Total 4,431 job vacancies in Malaysia

Please note that this is not an exhaustive list of everything that needs to be done.  Employees at Anantara always find new ways to look after the business, their guests and associates. Within this, the key responsibilities for this position are:

• Clearly understand the concept of guest services centre being the one point of contact for guests.
• Ensure adherence to duty roster and is punctual. 
• Ensure that that work areas, PABX are properly maintained and cleaned.
• Is updated of VIP/RSVP etc. and repeat guest list.
• Perform duties of guest services when necessary.
• Maintain order in guest service center area and provides communications facilities in case of emergency, during emergencies handles all communications until ordered to leave the premises by a superior except in case of imminent personnel danger.
• Is aware of all the characteristics of the resort, the names, positions and responsibilities of each division head and department head, the extension numbers and the use, location of equipment.
• Ensure that traffic sheet for telephone / fax are correct before sending to the accounting dept.
• Ensure immediate transmission of invoices to the cashiers / front desk.
• Has complete knowledge of the resort and services, including villa types, rates, relative features and facilities, food and beverage outlets and promotions, spa and health club, and other properties. (especially the competition)
• Ensures that all guest requests are channelled correctly and followed upon effectively.
• Conduct courtesy calls to in-house guests to ensure follow up on requests.
• Is able to route all incoming calls quickly and efficiently without keeping the caller waiting.
• Complete all other shift duties as outlined on shift checklist.
• Assist in all the other areas of Front office as and when necessary, especially all Guest Service Centre Agents are responsible to assist CID data related task during the absence of CID Agent.
• Handling all CID related messages, information as a link between the resort and CID police department, monitoring and correcting discrepancy between two parties.
• Follow procedure of shift handover between colleagues with regards to day to day operation.
• Ensure that all checked in rooms/check out rooms are also checked in/out CID police report system.
• Update promptly and correctly all guest data in CID online system
• Is proactive and innovative, suggesting alternatives that meet guest needs in enjoying their Anantara experience.
• Maintain knowledge and abiding by all Company Policies in relation to Front Office e.g. Refunds and Cancellations and ensuring they are correctly communicated to guests if required.
• Develop and maintain a close and harmonious working relationship with all hotel departments.
• Participate in training programs for the Front Office Department as scheduled.
• Possesses a positive upbeat personality with a desire to deliver outstanding customer service to our guests. Is detail oriented.
• Ensure that all correspondence are processed within the set times and handled correctly according to the procedures.
• Report and maintain accurate records with documents on incidents occurring at the resort and keeps superior briefed at all times.

About the role 

At SEEK, we’re creating technology that helps people live more fulfilling working lives. As a Level 3 Software Engineer, you’ll design, build, and maintain web applications used by millions. You’ll work closely with designers, product managers, and engineers to deliver high-quality, scalable solutions that enhance SEEK’s platforms.

Reporting to a Senior Engineering Manager, you’ll be part of a collaborative squad that values innovation, learning, and craftsmanship. You will shape technical designs, write clean and efficient code, and mentor team members while driving improvements in SEEK’s engineering practices. Success means delivering impactful features, strengthening performance, and contributing to SEEK’s mission of connecting people with work.

What you will do 

• Build and maintain high-performing front‑end and back‑end applications
• Collaborate with cross‑functional teams to design and refine technical solutions
• Contribute to architecture decisions and technical direction
• Uphold quality through testing, reviews, and documentation
• Enhance developer workflows and CI/CD practices
• Share knowledge and mentor peers in engineering best practices
• Support system reliability and continuous improvement initiatives

In Supply Chain Operations we lead, plan, and execute the supply of IKEA products between suppliers and retailers. We do this by 1) leading tactical and operational planning; 2) securing optimal replenishment; 3) sourcing and developing transport and logistics capacities; and 4) managing and execution of goods flow.

We are looking for suitable candidates for the role of Technical Manager, based at the IKEA Distribution Center in Port Klang, Malaysia.

As a Technical Manager in our Distribution Port Klang, you lead across all technical disciplines in the DC, orchestrating building infrastructure, automation systems, digital/IT topics and contractor relationships to create an integrated approach to DC reliability. This role balances long-term planning with operational excellence to ensure all systems work harmoniously to support operations.

Your key assignments are:

• Lead and develop all technical teams (maintenance, automation, IT and facility)
• Ensure the building and ASRS (Automated Storage & Retrieval System) are in optimal condition at all times.
• Establish team action plan, budgets, and performance metrics
• Align maintenance activities and facility improvements with business requirements, developing yearly Facility & Maintenance Plan.
• Oversee critical equipment lifecycle planning and technology upgrade initiatives
• Review and approve contractor agreements and secure implementation at agreed service level.
• Develop emergency response protocols and business continuity plans
• Report key performance indicators to Distribution Unit Manager
• Drive continuous improvement and cost optimization across all technical areas, including automation (ASRS) and technical innovation.
• Collaborate with operations leadership on capacity planning and future needs

Job description

The data analyst will play a key role in defining, creating, and delivering powerful interactions data for a substantial part of our business and will partner closely with multiple business partners to provide data and insights to drive operational improvements. This is a critical role that will enable and support our global data and business intelligence strategy. The data analyst will be able to embrace and drive change and to lead global cross-functional data-related projects as well as being data savvy, technically minded and capable of quickly gaining a deep knowledge and understanding of Experian’s wide-ranging systems landscape as well as continually evolving complex data hierarchies, reporting structures and business intelligence requirements and priorities.

Job Summary:
The Sputter Process Technician is responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform process characterization for sputter equipment and materials.
• Conduct buy-off by verifying key process input variables (KPIV), including pressure, temperature, and voltage.
• Perform measurements and data collection for characterization samples.
• Monitor key process output variables (KPOV) during production to ensure process stability and product quality.
• Perform process adjustments as needed to maintain specifications and resolve deviations.
• Assist in troubleshooting process and equipment issues to minimize downtime.
• Maintain accurate records of process parameters, test results, and adjustments.
• Adhere to safety guidelines and cleanroom protocols at all times.

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Provide Technical training and certification for junior technician.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Provide Technical training and certification for junior technician.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Provide Technical training and certification for junior technician.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Provide Technical training and certification for junior technician.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Provide Technical training and certification for junior technician.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.

The position requires the candidate to operate laboratory analytical equipment, perform detailed analysis of samples and data, report out findings to stakeholders, and conduct routine equipment maintenance.  

Key Responsibilities

• Operate various analytical equipment according to established protocols and procedures.  
• Perform comprehensive analysis of samples
• Report out analytical results and findings 
• Conduct routine equipment maintenance and troubleshooting
• Prepare samples for analysis using appropriate techniques
• Record and analyze test results with accuracy and attention to detail
• Maintain laboratory cleanliness and housekeeping
• Follow all safety protocols

We are looking for suitable candidates for the role of Supply Operations Developer, based at the IKEA Distribution Center in Port Klang, Malaysia. 

The purpose of the job is to secure excellence in total Supply Chain operational performance, and its further development, in close cooperation and alignment with all relevant supply chain stakeholders; contributing to reaching customer perceived availability at the lowest total cost (considering impacts of quality, safety, service performance, sustainability and other supply chain costs securing optimal replenishment solution). 

• Logistical ("flow") performance: Secure logistical operational performance from end-to-end perspective as it is defined by respective set of KPIs/PIs (e.g. OTD, EQU, loading times); within given geographical scope. Follow-up and implement actions within existing and new delivery solutions. 
• Stakeholder management: Align with supply chain stakeholders to secure logistical operational performance, as well as create preconditions for smooth and efficient Supply Operations. Act on deviations to the plan (e.g. prioritization and cancellation of orders) together with our partners and secure the communication flow. 
• New optimized replenishment solutions: Lead their implementation (e.g. new routes) in alignment with relevant stakeholders and in close cooperation with Service Provider Operations Developers. Follow-up and adjust Lead Times based on OTD performance. 
• Constraints and limitations: Identify & define constraints together with internal stakeholders (e.g. loading plan at supplier) to secure preconditions for efficient supply operations and, in general, wished level of logistical performance throughout the year. Follow-up on the compliance of our stakeholders and secure the execution of market-relevant plans (e.g. local activities) in connection with the MOF. 
• Continuous Improvements: Validate and optimize sending and receiving capabilities (e.g. Slot Management) as a link between all supply chain stakeholders. Change, maintain and continuously improve replenishment solutions. Act upon fluctuations to avoid performance disruptions and increased total cost. Propose new logistical set-up to support logistics cost development. Identifies and proposes volume consolidation opportunities and mid-receiver needs. Collaborate with Category Area Teams; support logistic development in new sourcing countries. 
• Deviation Handling: Contribute to the Market Operational Forums, support in constraint situations and ERPs in case of corrective actions need. Secure the right information on constraints and availability impact to our supply chain stakeholders. 
• Development: Support the development of internal working methods and deviation the operational requirements and secure they are captured in the right documentation (e.g. Delivery Handbook). 

ABOUT US

As Southeast Asia’s #1 integrated logistics provider, Teleport is all about making logistics fast, affordable and reliable. 

Our mission? To move things across Southeast Asia better than anyone else. We’re focused on making next-day delivery a reality for all.

#TeamTeleport is guided by our values: Move with urgency — because time is crucial; Aim to pioneer — constantly innovating to stay ahead; Do it with intent — delivering with purpose and precision; and Keep it real — maintaining authenticity and transparency in all we do.

Learn more about Teleport here: https://www.teleport.it/ 

We are looking for an Intern, reporting to the Head, Financial Planning & Analysis based in Wisma Tune, Kuala Lumpur.

A DAY IN A LIFE

At Teleport, we’re building toward IPO — and that means doing the boring things well. Execution, discipline, and follow-through matter as much as big ideas.

Your day will be varied, often crossing functions, but most of your time will focus on delivering results, owning your scope end-to-end, making fast, data-informed decisions, and following through on fundamentals like reporting, documentation, and processes.

How we work matters as much as what we achieve. Doing the basics right, every time, sets us up for success. 

Most of your time will be spent driving impact through:

• Assist in the preparation monthly management and financial reports for management and external stakeholders on a timely and accurate basis
• Assist in the preparation of yearly budgets for the Group
• Assist in analysing monthly budgets vs actuals
• Assist in preparation on monthly forecasts for the Group
• Assist in analysing monthly forecast vs actuals
• Assist in analysing trends, benchmarks and in-depth market research applicable to our business lines
• Asisst in analysing financial reconciliation data, identify gaps and recommend areas for improvement

These are minimum-requirement skills and a ‘must-have’ for the role:

• Currently pursuing a degree in Finance, Accounting, Economics, or related field.
• Strong Excel skills, including VLOOKUP, Pivot Tables, and basic formulas.
• Comfortable preparing presentations and reports using PowerPoint.
• Eager to learn and take initiative.
• Strong communication skills.
• Able to work well in a team and handle multiple tasks.

At Teleport, we’re all about creating a diverse and inclusive team where everyone feels valued. We believe that different perspectives make us stronger and help us do logistics better across Southeast Asia. We welcome people from all walks of life and celebrate what makes each of us unique. If you’re passionate about making a difference, we’d love to hear from you!

We are seeking a detail-oriented and efficient Technician, FA to join our team in PN Bayan Lepas Penang Malaysia. 

Job Summary

A Technician supports the Failure Analysis team by executing hands‑on Defect analysis, sample preparation, FA laboratory equipment operation and data collection to identify failure modes in Disk and head. The role focuses on equipment operation, lab processes, and documentation, working under guidance of FA Engineers.

Failure Analysis Support Assist FA engineers in failure analysis investigations for:
In‑line failures Reliability test failures Customer / field returns.
Perform basic electrical and physical failure analysis following standard operating procedures (SOPs).

Key Responsibilities:

Failure Analysis Support

• Assist FA engineers in failure analysis investigations for:
  • In‑line failures
  • Reliability test failures
  • Customer / field returns
• Perform basic electrical and physical failure analysis following standard operating procedures (SOPs).

Sample Preparation & Handling

• Prepare samples for analysis, including:
  • Labeling/marking
  • Disk Orientation & Location
• Track and manage samples throughout FA workflow.
• Equipment Operation and maintain FA laboratory equipment such as:
  • Optical microscopes
  • AFM, Zygo & OSA  (under supervision/training)
  • Perform daily equipment checks and basic troubleshooting.
• Capture and organize:
  • Optical images
  • Measurement data
  • Test results and observations
• Maintain accurate and detailed FA records in databases or logbooks.
• Support FA engineers in report preparation.

Job Summary

• Responsible for Battery testing (qualification, sample, reliability), documentation, problem resolution and failure analysis.
• Ensure released Battery is fulfilling the internal standards, external product safety and country specific requirements.  
• Perform failure analysis on failed Battery from qualification, testing, QZ, warranty and customer complaints. Drive for problem solving and improvement implementations.
• Review & monitor the effectiveness of the Battery test plans and implement improvements where necessary. Perform & ensure test method alignment between test labs.
• Responsible on the accuracy and competency of test reports generated.
• Support component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Manage and improve software quality processes, including requirement analysis, test case design, and defect tracking.
• Maintain and optimize test documentation in tools like CodeBeamer or SharePoint.
• Establish initial software testing strategy and its quality assurance methodologies, prepare training information package and provide training to quality engineers.

Job Scope

• Testing and qualification: Responsible for conducting testing and qualification of Batteries. Ensure meeting committed date to customer with accurate report.
• Develop, review and monitor the effectiveness of the Battery test plans and implement improvements where necessary. Develop test fixture / adaptor and plan equipment for better testing efficiency.
• Establish work instructions for all equipment and testers, with regular review to ensure validity. Train test technicians and ensure their competencies in performing testing.
• Work with project teams to realize the Battery testing schedule / life cycle.
• Responsible for failure analysis and postmortem on defects by using appropriate tools methodology e.g. 5 Why’s, RCA, FTA. Drive for improvements implementation.
• Provide advice on applicable test method to address root-cause of failure and improvement opportunities.
• Conduct regular and quarter review on defect trend for Battery failures for quality management. Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Perform failure analysis on failed parts (inclusive customer and warranty complaints) and support improvement to achieve the agreed target.
• Conduct periodic audits on lab for lab compliances on functions and safety. Adhere 7S practice.
• Software Quality Assurance, requirement management, documentation & compliance
• Define and implement quality standards for embedded software and related applications in power tools.
• Develop and maintain test strategies, test plans, and test cases for software components, ensuring compliance with functional and safety requirements.
• Analyze software requirements for completeness and testability.
• Manage and track defects using tools like CodeBeamer, ensuring timely resolution and proper documentation.
• Continuously improve QA processes, maintain comprehensive documentation in Share Point for test processes, results, and quality metrics.
• Work closely with development, hardware, and system teams to ensure software quality aligns with product performance and safety standards.
• Any other matters as assigned by Superior to meet the target and deadline.

• Job Summary
  • To ensure smooth execution of back-end, post-sputter processes in compliance to process specification
  • To carry out engineering studies to improve post-sputter processes.
• Essential Duties & Responsibilities
  • To monitor daily process KPOV and KPIV
  • To trigger for process or machine maintenance as scheduled or on ad hoc basis
  • To ensure compliance to operating procedures and process parameters
  • To carry out evaluations for process improvement
  • To ensure quality of parts that leave the process and own up any excursions and action items to mitigate the impact and solve the issue.

We are actively driving advanced package technology and developing power package with focusing on next generation technologies for AI data center and automotive. To achieve the rapidly growing demand and expedite release to market of power packages, we are developing such as Power QFN, HSON, HSOT and TOLL. This role offers the opportunity to work on, higher density, lower resistance, higher reliability, and high thermal dissipation package design and develop technologies.

Key Responsibilities

• Design and develop power package and interconnect for Renesas’s packaging needs in the areas of power QFN, HSON, HSOT and TOLL for AI data center and Automotive.
• Work with OSAT/Internal manufacturing especially collaboration with Malaysia and Japan PKG team to develop, run DOE to optimize processes and establish process specification.
• Work with Product groups and QA team to define target of package structure/design, develop new package and processes, and qualify packages within required period.
• Ensure smooth transition into production by establishing robust design and process through the DOE results, verification, and resolving issuesduring development period.
• Develop and maintain technical expertise on advances and innovations in advanced power package design, process, and interconnect that linked and execute pkg roadmap. 

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Provide Technical training and certification for junior technician.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.

We are seeking a dynamic, driven and organized Executive Assistant (EA) to support the VP of Quality. 

In this role, you will be trusted to work with the highest level of confidentiality, understanding the needs of the Executives while carefully balancing relationship building across the business. You will need to be organized and innovative, while thriving in a fast-paced environment. You must have a can-do attitude, and be willing to pitch in and help others, to execute effectively and efficiently.

You will need to have strong attention to detail and ability to manage competing priorities. A strong written and verbal communication skills, and ability to maintain the utmost level of professionalism is required. The ability to take initiative and to work both independently and as part of a team is vital. Supporting Executives for a company spread across the globe, at times you will need to be flexible with working hours, and self-time management will be necessary.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Calendar Management: ensure the Executive’s time is well organized and used to best support the goals of the VP of Quality and the broader company.
• Meeting Planning and Organization: Support planning and organizing of internal and external meetings, team offsites, country visits, and other meetings.
• General Enquiries: Act as the source for enquiries and refer routine matters to appropriate parties.
• Tool Management: Manage expense reports, SOW’s and PO’s, and become savvy with WD’s internal tools such as M365, Co-Pilot etc.
• Briefing Documents: Manage briefing documents for key internal/external meetings and create briefing packets for business trips.
• Projects: Work on special projects, as needed.
• Travel: Manage Executive travel needs, including planning optimum travel arrangements
• Community: Build the necessary communities to further drive your own development, and to support your peers across the business.

ABOUT US

As Southeast Asia’s #1 integrated logistics provider, Teleport is all about making logistics fast, affordable and reliable. 

Our mission? To move things across Southeast Asia better than anyone else. We’re focused on making next-day delivery a reality for all.

#TeamTeleport is guided by our values: Move with urgency — because time is crucial; Aim to pioneer — constantly innovating to stay ahead; Do it with intent — delivering with purpose and precision; and Keep it real — maintaining authenticity and transparency in all we do.

Learn more about Teleport here: https://www.teleport.it/

A DAY IN A LIFE

At Teleport, we’re building toward IPO — and that means doing the boring things well. Execution, discipline, and follow-through matter as much as big ideas.

Your day will be varied, often crossing functions, but most of your time will focus on delivering results, owning your scope end-to-end, making fast, data-informed decisions, and following through on fundamentals like reporting, documentation, and processes.

How we work matters as much as what we achieve. Doing the basics right, every time, sets us up for success. 

These are minimum-requirement skills and a ‘must-have’ for the role:

• Assist in preparing RFQ/RFI documents and sending them to suppliers during sourcing or tender exercises.
• Perform price comparison and basic cost analysis to support supplier evaluation and sourcing decisions.
• Conduct supplier and market research to identify potential vendors and benchmark pricing.
• Support tender documentation and sourcing reports, including preparing summary slides and maintaining procurement records.
• Coordinate with internal stakeholders and suppliers to follow up on quotations, required documents, and sourcing information

At Teleport, we’re all about creating a diverse and inclusive team where everyone feels valued. We believe that different perspectives make us stronger and help us do logistics better across Southeast Asia. We welcome people from all walks of life and celebrate what makes each of us unique. If you’re passionate about making a difference, we’d love to hear from you!

The Data Processing Specialist is responsible for data coding and data input validation focusing on specific industry/category or set of categories (e.g., Beverages, Food, Health, and Beauty Products). As a Data Processing Specialist at NielsenIQ, you support the create and deliver client output deliveries in a correct and timely manner. This role is to support New Zealand market (CI). 

• Be the contact for commercial queries, leading the resolution in a client-focused and timely manner in cooperation with Client Liaison and Commercial teams. To be able to identify, investigate and coordinate the resolution of data, process, or product related queries
• Plan and execute a complex daily personal workload and support to meet departmental and company schedules
• Analyze and identify gaps and areas for improvement in coding, data input validation and client instructions environments (CIP - Consumer Information Platform) and drive the convergence of processes and tools
• Providing accurate and timely feedback to respective country teams, driving SOP and use of best-demonstrated practices
• Working across relevant Operations/Enablement teams to ensure delivery to client expectations and satisfaction
• Operate in a virtual/multi-cultural environment, liaising with stakeholders and colleagues

As Director of Revenue Management, you will set and effectively communicate the hotel pricing strategy by market segment with reference to market intelligence, buying patterns and pre-determined seasonality.

This position will lead the Revenue & Reservations functions for Anantara Desaru Coast Resort & Villas. This position will base in Revenue Management Centre of Excellence (RMCE) Minor Hotel Corporate Office in Bangkok, Thailand and reporting line will be to the Area General Manager - Malaysia.

You will further support and provide guidance for pricing in F&B, Spa and Other Revenue generating departments. Further you will actively participate in the production of the hotel’s annual budget for all revenue streams and assist in the creation, update and evaluation of the hotel sales and marketing plan. You will be responsible for ensuring available technology (PMS & RMS) is fully utilized and understood according to the property specific business mix and requirements and to ensure optimal use. You will then measure performance on all distribution channels, to ensure that fair market share is well achieved. Key areas of responsibility include:

• To prepare weekly accurate 3 months forecast for hotel rooms revenue by Market Segment.
• To prepare monthly accurate rolling 12 months forecast for hotel rooms revenue by Market Segment.
• To set and effectively communicate the hotel pricing strategy by market segment with reference to market intelligence, buying patterns and pre-determined seasonality, while supporting the other revenue departments for their pricing.
• To prepare and chair a weekly Revenue Meeting. Collate and distribute meeting minutes of notes on forecast and strategy changes, including weekly action plan.
• Set monthly targets of upselling revenue for front office and reservations department. 
• To provide innovate solutions and ideas for maximising the hotels total revenue management capablities.

Get to Know the Team

Tech Infra (TI) aims to Deliver Joy and Excellence to Grab engineers by enabling a frictionless ecosystem, allowing focus on value-adding features for users in a fast and safe manner. Some folks and companies would recognise this as a "Platform Engineering Team", and that is what we do.

Get to Know the Role

When you're an engineer at Grab, you are part of the heart and soul of the company. Our passion is anchored in the work that we do, and this is reflected in the impact we make on millions of lives on a daily basis. Grab Engineering is empowered by creating amazing services and tools that serve millions of passengers, driving partners, and fellow Grabbers.

You will report to our Software Engineering Manager, and you will based onsite in our Petaling Jaya office.

We seek independent thinkers who care for their product and own the problems we face day-to-day.

The Critical Tasks You Will Perform

• You will design and implement robust APIs and backend services using Python/Go.
• You will create responsive, user-friendly interfaces using JavaScript/TypeScript.
• You will mentor junior developers and conduct code reviews to foster growth.
• You will build scalable database architectures and optimize query performance.
• You will collaborate with product managers, designers, and stakeholders to deliver features effectively.
• You will lead feature development from conception to deployment, driving technical decision-making.
• You will participate in Agile development processes and contribute to technical documentation and knowledge sharing.

Context of the Mission:

Louis Dreyfus Company (LDC) is a global leader in the processing of agricultural products and the merchandising of a diverse range of commodities. Founded and based in Europe, LDC has a strong presence in North and South America, Europe, Asia, the Middle East, and Africa. To support the growing needs for corporate reporting and analysis, LDC is implementing a new back-office solution based on SAP S/4 under the program named BOLD – BackOffice Louis Dreyfus. This role offers the opportunity to develop skills related to LDC’s core financial business processes within the S/4 Hana solution and to play a pivotal role in our ambitious SAP program.

Mission:

As a Business Analyst, you will ensure the effective implementation of business processes in our back-office systems. You will be the end-to-end owner of one or several key IT solutions within Back-Office Services, aligning the delivery roadmap, innovation pipeline, and continuous improvement plan with business needs. You will ensure support structures and run KPIs are maintained, and you will collaborate closely with business process owners (BPOs) or functional heads to prioritize initiatives.

In addition to the responsibilities outlined above, the primary mission of the Business Analyst will be to oversee the deployment of the finance core model for rollout. This involves:

• Coordinating with various stakeholders to ensure the seamless integration of the finance core model into the countries’ operations.
• Managing the project timeline and resources to achieve the successful implementation of the finance core model within the specified deadlines.
• Ensuring compliance with local regulations and financial standards during the deployment process.
• Providing training and support to local teams to facilitate the adoption of the new finance core model.
• Monitoring and evaluating the performance of the finance core model post-deployment to ensure it meets business requirements and KPIs.

This role is critical to the success of the countries’ rollout and requires a high level of expertise in financial processes, project management, and stakeholder collaboration.

Key Responsibilities:

Solution Delivery & Management:

• Develop and manage the solution delivery, ensuring alignment with business needs.
• Conduct an animated workshop to provide detailed presentations, step-by-step guides, compliance training, hands-on sessions, and Q&A to ensure successful deployment and adoption of the finance core model.
• Ensure support structures and KPIs are maintained.
• Act as the primary point of contact for aligning solution priorities with BPOs and functional heads.

Governance & Strategy:

• Develop strategies, initiatives, and communication plans to maximize value, adoption, and satisfaction of the solution.
• Own the delivery and associated metrics (e.g., SLA).
• Manage enhancement requests and prioritize them in collaboration with business stakeholders.
• Handle support escalations at level 3 when necessary to ensure continuity.

Stakeholder Management:

• Collaborate with vendors to ensure expected performance levels.
• Ensure business analysts effectively address requirements from business partners/BPO networks.
• Oversee and control any implementation impacting your solution, managing dependencies with other solutions.

Documentation & Change Management:

• Ensure documentation is up-to-date.
• Manage the transition to Run phase.
• Work closely with various departments to design cross-application flows and ensure process maintenance and enhancement.

Leadership:

• Lead and manage team capacity and activities.
• Champion change management processes.
• Provide functional and SAP expertise guidance to the team.
• Support strategic decision-making and long-term solution planning.
• Conduct business relationship management to align priorities and ensure business value.
• Develop action plans for continuous improvement and address recurrent incidents.
• Foster skill development within the team.

Support:

• Support AMS teams for complex topics.
• Perform knowledge transfer to support teams, enhancing their autonomy.
• Provide solution guidance.

Required Skills and Experience:

Technical Skills:

• Must: Experienced in IT best practices.
• Plus: Proficiency in SAP FI CO, test campaign executions & automation tools, interface implementation, JIRA, and ServiceNow.

Soft Skills:

• Must: Excellent relationship-building skills, ability to work with multiple teams, fast learner, adaptability, critical thinking, strong analytical, synthesis, and communication skills, flexibility, and comfort with ambiguity.

Experience:

• Must: Minimum 5 years of experience in IT project management, including SAP FICO experience.
• Plus: Experience in an international, multicultural environment, within a large IT company, and in a team-oriented and collaborative setting.

Languages:

• Fluent in English.

Education:

• Master’s degree (or equivalent) in a related field.

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Provide Technical training and certification for junior technician.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.