1. 對數控磨床進行機器設定、調整和刀具佈置。
2. 閱讀並瞭解機械加工圖、幾何尺寸和公差要求。
3. 選擇正確的砂輪、轉速、進給量、夾具和夾緊方式。
4. 對砂輪進行偏移調整、修整和平衡。
5. 操作機器，依照品質/尺寸目標生產零件。
6. 使用千分尺、遊標卡尺、高度規、輪廓投影機、三坐標測量機（如需要）進行製程測量。
7. 確保零件品質符合圖面規格和客戶要求。
8. 保持機器區域周圍良好的5S管理。
9. 立即向上級報告任何異常情況、機器故障或品質偏差。
10. 始終遵守安全規則、個人防護裝備使用規定和公司標準作業規程。
11. 進行 ISO9001、ISO 14001 和 IATF16949 活動。
12. 管理層要求的其他任何事項。

福利待遇

• 增額和獎金
• 津貼（餐費、培訓費等）
• 醫療保險
• 小組診所
• 個人發展機會
• 帶薪培訓和發展/教育培訓計劃
• 公司年度晚宴暨幸運抽獎
• 節日紅包

In this role you will be part of a Field Service team providing a prompt and effective service to customers within the Water, Power, Petrochemical oil & gas and other associated Industries.  

In this role you will identify faults, repair, test and modify actuators in the field, carry out planned and preventative maintenance, mechanical and electrical installations of actuators and associated retrofit adaption of components, pedestals and drive shafts and completing accurate and technical site visit reports for each job.

This role would suit a determined problem-solver, who can think logically for troubleshooting issues and has the willingness to travel.

Role Description:

• Responsible for providing engineering design support and solutions for crane systems and industrial lifting equipment within the assigned region. Ensures that designs meet technical specifications, safety standards, customer requirements, and company guidelines. Supports continuous product improvement and localization efforts.

Key Tasks :

• Design & Development: Create and modify crane and lifting equipment designs using CAD software, 3D software and adhering to engineering standards including global and regional requirements.
• Technical Support: Provide engineering support to regional sales, service, and project teams, resolving technical challenges during planning, installation, fabrication and operation.
• Compliance & Standards: Ensure designs comply with industry standards, safety regulations, and company quality requirements and Konecranes standard practices.
• Collaboration: Work closely with global and regional engineering teams, manufacturing, project and suppliers to ensure design safety, manufacturability and cost-effective solutions.
• Documentation: Prepare calculations, technical drawings, specifications, and reports for designs, ensuring accurate documentation for internal and customer use.
• Continuous Improvement: Identify design improvements, product optimizations, and efficiency enhancements, contributing to innovation initiatives.
• Project Support: Assist in engineering feasibility studies, quotations, and project planning for regional projects.
• Awareness of ISO 14001 & 45001 standard

As a Graduate / Junior Engineer, you will support the engineering team by performing specific and limited portions of broader assignments under the guidance of experienced engineers. This role provides hands-on exposure across various engineering disciplines and an opportunity to develop strong technical and professional skills.

Key Responsibilities

• Perform specific and well‑defined tasks as part of larger engineering assignments under moderate supervision.
• Gather, analyze, and correlate basic engineering data using established procedures and tools.
• Execute routine or detailed engineering tasks, including calculations, modeling, and simple testing activities.
• Propose approaches for solving new or unfamiliar technical problems using sound engineering judgement.
• Identify inconsistencies or discrepancies in data, calculations, and outcomes and escalate as appropriate.
• Deliver work in accordance with agreed‑upon budget, scope, and schedule.
• Collaborate with cross‑disciplinary teams (civil, structural, mechanical, electrical, geotechnical) to support integrated design solutions.
• Assist in the preparation of design reports, engineering calculations, drawings, specifications, cost estimates, and project schedules.
• Stay informed on advancements in engineering technologies, tools, and industry best practices relevant to your discipline.
• Apply engineering software and digital tools to support design and analysis tasks.

Test Strategy & Development

• Develop cost-effective and high-efficiency test solutions for GaN and Silicon device families.
• Create, debug, and release test programs on discrete testers and mixed signal ATE platforms. Lead the transition of legacy platforms to new technology nodes.

Hardware Design & Requirements

• Lead the design reviews and acceptance of high-performance test interface hardware provided by external vendors.
• Design test hardware including load boards, probe heads, and sockets.
• Define test hardware requirements based on device specifications and characterization data

Execution & Sustaining

• Support New Product Introduction (NPI) through validation, release, and yield ramp activities.
• Provide sustaining support for production products and test platforms.
• Lead platform conversions and drive efficiency improvements across multiple ATE systems.

Technical Expertise

• Apply knowledge of wide bandgap semiconductors, power devices, and analog measurement techniques.
• Perform high-voltage and high-current testing safely and efficiently.
• Use lab tools such as oscilloscopes, DMMs, spectrum analyzers, and ATE debugging utilities.

Cross-functional Collaboration

• Partner with design, product, reliability, test, and operations teams to ensure smooth project execution.
• Organize technical data and present findings for engineering and management teams

You will play a crucial role in designing and analyzing structures for various building projects, ensuring safety, efficiency, and compliance with local regulations.

• Assist on structural design projects for a diverse range of buildings and structures
• Works on detailed or routine engineering assignments involving structural analysis and design.
• Collaborate with architects, contractors, and other engineering disciplines to resolve technical issues and ensure project success
• Stay up-to-date with the latest industry trends, technologies, and building codes
• Mentor and provide technical guidance to entry level engineers

We’re looking for a motivated and dynamic Service Operations Executive / Field Biologist to join our expanding team. The position supports the development and execution of initiatives that enhance service quality, operational efficiency, and people capability across branches. The role focuses on implementing service management processes, monitoring compliance, supporting training programs, and coordinating improvement projects in line with business and regulatory.

In this role you will be responsible for:

Service Process & Performance Support

• Assist in the implementation and monitoring of service management processes at branch level.
• Track operational KPIs, identify gaps, and escalate improvement opportunities.
• Provide administrative and analytical support for service capability initiatives.

Capability Building & Training

• Support the development, updating, and delivery of training materials related to service and operations.
• Coordinate training sessions, workshops, and coaching activities for Service Technicians and Supervisors.
• Collect feedback and monitor training effectiveness to ensure continuous improvement.

Audit & Compliance Monitoring

• Conduct branch visits to monitor service process adherence and regulatory compliance.
• Participate in route rides with Service Technicians and Supervisors to observe service delivery and client experience.
• Prepare audit observations and reports, highlighting areas for corrective actions.

Project & Initiative Support

• Assist in managing projects and programs assigned for service and operations capability development.
• Gather and analyze data, prepare reports, and support solution development for operational improvements.

Stakeholder Engagement

• Liaise with internal teams to ensure smooth execution of capability initiatives.
• Support communication and reporting requirements to management regarding progress, risks, and outcomes.

The ideal candidate will possess:

• Minimum Degree holder in any field.
• Entomology background will be an added advantage
• Computer skill is essential (Microsoft Word, Microsoft Excel, PowerPoint, and Video Editing).
• Possess good interpersonal, communication and writing skills especially in English.
• Mature, very proactive, result oriented, has good drive, can work under pressure.
• Can manage multiple tasks and deliver according to given deadlines.
• Required to travel to the branches throughout Malaysia.
• Must be mobile and have own transport.

Highly Desirable:

• Versatility to build rapport with people at all levels
• Multi-lingual in both verbal and written English and Bahasa Malaysia, able to converse in decent clear communication. Ability to converse in other local dialects will be an added advantage
• Commercially focused acumen

Renesas is seeking for a supplier quality engineer for its Outsourced assembly and test subcontractor management. The Subcontractor Quality Engineer is responsible for providing support of Supplier Quality Systems through identification and evaluation of key process metrics, verification of Renesas specific requirements, support of Quality and risk mitigation activities, continuous improvements, audits and implementation of best-known-practices. This role ensures that established manufacturing inspection, sampling and statistical process control procedures are followed and assure compliance to in-house and/or external specifications and standards, such as ISO9001, ISO14001, ISO/TS16949 wherever applicable.

Key Responsibilities:

Supplier Quality Management & Liaison

Act as the primary quality interface between suppliers and Renesas, ensuring alignment with quality requirements and expectations.

Quality Excursion Management & Corrective Actions

Lead the investigation of quality issues using structured problem-solving methodologies (e.g., 8D) and drive effective corrective and preventive actions to closure.

Supplier Audit, Certification & Change Control

Maintain and execute the supplier audit program and support supplier process/material change management and site certification activities.

New Supplier Assessment & Qualification

Provide quality leadership in the evaluation and qualification of new subcontractors supporting Automotive, High Reliability, Industrial, and Commercial markets.

Continuous Improvement Leadership

Analyze quality trends, manage improvement projects, and influence cross-functional teams to drive continuous improvement at subcontractor sites.

Training & Best Practice Deployment

Deliver supplier quality training and support the development and deployment of best-known practices across subcontracted manufacturing operations.

SQE (Supplier Quality Engineer) for Assembly sites (OSAT an IM sites)

Key Responsibilities

Supplier Quality Management & Liaison

Act as the primary quality interface between suppliers and Renesas, ensuring alignment with quality requirements and expectations.

Quality Excursion Management & Corrective Actions

Lead the investigation of quality issues using structured problem-solving methodologies (e.g., 8D), and drive effective corrective and preventive actions to closure.

Supplier Audit, Certification & Change Control

Maintain and execute the supplier audit program, and support supplier process/material change management and site certification activities.

New Supplier Assessment & Qualification

Provide quality leadership in the evaluation and qualification of new subcontractors supporting Automotive, High Reliability, Industrial, and Commercial markets.

Continuous Improvement Leadership

Analyze quality trends, manage improvement projects, and influence cross-functional teams to drive continuous improvement at subcontractor sites.

Training & Best Practice Deployment

Deliver supplier quality training and support the development and deployment of best-known practices across subcontracted manufacturing operations.

• Assist in the preparation, compilation, and submission of EPCC tender documents, including technical schedules, commercial inputs, and compliance checklists.
• Track tender timelines, submission deadlines, and evaluation milestones across active bids.
• Coordinate with internal teams (land, CRESS, finance, legal) to gather inputs required for tender submissions.
• Maintain an organised document repository for all active tenders, ensuring version control and audit trail.
• Support the development of no-policy special projects, coordinating feasibility inputs, authority submissions, and stakeholder correspondence.
• Track regulatory engagement and approval milestones for active special projects.
• Assist in preparing presentation materials and project briefs for senior leadership review.
• Coordinate with external consultants, authorities, and contractors on document requests and submission requirements.
• Attend and minute meetings with external parties, ensuring action items are tracked and followed up.
• Submit weekly progress updates to the Senior EPCC & Special Projects Manager on assigned projects.
• Maintain project status trackers and flag risks or delays proactively.

• 1–2 years in RE project development, engineering, or project management — internship or graduate experience considered.
• Bachelor's degree in Engineering, Energy, Business, or related field.
• Exposure to tender or proposal preparation is an advantage.
• Strong document management and organisational discipline.
• Proficient in Microsoft Office (Word, Excel, PowerPoint).
• Clear written communication, able to draft professional correspondence and meeting minutes.
• Detail-oriented with a checklist mindset.

Role Description:

• Responsible for planning, coordinating, and executing projects related to industrial equipment installations, focusing on overhead cranes and hoists. This role requires strong technical expertise, project management skills, and collaboration with customers, contractors, and internal teams to deliver projects safely, on time, within budget, and according to Konecranes’ quality standards.

Key Tasks :

• Plan, monitor, and manage crane and hoist installation, modernization, and service projects from initiation to completion.
• Prepare project schedules, resource plans, and budgets, ensuring adherence to contract terms.
• Coordinate with suppliers, contractors, and internal teams to secure timely delivery of materials and services.
• Provide technical support in crane and hoist installation, commissioning, and troubleshooting.
• Ensure compliance with engineering standards, safety regulations, and Konecranes quality requirements.
• Review technical drawings, specifications, and customer requirements to ensure feasibility and accuracy.
• Serve as the primary technical contact for customers during project execution.
• Conduct site visits, risk assessments, and progress meetings to maintain clear communication and trust with stakeholders.
• Attend to site meeting
• Provide professional guidance and technical recommendations to optimize customer lifting solutions.
• Ensure all projects are executed in strict compliance with local safety regulations, ISO standards, and Konecranes’ EHS policies.
• Promote a strong safety culture and monitor site safety performance.
• Identify opportunities to improve project delivery processes, reduce costs, and increase efficiency.
• Support the development of standardized procedures and best practices within the Project Engineering team
• Inform sales and business controller to trigger relevant billing according to contractual billing plan at predetermined stages throughout the project.
• Assist technical administration executive in gathering & reviewing relevant documents for submission to DOSH for design approval and load test.
• Perform any other related duties as assigned by Project Manager.
• Awareness of ISO 14001 & 45001 standard

Get to Know the Team

The Mobility team is an established team responsible for the Transport module in the Grab app. We improve the core transport booking experience. We are made up of experienced and diversified engineers. If you are looking for an opportunity to make it seamless and effortless for millions of users, then you should join our team!

We are working on high throughput, real-time distributed systems that use algorithms and machine learning techniques to solve hundreds of millions of requests per day. Our mission is to offer the best products and experiences to our passengers to increase adoption, engagement and conversion of our services.

We are a distributed team with members spread across Singapore, China, Vietnam and Malaysia at the moment. Our mode of communication is English, both in spoken and written form. Our team has direct end-user contact, and influence on the bottom line for Grab. You will report to our Software Engineering Manager, and you will based onsite in our KL office.

Get to Know the Role

We are looking for a Senior Site Reliability Engineer to provide better stability and operational excellence for Mobility team in Grab. We believe you have professional sysops/infrastructure knowledge and the ability to build comprehensive systems, but if you believe you have what it takes then we'd love to hear from you either way. This role is required because stability and operational excellence is critical to our services. In return, you will produce impacts to Grab's core systems.

The Critical Tasks You Will Perform

• Provide automated solutions for manual tasks and challenges we're facing.
• Manage cloud infrastructure using Infrastructure as Code solution.
• Get involved in deep diagnosis of incidents, and engage with multiple accomplished engineering teams on resolutions.
• Supporting different teams to make long-term infrastructure decisions, provide suggestions for infrastructure optimizations.
• Drive operational excellence practice and help improve reliability, stability and scalability challenges with engineering teams.
• Lead junior engineers to complete projects and help them grow.
• Mentor other engineers, define our technical culture, and help build a fast-growing team.

Preparation of designs and deliverables related to primary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of primary substation systems, including AIS/GIS configurations, transformer installations, circuit breaker selection, busbar arrangements, switchgear layouts, and disconnectors for voltages up to 800kV.
• Preparation of single-line diagrams (SLDs), general arrangement (GA) layouts, equipment sizing, and equipment layout plans for substations and transmission systems.
• Short-circuit force calculations, busbar sizing, fault current analysis, and equipment protection design, ensuring system stability and protection under fault conditions.
• Design of earthing systems, including grounding layouts, ground grid system design, and lightning protection systems for substations.
• Design and integration of HVDC and HVAC systems, including converter stations, ensuring compatibility with the overall substation design.
• Development of transformer layouts, including oil containment, busduct routing, and secondary system interfaces.
• Optimisation of substation layouts for new and upgraded substations, considering space constraints, equipment accessibility, and construction considerations.
• Review and development of control and protection systems for primary substations, ensuring coordination with secondary systems and compliance with grid operator requirements.
• Coordination with civil teams to design and integrate foundations, steel structures, and electrical cable routes, ensuring seamless integration with the primary systems.
• Development of equipment specification documents, bill of materials (BOM), and procurement support, ensuring the correct equipment is selected as per project requirements.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of primary systems.
• Detailed design and review of auxiliary systems, such as cooling systems, auxiliary power supplies, and battery systems for substations.
• Underground cable design, including cable sizing, cable routing, and integration into existing systems, particularly for HV cable systems.
• Coordination with external vendors and contractors to ensure the supply and installation of equipment in accordance with design specifications and project requirements.

Preparation of designs and deliverables related to primary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of primary substation systems, including AIS/GIS configurations, transformer installations, circuit breaker selection, busbar arrangements, switchgear layouts, and disconnectors for voltages up to 800kV.
• Preparation of single-line diagrams (SLDs), general arrangement (GA) layouts, equipment sizing, and equipment layout plans for substations and transmission systems.
• Short-circuit force calculations, busbar sizing, fault current analysis, and equipment protection design, ensuring system stability and protection under fault conditions.
• Design of earthing systems, including grounding layouts, ground grid system design, and lightning protection systems for substations.
• Design and integration of HVDC and HVAC systems, including converter stations, ensuring compatibility with the overall substation design.
• Development of transformer layouts, including oil containment, busduct routing, and secondary system interfaces.
• Optimisation of substation layouts for new and upgraded substations, considering space constraints, equipment accessibility, and construction considerations.
• Review and development of control and protection systems for primary substations, ensuring coordination with secondary systems and compliance with grid operator requirements.
• Coordination with civil teams to design and integrate foundations, steel structures, and electrical cable routes, ensuring seamless integration with the primary systems.
• Development of equipment specification documents, bill of materials (BOM), and procurement support, ensuring the correct equipment is selected as per project requirements.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of primary systems.
• Detailed design and review of auxiliary systems, such as cooling systems, auxiliary power supplies, and battery systems for substations.
• Underground cable design, including cable sizing, cable routing, and integration into existing systems, particularly for HV cable systems.
• Coordination with external vendors and contractors to ensure the supply and installation of equipment in accordance with design specifications and project requirements.

Preparation of designs and deliverables related to primary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of primary substation systems, including AIS/GIS configurations, transformer installations, circuit breaker selection, busbar arrangements, switchgear layouts, and disconnectors for voltages up to 800kV.
• Preparation of single-line diagrams (SLDs), general arrangement (GA) layouts, equipment sizing, and equipment layout plans for substations and transmission systems.
• Short-circuit force calculations, busbar sizing, fault current analysis, and equipment protection design, ensuring system stability and protection under fault conditions.
• Design of earthing systems, including grounding layouts, ground grid system design, and lightning protection systems for substations.
• Design and integration of HVDC and HVAC systems, including converter stations, ensuring compatibility with the overall substation design.
• Development of transformer layouts, including oil containment, busduct routing, and secondary system interfaces.
• Optimisation of substation layouts for new and upgraded substations, considering space constraints, equipment accessibility, and construction considerations.
• Review and development of control and protection systems for primary substations, ensuring coordination with secondary systems and compliance with grid operator requirements.
• Coordination with civil teams to design and integrate foundations, steel structures, and electrical cable routes, ensuring seamless integration with the primary systems.
• Development of equipment specification documents, bill of materials (BOM), and procurement support, ensuring the correct equipment is selected as per project requirements.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of primary systems.
• Detailed design and review of auxiliary systems, such as cooling systems, auxiliary power supplies, and battery systems for substations.
• Underground cable design, including cable sizing, cable routing, and integration into existing systems, particularly for HV cable systems.
• Coordination with external vendors and contractors to ensure the supply and installation of equipment in accordance with design specifications and project requirements.

This is an exciting opportunity for a motivated engineer to contribute to impactful Energy projects across global offices and continue developing their technical expertise in a supportive, high-performing team.

• Senior technical resource may serve as technical advisor for team
• Provides specialized technical input to studies and design for staff's specific area of expertise.
• Develops study and design procedures to facilitate high-quality cost-effective work by others.
• Participates in interdisciplinary review of project deliverables.
• Develop construction cost estimates and estimates of technical efforts for projects.
• Uses expertise in all steps of completing discipline component of PS&E package.
• Performs quality control review of design calculations or drawings.
• Prepares technical specification sections.
• Provides input to the development of engineering budget and schedule to meet requirements.

Preparation of designs and deliverables related to secondary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of protection and control systems, including relay settings, protection schemes, and interlock systems for substations.
• Preparation of single line diagrams (SLDs), protection logic diagrams, metering layouts, and cable termination diagrams.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of secondary systems.
• Relay coordination studies (overcurrent, earth fault, motor protection, distance protection), including relay setting calculations and fault analysis.
• Power system studies, such as load flow analysis, short circuit studies, transient stability analysis, motor starting studies, and arc flash studies.
• Development of control and relay panel layouts, including general arrangement (GA) drawings, functional block diagrams, and bill of materials (BOMs).
• Design of SCADA communication schemes and system integration for protection systems, ensuring seamless interface between control and field devices.
• Review and verification of design documentation to ensure compliance with industry standards (IEC, IEEE) and utility specifications.
• Support for commissioning and testing, including Factory Acceptance Testing (FAT) and site integration of secondary systems.
• Development of algorithms for enhanced system functionality, such as fault detection, relay coordination, and improving system stability.
• Interdisciplinary coordination, including collaboration with other engineering teams to integrate secondary systems with primary infrastructure.
• Preparation of external connection tables, cable schedules, and other design documentation as required by the project specifications.

Preparation of designs and deliverables related to secondary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of protection and control systems, including relay settings, protection schemes, and interlock systems for substations.
• Preparation of single line diagrams (SLDs), protection logic diagrams, metering layouts, and cable termination diagrams.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of secondary systems.
• Relay coordination studies (overcurrent, earth fault, motor protection, distance protection), including relay setting calculations and fault analysis.
• Power system studies, such as load flow analysis, short circuit studies, transient stability analysis, motor starting studies, and arc flash studies.
• Development of control and relay panel layouts, including general arrangement (GA) drawings, functional block diagrams, and bill of materials (BOMs).
• Design of SCADA communication schemes and system integration for protection systems, ensuring seamless interface between control and field devices.
• Review and verification of design documentation to ensure compliance with industry standards (IEC, IEEE) and utility specifications.
• Support for commissioning and testing, including Factory Acceptance Testing (FAT) and site integration of secondary systems.
• Development of algorithms for enhanced system functionality, such as fault detection, relay coordination, and improving system stability.
• Interdisciplinary coordination, including collaboration with other engineering teams to integrate secondary systems with primary infrastructure.
• Preparation of external connection tables, cable schedules, and other design documentation as required by the project specifications.

Preparation of designs and deliverables related to secondary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of protection and control systems, including relay settings, protection schemes, and interlock systems for substations.
• Preparation of single line diagrams (SLDs), protection logic diagrams, metering layouts, and cable termination diagrams.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of secondary systems.
• Relay coordination studies (overcurrent, earth fault, motor protection, distance protection), including relay setting calculations and fault analysis.
• Power system studies, such as load flow analysis, short circuit studies, transient stability analysis, motor starting studies, and arc flash studies.
• Development of control and relay panel layouts, including general arrangement (GA) drawings, functional block diagrams, and bill of materials (BOMs).
• Design of SCADA communication schemes and system integration for protection systems, ensuring seamless interface between control and field devices.
• Review and verification of design documentation to ensure compliance with industry standards (IEC, IEEE) and utility specifications.
• Support for commissioning and testing, including Factory Acceptance Testing (FAT) and site integration of secondary systems.
• Development of algorithms for enhanced system functionality, such as fault detection, relay coordination, and improving system stability.
• Interdisciplinary coordination, including collaboration with other engineering teams to integrate secondary systems with primary infrastructure.
• Preparation of external connection tables, cable schedules, and other design documentation as required by the project specifications.

As our End User Computing (EUC) Engineer you’ll be responsible for the ongoing management and operational support of our EUC environment. Here you’ll ensure users have the necessary hardware, software, and support required to perform their roles. You’ll also be involved in maintaining the computing environment, managing endpoint devices and security, administering virtual desktop infrastructure (VDI), while providing remote support as needed.

Within this position, your scope will cover:

• Managing and maintaining client computing environments, including physical hardware and virtual desktops to optimise performance and uptime
• Providing technical support to end users, troubleshooting hardware, software, and network-related issues via remote and in-person assistance
• Responsible for delivering endpoint management, ensuring devices are properly configured, secure, and compliant with our policies
• Administer virtual desktop infrastructure (VDI) solutions
• Collaborate with IT support teams to diagnose and resolve complex technical issues affecting end users
• Manage device imaging, software deployment, patching, and updates to maintain security and performance standards
• Ensure proper documentation of hardware inventories, configurations, and support tickets to track assets and service history\\

Operational Core Responsibilities

1. Oversee and ensure effective execution of rooftop solar maintenance activities (planned and unplanned) in line with contractual scope of work, service level agreements (SLA), and compliance to SOPs.

2. Coordinate annual and monthly maintenance planning, aligning manpower, site access, and third-party support schedules.

3. Provide on-site technical leadership in fault diagnosis and troubleshooting. Guide resolution based on root cause rather than symptoms.

4. Coordinate with Customer Service and internal teams to ensure accurate and timely communication of maintenance outcomes for effective client reporting and service continuity.

5. Review and verify site reports, inspection checklists, photos, and test records submitted by Technicians and Engineers. Ensure proper documentation for internal reference and client reporting.

6. Prepare high-level technical reports for various needs including client requests, compliance, analysis, claims, etc.

7. Oversee inventory planning and availability of spare parts, tools, and equipment required for ongoing operations; ensure stock readiness to minimize service disruptions and support operational continuity.

8. Ensure proper tracking, escalation, and closure of service tickets within defined SLA timelines, including continuous review of open items and coordination with relevant parties to resolve delays.

9. Plan, lead, and supervise execution of special technical projects (e.g., solar PV dismantling and reinstallation, equipment upgrades, relocations) in coordination with clients, contractors, and internal teams, ensuring scope clarity, schedule adherence, and risk control.

10. Ensure compliance with Quality, Safety, Health, and Environmental (QSHE) standards in accordance with ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and regulatory best practices.

Department Support Roles

1. Mentor and coach Engineer and Technician to improve technical competencies, task ownership, and work quality. Lead by example in field behaviour and problem-solving approach.

2. Assist in onboarding new field staff, delivering training on safety, standard tasks, and use of checklists or mobile apps. Support cross-division technical sharing if required.

3. Identify recurring issues or workflow inefficiencies. Recommend updates to checklists, SOPs, or job plans based on field feedback and lessons learned.

4. Provide technical input and documentation support for equipment failure investigations, including photo records, test results, and historical data.

5. Participate in high-priority maintenance or rectification works across other divisions/regions upon assignment by HOD.

6. Maintain professional relationships with clients, address operational concerns, and follow up on technical issues with support from the Customer Service and Commercial teams.

7. Act as the regional technical focal point for assigned accounts, building trust through consistent performance and communication.

8. Support technical risk reviews and provide site inputs during pre-project assessments or inter-departmental coordination meetings.

• Bachelor’s degree in Electrical Engineering or equivalent from a recognized institution.
• Possess 3 years of experience in project management, construction, or operations & maintenance of rooftop solar PV system.
• Possess valid CIDB Green Card and Working at Height certification.
• Advance understanding of rooftop solar PV systems, including design, components, troubleshooting, and compliance with performance and safety standards.
• Good understanding in Job Method Statement, HIRARC preparation for high risk working environment.
• Ability to prepare preventive and corrective maintenance schedules, oversee field service teams, and ensure timely, quality execution aligned with SLAs.
• Clear written and verbal communication skills to coordinate with internal stakeholders and document maintenance results through accurate technical reports.
• Strong interpersonal and communication skills for mentoring, client engagement, and inter-departmental collaboration.
• Proven capability to lead and guide technicians and assistant engineers in daily operations, training, and field discipline.
• Demonstrates high accountability, professionalism, and readiness to take initiative under limited supervision.
• Ability to evaluate issues on-site and make appropriate technical and operational decisions with sound judgment and proper escalation when required.
• Familiarity with ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and adherence to regulatory and internal safety standards.
• Commitment to following SOPs, maintenance operating standards (MOS), and company procedures consistently.

As an EUC Support Engineer at NEXTDC, you’ll provide L1/L2 technical support to our Technology team, resolving end-user IT issues. You will handle service tickets via phone, email, or in-person, escalate complex issues as needed, and assist with software installations, updates, and configurations. Here, you’ll also monitoring IT systems, identifying issues, maintaining documentation, and ensuring compliance with NEXTDC standards, with strong customer service and technical skills essential for minimising downtime

Within this position, your scope will cover:

• First-level technical support to users via phone, email, or in-person, including after-hours support as required
• Troubleshooting hardware and software issues on desktops, laptops, mobile devices, and other peripherals
• Onsite hands & feet support, where physically co-located to resolve technology hardware and software requests and issues, including for Teams meeting rooms and Audiovisual collaboration and presentation equipment
• Managing and resolving service requests and incidents within agreed service levels
• Documenting solutions and update knowledge base articles to assist with future troubleshooting
• Escalating complex issues to senior IT staff or external service providers as needed
• Setting up and configuring new hardware and software for users

Get to Know the Team

The DevTools Team builds and hosts internal platforms that help thousands of Grab engineers measure, monitor, and improve how they build software. Our flagship product, Engineering 360, is Grab's unified metrics platform — the single place where engineering leaders and individual engineers track productivity, code quality, system stability, and DORA signals across the company.

Get to Know the Role

We are seeking a Full Stack Developer Intern to work closely with our development team on building and maintaining Engineering 360 and related internal platforms. As part of this role, you will be exposed to both front-end and back-end development. Our tech stack includes React and JavaScript/TypeScript in Front-end, and Golang on the Backend. Apart from this, you will also be exposed to managing and building data streams and pipelines that power engineering metrics across Grab.

This is a fully onsite role, that will be based in our office at Petaling Jaya

The Critical Tasks You Will Perform

• You will work with the development team to build and maintain our internal engineering platforms.
• You will participate in the full software development lifecycle, from requirements gathering to deployment and maintenance. We follow an agile methodology with a 2-week Sprint.
• You will write clean, maintainable, and efficient code.
• You will troubleshoot and debug web applications and data pipelines.
• You will participate in code reviews and provide constructive feedback to other team members.

Get to Know the Team

You will be joining the Metadata & BI Platforms team within Grab's Data Engineering Platforms department. The team builds and maintains the systems that power Grab's data intelligence: Hubble (data discovery platform), Genchi (data observability platform), Superset and Power BI (business intelligence platforms), and the Data Agent (agentic analytics platform).

We work at the intersection of data engineering and AI, building systems that help thousands of internal users across Grab discover, understand, and act on data. The team is passionate about applying the latest AI advances to make data more accessible, intelligent, and useful at scale.

Get to Know the Role

As an AI Engineer Intern, you will contribute to building and improving AI-powered data platforms that make data discovery, observability, and analytics smarter and more intuitive at Grab. You will get hands-on experience building production-grade systems — from LLM integrations and agentic workflows to vector search pipelines — alongside engineers who ship AI features at scale.

This is a high-impact role where your contributions will be used by real internal users across the company. You will work in a fast-paced, collaborative environment with mentorship from experienced engineers, gaining exposure to the full AI product development lifecycle from design to deployment.

The Critical Tasks You Will Perform

• You will design and implement backend services and APIs that support AI-driven data platform features.
• You will integrate LLM APIs into platform workflows to enable intelligent automation and natural-language capabilities.
• You will contribute to building and orchestrating agentic systems (e.g., using LangGraph) for use cases such as data troubleshooting, SQL/code generation, and data Q&A.
• You will develop and optimize vector search and RAG pipelines to improve data retrieval and semantic understanding.
• You will debug and resolve performance or reliability issues in complex data systems, working toward production readiness.
• You will Collaborate with product managers, data engineers, and data analysts to deliver high-impact features.

Get to Know the Team

The ACE team is responsible for all of food, mart, dine out and reservation business. We use a microservice architecture in backend, and frontend tech stack use including (iOS, ADR, Flutter and Web). We often do platform abstraction to support our new our requirements to go online faster.

Get to Know the Role

This role is for supermarket product testing and is required because we are supporting our fast-growing business. You will report to the QA Engineering Manager II and be based at Petaling Jaya, Malaysia.

The Critical Tasks You Will Perform

• You will define test plans, test specifications, test suites, test cases and proposed tools for functional, security and performance testing
• You will understand the product/feature in-depth from the end-user point of view and the underlying implementation.
• You will work with the Product Manager, Frontend, and Backend developers to understand the feature and the implementation to build feature tests and impacted feature test cases.
• You will debug failed test cases by analyzing logs and API responses and report bugs with details. Follow-up on bugs to closure.
• You will maintain UI (Web, Mobile app) and API automation suites. Debug and correct script and data issues in automation suites.
• You will understand automation framework and add automation test cases for the new features and regression test cases