, delivery, storage, and in-company transportation.
• Promote the participation and consultation of workers to support Energy and Environmental related programs and awareness campaign
• Ensure conformance to EnMS, Wastes Management, and LEV requirements and compliance to local regulations
• Assume responsibilities as per Energy Efficiency and Conservation Act (EECA) 2024
• Ensure Energy, Wastes and LEV related documentation is accessible and well maintained
• Involve in ISO 9001, ISO 14001, TS16949, ISO50001 and other audits inclusive of government and customer audits. Ensure all OPL’s related to this audit is closed on a timely manner.
• To work closely with Site Safety Officer (HSE) and DH in ensuring safe work practice is always practiced in Bosch.
• Participate and contribute in Cluster Service Team (CST) and Regional Service Team (RST) activities.
• Responsible to propose and conduct continuous improvement plan for job scope related system
• Responsible to work closely with respective departments to resolve all FCM Energy and Environment related issues. Support and work towards achieving the departmental goal.
• To attended and complete to any other duties assigned by the immediate Superior

• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:-
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure log, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.
• Assist Manufacturing in troubleshooting manufacturing related problems.
• Provide post-production support.

• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:-
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure log, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.
• Assist Manufacturing in troubleshooting manufacturing related problems.
• Provide post-production support.

• Responsible for new product quality requirement, PQE function.
• Ensure products manufactured meet Customer requirements. 
• Responsible for Line process control and complaint management. Follow rule : 1-2-14 1.4.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving sheet PSS/8D.
• Responsible for inspection plan for incoming and outgoing (FQ, VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities without delay.
• Monitor, report of KPI’s in timely manner and establish action plan.

New Product Introduction

• Responsibility for –Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing, etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in UX, QG, FMEA, PQP and production line release. Ensure all the QG open point closed within defined due date or latest 3 months after SOP.
• Prepare product test plan, product inspection plan (EP), QZ test plan (QZTI) and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market, at least monthly reporting is expected.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented. Follow rule of PSS/8D 1-2-14.
• Responsible for part release.
• Ensure all ISIR requirements are fulfill before ISIR released i.e. Cpk > 1.33, PQA sign off, control plan and released critical components supplier qualification process.
• To ensure measurement methodology alignment between PgP2 and supplier during technical discussion with supplier via PQA.
• To ensure all related fixture including incoming inspection, short endurance for VQ/FQ audit, practical tests are ready 2 weeks before pilot.

Operation Support

• Responsible for in process & outgoing product quality performance.
• Responsible for MSA, calibration, concession management, customer complaint management, etc.
• Provide assistance to resolve line FOR issues.
• Support PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving activities and approve alteration change.
• Regular review with production personnel for PQP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target. Target to roll out improvement actions within 3 months after solution is defined.
• Ensure ANDI/CR contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances. Expected monthly audit reporting is needed to submit to supervisor and include action plan of manufacturing.
• Conduct Failure Investigation with cross-functional team eg. ENG, PUQ, MSE for non conformance incidents if needed.
• Drive cross functional team for Quality process improvement (e.g. Elimination of inspection, warranty limit).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Product CIP, Process CIP, warranty analysis reporting.

1. Planning of assembly processes flow considering manufacturing efficiency. Collaborate
with project team to seek and strive for minimizing product cost through design and
process optimization.
2. Support in the RFQ calculation; calculate and provide investment needed for standard
assembly process modules.
3. Define equipment specification in accordance to product specification. Plan, purchase
(with supervision), setup and release manufacturing cells on time, at budget and with
desired requirement.
4. Involve in each project stages to evaluate equipment and process performance.
Formulate technical and/or performance reports by collecting, analyzing and
summarizing information and trends.
5. Identify and establish process specifications, maintenance strategies and other
manufacturing documents required for line release activity.
6. Conduct problem solving methodology in assembly processes and equipment. In
meantime also developing troubleshooting guide and training of technical know-how to
technician.
7. Actively participate in system CIP on value disposition as in S-Q-C-D (Safety, Quality,
Cost & Delivery).
8. Provide effective countermeasure in technical flaw encompassed with corrective and
preventive action plan.
9. Study, evaluate and improve the technical capacity and capability in assembly
processes accorded to customer’s demand.
10. Continuously strive for higher and sustainable OEE, FPY, MTTR, MTBF.
11. Emphasize the intensity of team work culture in VSO (Value Stream Organization)
moving towards operational excellence.
12. Any other duties assigned by immediate superior from time to time.

• As a subject matter expert, you will consistently work to improve our suppliers' performance and the quality of our products.
• Supplier Auditing: Own the auditing process across all supplier management phases, including potential analysis, Cooperate Social Responsibility audits, initial sample process audits and comprehensive process audits.
• Supplier Development: Lead and support supplier quality and cost improvement activities. Conduct workshops, trainings, and regular follow-up visits to enhance supplier capabilities and performance in line with Bosch's requirements.
• Problem Solving: Intervene in critical supplier quality issues. You will take the lead onsite when our global plants require local support or when progress is stalled. Your role is to expertly coach the suppliers to master and apply structured problem-solving tools (e.g., 8D, 5-Why, Ishikawa) to ensure root causes are identified and holistically eliminated.
• Supplier Escalation Management: Manage supplier escalations that require higher management involvement, including the implementation and execution of dedicated quality measures, through to successful de-escalation.

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide postproduction and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:-
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure log, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.
• Assist Manufacturing in troubleshooting manufacturing related problems.
• Provide post-production support.

• To formulate maintenance plan for new equipment and machines based on inputs from station owners and suppliers.
• Perform troubleshooting based on troubleshooting guide from station owners and study on eliminating the problem from repeating.
• Liaise with station owners and machine suppliers on continuous improvement.
• To train, coach and develop technicians to handle test stations effectively in the area of troubleshooting and sustaining.
• To manage and ensure all manufacturing documents related to maintenance are being prepared and uploaded accordingly and promptly before release for manufacturing operations.
• To optimize and improve equipment reliability and design.
• To execute related activities to meet key performance indicators of department goals and drive for continuous improvement with realistic goal setting together with the team.
• To evaluate Test Technicians performance according to department and individual goals
• To summarize breakdown report and feedback to line support team for improvement (MTTR and MTBF).
• To execute any other related duties assigned by immediate superior from time to time.

Job Summary
1. Role
1.1 Q-Support to PPU in Production Part Approval Process (PPAP) and Preventive Quality Planning (PQP) as part of TTM process.
1.2 Main interface of rBU all supplier quality related issues after SOP (e.g. ECR, 8D, concessions, defect cost reimbursement, and etc).
1.3 First escalation level for the Plant for purchased parts quality issues.
1.4 Support achievement of Cost targets for related Product Group along the entire Product Life Cycle.

2. Job Scope
2.1 Purchasing Quality responsibility and accountability for the responsible Product Group within the rBU along the product life cycle.
2.2 PQP (Preventive Quality Planning) for purchased parts; Operative handling of initial samples / ISIR release.
2.3 Complaint management.
2.4 Blocked stock handling & Concession handling.
2.5 Represent Purchasing in Plant Point-CIP activities.
2.6 Measure supplier Quality Performance: Plant / rBU specific KPIs.
2.7 Operative handling of quality cost reimbursement.
2.8 Trigger escalation of supplier (as input of Q-escalation process).
2.9 Support all the relevant quality projects in rBU project team.
2.10 RPP / Tooling (incl. tooling transfer): Tech. Discussion, measurement harmonization, Process audit, Test & qualification-check, Product Certifications.
 

• Responsible in SMT paste printing and glue process to develop, optimize processes for new product introduction/ development and sustaining product engineering activities based on proper studies (e.g. Design of Experiment, risk assessment, equipment & process capability).
• Generate and maintain the standardized work documents.
• Ensure that the respective area workstation and system are well maintained in operation condition.
• Define equipment preventive maintenance plan in close collaboration with maintenance team. Provide training on machine maintenance, operation and processes when necessary.
• To assist in major machine breakdown troubleshooting.
• To participate in new product development discussion and contributes ideas and comments for PCB assembly and process technology.
• To participate, setup and review traceability for respective area and improve timely.
• To be the Data Owner of the processes under care and set-up of a proper Data Management for Data Visualization and Analytics.
• Responsible for process & yield improvement, cost reduction and cycle time reduction. Apply statistical method, systematically problem-solving tools (e.g. fault tree analysis, 3x5xwhy, DOE, 6- Sigma, Kepner Tregoe) or management tool (e.g. System CIP) to get desired results.
• To work closely with CoC (Centre of Competence) team to comply, standardize and improve processes via PFMEA and VVts/DMDs.
• Conduct equipment capability studies and evaluate processes. If needed, prepare ROI analysis and arrange supporting purchases.
• To achieve the department goal through continuous process improvement activities.
• Provide support in process and line audits, technical advice request from project team.
• Product engineer for the model assigned
• Any other assigned by immediate supervisor from time to time.

Test Planning & Execution

• Plan, coordinate, and execute testing activities according to approved test plans and procedures.
• Ensure testing is conducted accurately, consistently, and in compliance with defined standards.
• Monitor test progress and ensure timely completion of testing activities.
• Review test results with Product Quality Engineers and approve test reports in accordance with quality requirements.
• Support root cause analysis and follow up on corrective actions until closure.

Test Lab Management & Operations

• Responsible for overall test laboratory operations including capacity planning and workload balancing.
• Ensure optimal utilization of test equipment, materials, and resources.
• Manage inventory control for testing materials and consumables.

Equipment Maintenance & 7S

• Ensure all testing equipment is properly maintained in good working condition.
• Maintain safe and organized lab environment.

Training & Competency Development

• Ensure all test technicians and workers are properly trained before performing any testing activities.

Knowledge and Exposure

• Data analysis and reliability testing
• Failure analysis and problem-solving methodology
• Good in 7S.

Behavioral Competencies

• Drive achievement and excellence.
• Independent, initiative and proactive.
• Able to work with peers and functional team.
• Able to lead and guide a group of technicians.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.
4. To support line for trouble shooting in test system.
5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

1. Ensure Maintenance Key Performance Indicators (KPIs) — including MTBF, MTTR and MWT — for production lines consistently meet or exceed set targets.
2. Execute all relevant activities to achieve departmental KPIs (S,Q,D,C), while driving continuous improvement through realistic goal setting in collaboration with the team.
3. Lead or support root cause analysis using structured methodologies such as Fishbone Diagram, Why- Why, Is/Is not analysis.
4. Ensure all maintenance-related content and documentation reflect the most current data and insights to support informed decision-making and continuous process optimization (PDCA, SPL, OCAP, PSS.PFMEA,CP)
5. Actively participate in Value Stream Daily Leadership Review (DLR) and MyKATA sessions to align with operational priorities and drive engagement.
6. Contribute meaningfully to Value Stream Continuous Improvement Projects (CIP) on a quarterly basis, supporting long-term performance enhancements.
7. Perform troubleshooting and repair of for equipment related issues involving mechanical, electrical and PLC automation systems
8. Collaborate closely with process owners and other stakeholders to resolve quality issues, technical issues and implement improvement initiatives effectively.
9. Train, coach, and develop technician technical know-how to independently and effectively handle assembly station troubleshooting and sustainment activities.
10. New project early involvement to evaluate equipment performance and TPM readiness with technical analysis for rational decision justification. Manage and ensure timely preparation and uploading of all maintenance-related manufacturing documents prior to operational release.
11. Participate actively in TEF departmental initiatives such as Lean After Lean, Digitalization and Automation Projects, and BPS-TPM activities.
12. Carry out any other duties as assigned by the immediate superior, ensuring flexibility and commitment to team and organizational goals.

Key Responsibilities

• Act as Plant Product Owner for assigned product families from manufacturing stage through end-of-life (EOL).
• Serve as the main interface between Plant and Development for all product-related HW/SW issues.
• Drive First Pass Yield (FPY) performance and implement continuous improvement actions to meet targets.
• Lead root cause analysis and problem-solving activities for production and quality issues (e.g., FOR, field returns, 0km defects).
• Take ownership as Task Force Leader for critical product or process issues, coordinating cross-functional resources.
• Support failure analysis (FA) activities and collaborate with teams to define effective diagnostic tools.
• Transfer product know-how from development to plant during industrialization and ensure smooth product ramp-up.
• Participate in new product development (NPD) phases to incorporate plant lessons learned and prevent recurring issues.
• Provide technical risk assessments and decision justification for quality-related concerns.
• Lead and support cost improvement initiatives (e.g., RPP, IDC) to achieve plant and corporate targets.
• Develop and implement engineering and automation solutions to improve efficiency and reduce scrap.
• Ensure manufacturing readiness through line buy-off, release, and validation activities.
• Conduct technical training for production technicians and engineers.
• Collaborate with internal teams, contract manufacturers (CM), and stakeholders to achieve operational goals.
• Support data analysis and reporting (e.g., SQL queries, technical presentations) for management and customers.
• Provide support in sample builds, testing, and evaluation activities during early product phases.
• Perform additional duties as assigned by management.

• Lead and develop a team of technicians and engineers to achieve key maintenance, quality, and equipment performance goals, ensuring strong readiness and reliability of assets for ongoing and future operations.
   
• Drive the implementation and continuous improvement of TPM pillars, including maintenance KPI (OEE,MTBF,MTTR, tDt), preventive maintenance, autonomous maintenance, and focused improvement to strengthen equipment uptime and stability.
   
• Champion maintenance excellence by coordinating effective planning of maintenance activities, optimizing resource utilization according to company policy, RBA and local labor legal requirement, overseeing equipment condition monitoring, and conducting risk assessments for equipment reliability.
   
• Provide mentorship, coaching, and structured training to build technicians’ technical capability, career growth, and motivation toward achieving departmental objectives.
   
• Instill systematic problem-solving culture, applying root-cause analysis and problem solving tools, LEAN concepts, and reliability-based approaches to eliminate chronic losses.
   
• Foster an inclusive, collaborative, and high-performance team environment that encourages ideas, cross-functional cooperation, and continuous professional development.
   
• Establish, review, and refine maintenance standards, equipment specifications, and long-term toolings care strategies to ensure sustainable performance.
   
• Assist in the planning, formulation, and monitoring of MOC and TPM budgets, ensuring spending compliance with operational priorities.
   
• Promote strong teamwork culture aligned with VS principles, strengthening synergy between operational teams and functional excellence.
   
• Identify and drive initiatives that enhance technical competency, TPM proficiency, and subject-matter expertise among technicians and maintenance personnel.
   
• Ensure full compliance with regulatory, safety, health, and environmental requirements, promoting safe work practices and strong TPM discipline.
   
• Undertake any other tasks or responsibilities assigned by the immediate superior

Job Summary
Role
1.1 MT Product Purchasing Buyer for related MT Product Group(s) in PgP2 along the complete Product Life Cycle (incl. product relocation).
1.2 MT Purchasing Strategy-, Quality- and Target Cost responsibility and accountability for MT Product Groups in PgP2.
1.3 MT contact interface to Material Field purchasing (Commercial, Quality). Assure aligned messages for the related Product Group from MT to the Material Field Purchasing.
1.4 Escalation in the MT-Pg for Purchasing related issues (commercial, quality, logistics).
1.5 Prepare aligned MT-Pg Product Group Purchasing Strategy for PT-MT/PPU

Job Scope
2.1 Definition & Maintenance of a Product Group Purchasing Strategy considering TTM and Value Stream targets of MT-PgP.
2.2 Product Group interface from Purchasing to MT.
2.3 Leading and responsible for the RPP activities in the respective Product Group (creation, implementation, cooperation cross-functionally) at PgP location.
2.4 Early Supplier involvement in PIF to support Product Innovation and Target Cost Achievement (PILUM).
2.5 Support Annual Price Negotiation by providing new potential business opportunities of Product. Group in pipe-line.
2.6 Challenge and support Material Field buyers to achieve Best Material Field Costs
2.7 Support Material Field Buyers for contracting (e.g. SE-contracts, NDA, Concept Competition etc.)
2.8 Create transparency of costs of Product Group by benchmarking (support the Global Product Champion).
2.9 Responsible for achievement of Best Costs in Product Group (Benchmarking, TCO, RPP) before / after SOP.
2.10 Responsible for Product Group related quality activities (e.g. ISIR, 8D, PQA, etc.)
2.11 First escalation level for Quality and Logistics related supplier issues from Plant.
2.12 Takes care of purchasing related topics/tasks in the Value Stream.
2.13 Ad-hoc tasks as assigned from time to time.
 

To work on the following tasks with guidance:
1. To setup derivative test system for product lines based on test specification (PAV) provided by CoC team
accordingly to following requirement:
a. To track project budget and ensure equipment cost within the planed budget.
b. On time delivery of test systems to the production line according to project milestone (include
manage of equipment, hardware interface and mechanical jig and fixture purchase)
c. Release the test system according to Test System Release Procedure.
d. To train and coach maintenance team to be able to handle test system breakdown more
effectively and maintain test system in achieving FOR (NTF related FOR) and OEE target.
(eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System
Setup guideline and test fixture and job design concept)

2. To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by CoC team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:
• To participate in FOR daily meeting, project meeting to monitor daily operation issue test related.
• To upgrade software to the latest DUT software released by ENG.
• To analysis MIS data and coordinate improvement activities on test time reduction and machine
efficiency.
• Early involved in new model concept discussion with CoC and TEF7, to ensure smooth handling
from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide postproduction and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

Job Summary

• Responsible for new product quality requirement.
• Ensure products manufactured meet product & process quality requirements.
• Customer complaint resolution and product warranty improvement.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving process PSS/8D.
• Generate and maintain inspection plan for in-process (EQ, FQ) and outgoing (VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Monitor, report of KPI’s in timely manner and establish action plan.
• Any other tasks or responsibilities assigned by superior.

Job Scope

New Product Introduction

• Responsibility for – Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing (QZ), etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in FEP, QG, FMEA, CP and production line release.
• Prepare product test plan, product inspection plan (EP), QZ test plan and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented.
• Responsible for part release and incoming inspection plan.
• Ensure all ISIR requirements are fulfill before ISIR released e.g. S,F,L, and Cpk > 1.33, etc.
• To ensure measurement methodology alignment between PgP2 and supplier.
• To ensure all related fixture including short endurance for VQ/FQ audit, practical test are ready before pilot.  
• Lead Q-VSM process and ensure fulfillment during pilot stage.

Operation Support / Value Stream Quality

• Responsible for product & process quality in Value Stream, support VSM on product & process quality performance.
• Responsible for quality management in process changes, sorting & rework flow buyoff, concession management, customer complaint management, etc in the Value Stream.
• Responsible for quality management of ALR, product relocation, plant to plant activities, new line/equipment, machine/process parameters/software buyoff, etc.
• Support & drive PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving, 2nd / alternatives source activities and approve alteration change.
• Regular review with production personnel for CP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target.
• Ensure ANDI contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances.
• Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Drive cross functional team for Quality process improvement (e.g. Q VSM, functional test quality gates, MES quality data analysis, etc).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Quality meeting, warranty analysis reporting.

Job Summary

• Responsible for Battery testing (qualification, sample, reliability), documentation, problem resolution and failure analysis.
• Ensure released Battery is fulfilling the internal standards, external product safety and country specific requirements.  
• Perform failure analysis on failed Battery from qualification, testing, QZ, warranty and customer complaints. Drive for problem solving and improvement implementations.
• Review & monitor the effectiveness of the Battery test plans and implement improvements where necessary. Perform & ensure test method alignment between test labs.
• Responsible on the accuracy and competency of test reports generated.
• Support component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Manage and improve software quality processes, including requirement analysis, test case design, and defect tracking.
• Maintain and optimize test documentation in tools like CodeBeamer or SharePoint.
• Establish initial software testing strategy and its quality assurance methodologies, prepare training information package and provide training to quality engineers.

Job Scope

• Testing and qualification: Responsible for conducting testing and qualification of Batteries. Ensure meeting committed date to customer with accurate report.
• Develop, review and monitor the effectiveness of the Battery test plans and implement improvements where necessary. Develop test fixture / adaptor and plan equipment for better testing efficiency.
• Establish work instructions for all equipment and testers, with regular review to ensure validity. Train test technicians and ensure their competencies in performing testing.
• Work with project teams to realize the Battery testing schedule / life cycle.
• Responsible for failure analysis and postmortem on defects by using appropriate tools methodology e.g. 5 Why’s, RCA, FTA. Drive for improvements implementation.
• Provide advice on applicable test method to address root-cause of failure and improvement opportunities.
• Conduct regular and quarter review on defect trend for Battery failures for quality management. Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Perform failure analysis on failed parts (inclusive customer and warranty complaints) and support improvement to achieve the agreed target.
• Conduct periodic audits on lab for lab compliances on functions and safety. Adhere 7S practice.
• Software Quality Assurance, requirement management, documentation & compliance
• Define and implement quality standards for embedded software and related applications in power tools.
• Develop and maintain test strategies, test plans, and test cases for software components, ensuring compliance with functional and safety requirements.
• Analyze software requirements for completeness and testability.
• Manage and track defects using tools like CodeBeamer, ensuring timely resolution and proper documentation.
• Continuously improve QA processes, maintain comprehensive documentation in Share Point for test processes, results, and quality metrics.
• Work closely with development, hardware, and system teams to ensure software quality aligns with product performance and safety standards.
• Any other matters as assigned by Superior to meet the target and deadline.

Job Summary:

Core tasks
• Responsible and leading related Purchasing related activities in Product Innovation Framework [PIF]; ensuring Time To Market [TTM]
• Support and executing related Purchasing Strategy, Quality and Target Cost responsibility and accountability for the related PDP process to ensure TTM
• Take charge as one of main contact interface to PIF team (Commercial, Supplier Quality) / Assure aligned decision between PIF and excellent team and Material Field Purchasing
• Prepare aligned responsibility in Sourcing Strategy for each responsible product in PIF
• Coordinate Cross Regional Cost Reduction Projects

Job Scope: Responsibilities & Authority
• Definition & Maintenance of a Product Group Purchasing Strategy considering TTM
• As main contact personnel for related Product Group interface among PIF team – Value Stream-Global Purchasing to Business Unit
• Coordinate cross regional RPP activities in the respective new Product (responsibility in creation, implementation, cooperation cross-functionally)
• Early Supplier involvement in TTM to support Product Innovation and Target Cost Achievement (PILUM,
GENESIS, TOMAS)
• Support Annual Price Negotiation by providing new potential business opportunities of Product Group in pipe-line
• Challenge and support Material Field buyers to achieve Target Costing
• Support Material Field Buyers for contracting (e.g. SE-contracts, NDA, Concept Competition etc.)
• Create transparency of costs of Product Group by benchmarking (support the Global Product Champion)
• Responsible for achievement of Best Costs in Product Group (Benchmarking, TCO, RPP) before/after SOP
• Responsible for Product Group related quality activities & target achievement (e.g. ISIR, 8D, VQS, etc.)
• Takes proactive action & care of purchasing related topics/tasks in PIF
• Will be taking charge of plastic and other mechanical commodities.

Cooperation by:
▪ rBU cross functions Excellence Team; Material Field purchasing; Execution Team