We are seeking fresh/experienced Test Maintenance Technician to support and sustain Final Test (FT) operations in a high-volume semiconductor manufacturing environment. This role focuses on maintaining stable test performance, supporting equipment and hardware, and ensuring consistent product quality and manufacturing efficiency.

Key Responsibilities

• Perform daily, monthly, 3/6 monthly preventative maintenance (PM) on ATE testers, handlers, and contactors.
• Clean and replace consumable parts like contactor pins, sockets, and indexers.
• Perform routine calibration of the test system's instruments (voltage sources, digital pins, parametric measurement units).
• Troubleshoot hardware issues related to the test cell, including mechanical, electrical, and thermal problems
• Support Test Engineers in correlating failures and gathering data for root cause analysis.
• Work closely with Engineers to implement process improvements and resolve yield issues
• Participate in failure analysis and root cause investigations
• Prepare and maintain test-related documentation and reports

Job Summary

Responsible for developing, executing, and optimizing test processes to verify product functionality and quality. Involves final test setup, data analysis, failure analysis, and documentation to support process improvement and production efficiency

Key Responsibilities

• Investigate yield, quality, issues and implement improvements.
• Develop, optimize, and control manufacturing processes.
• Support test process documentation and continuous improvement initiatives.
• Support production testing, analyze test data, identify failures, and implement corrective actions.
• Support testing-test and containments activities
• Execute, and improve test procedures and systems.
• Provide daily production test support to ensure stable operation

Job Summary

Responsible for developing, executing, and optimizing test processes to verify product functionality and quality. Involves final test setup, data analysis, failure analysis, and documentation to support process improvement and production efficiency

Key Responsibilities

• Investigate yield, quality, issues and implement improvements.
• Develop, optimize, and control manufacturing processes.
• Support test process documentation and continuous improvement initiatives.
• Support production testing, analyze test data, identify failures, and implement corrective actions.
• Support testing-test and containments activities
• Execute, and improve test procedures and systems.
• Provide daily production test support to ensure stable operation

Main responsible person for electrical installations including 33kV Switchgears, Transformers, Solar Power, MSB and DB.

Key Responsibilities

1. Lead a team of competent chargemen for maintenance of electrical installations including HV and LV switchgears, transformers, MSB and DB.
2. Ensure good performance of electrical installation by collecting and analyzing diagnostic data and take necessary action to prevent unplanned downtime.
3. Promote energy efficiency and conservation by:
   1. Monitor energy distribution
   2. Planning and implementing energy efficiency projects
4. Ensure good power distribution by:
   1. Collecting and analyzing load profile of all MSB to maintain even use of power
   2. Collaborate with equipment team for efficient capacity expansion planning and execution.
5. Registered with ST as competent 33kV chargeman for company.

Qualifications and Skills

• Minimum 33kV BO competent chargeman registered with Energy Commission (ST).
• Working experience > 10 years in related fields.

The Project LSS Quality Executive is responsible for supporting the implementation and maintenance of the Quality Management System (QMS) at project sites, particularly for Large Scale Solar (LSS) developments. The role ensures that all construction and installation activities comply with ISO 9001 standards, regulatory requirements, client specifications, and approved methodologies, while promoting a strong quality culture across project teams.

Key Responsibilities

Quality Management & Compliance

• Assist in implementing and maintaining the Quality Management System (QMS) in accordance with ISO 9001, project specifications, and regulatory requirements.
• Ensure all site activities comply with approved method statements, inspection and test plans (ITP), and quality procedures.
• Monitor and verify material approvals, workmanship standards, and installation quality at site.
• Liaise with internal teams, consultants, and clients on quality-related matters.

QA/QC Inspection & Monitoring

• Conduct daily site inspections and quality checks for civil, mechanical, and electrical works related to solar farm construction.
• Ensure proper documentation and records are maintained for all inspections, tests, and approvals.
• Raise and track Non-Conformance Reports (NCR), Site Observation Reports (SOR), and ensure timely closure.
• Witness testing and commissioning activities where required.

Audit & Documentation Control

• Support internal and external quality audits at project sites.
• Maintain proper control of quality documents including drawings, method statements, ITPs, and reports.
• Prepare and submit quality reports, inspection records, and audit findings in a timely manner.

Continuous Improvement

• Assist in identifying quality issues, root causes, and implementing corrective and preventive actions (CAPA).
• Promote continuous improvement initiatives to enhance project quality performance.
• Support lessons learned documentation and implementation across projects.

Training & Awareness

• Support the implementation of Quality-related training and On-the-Job Training (OJT) at site.
• Promote quality awareness among site personnel to ensure adherence to standards and best practices.

Coordination & Support

• Work closely with Project Engineers, Site Supervisors, and subcontractors to ensure quality compliance.
• Support the QSHE Manager and Project Manager in achieving project quality objectives.
• Ensure timely communication of quality issues and progress updates.

• Bachelor’s Degree in Engineering (Civil, Mechanical, Electrical, or related discipline) or equivalent.
• Minimum 2–5 years of experience in QA/QC or Quality Assurance, preferably in solar, renewable energy, or construction projects.
• Basic knowledge of ISO 9001 Quality Management System and QA/QC practices.
• Experience in site inspection, documentation, and quality control processes is preferred.

Key Competencies:

• Strong attention to detail and commitment to quality.
• Good analytical and problem-solving skills.
• Effective communication and coordination abilities.
• Ability to work independently and in a team environment.
• Proficiency in MS Office and documentation control.

Solarvest Energy is a leading renewable energy solutions provider committed to driving a cleaner and sustainable future. We design, build, and manage solar energy projects across Malaysia with a strong emphasis on safety, quality, and innovation.

Key Responsibilities:

• Implement and monitor the site’s Safety, Health and Environmental (SHE) policies in compliance with statutory requirements and company standards.
• Conduct daily site inspections and training to ensure safe work practices.
• Identify and mitigate potential hazards, unsafe conditions, and unsafe acts at the workplace.
• Liaise with the Safety Officer, Site Manager, and subcontractors on safety-related issues.
• Prepare and maintain safety documentation including reports, checklists, and records of incidents or near misses.
• Ensure workers and visitors comply with site safety rules and use proper PPE.
• Promote a strong safety culture and continuous improvement at the project site.

• Minimum 1 years of relevant experience in construction or renewable energy projects (solar project experience is an added advantage).
• Good knowledge of Malaysian safety regulations and standards.
• Strong communication, leadership, and observation skills.
• Able to work independently and proactively in a fast-paced project environment.

Role Overview

The Project Engineer drives the end-to-end delivery of solar PV projects — from confirmation through commissioning — ensuring they are executed safely, on time, within budget, and to the highest quality standards.

.

Key Responsibilities

• Project Management & Execution
• Lead the full project lifecycle from project award to handover, covering engineering, procurement, construction, and commissioning (EPCC).
• Prepare and manage project estimates, budgets, schedules, and execution plans; monitor progress against both financial and timeline targets.
• Coordinate with project supervisors, consultants, main contractors, subcontractors, and inter-departmental teams to ensure aligned delivery.
• Manage material procurement and subcontracting activities through the ERP system.

.

• Stakeholder & Authority Management
• Liaise with TNB HQ, local authorities, and consulting firms on grid interconnection, meter installation, licensing, and documentation.
• Coordinate with upper management on project status, key milestones, risks, and changes to approved scope.
• Establish and maintain working relationships with the O&M team to minimise operational disruption during project execution.

.

• Engineering & Design
• Conduct engineering site surveys for solar PV system installation.
• Review detailed design drawings and specifications; coordinate with designers on electrical, structural, and mechanical aspects of the solar PV system.
• Monitor engineering progress against approved budgets and forecasted schedules.

.

• Quality, Safety & Commissioning
• Ensure all parties adhere to established safety and QA/QC programmes throughout the project lifecycle.
• Establish QA/QC control and commissioning systems with complete documentation.
• Set up remote monitoring systems and conduct testing and commissioning of the solar PV system.

.

• Reporting & Continuous Improvement
• Prepare and submit accurate, timely progress and status reports throughout the project.
• Lead risk assessments and actively manage project and business risks.
• Organise post-mortem reviews to evaluate project outcomes, surface lessons learned, and recommend improvements for future projects.

• Bachelor degree in electrical engineering or equivalent (Preferably electrical engineering or working related to electrical)
• Working experience in construction field, TNB or Project management.
• Minimum of 2 years of experience in project engineering or a related field, with a focus on solar energy projects. However, we encourage fresh graduates to apply.
• Strong technical knowledge of solar PV systems and related engineering standards.
• Proficient in project management tools and software, such as MS Project and AutoCAD.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills, with the ability to work collaboratively in a team environment.
• Ability to manage multiple projects simultaneously and work under pressure to meet deadlines.
• Willingness to travel to project sites as needed.

This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).

Key Responsibilities

• Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle
• Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)
• Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups
• Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand
• Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development
• Implement best known practices and process within test manufacturing sites
• Drive Gross Margins (OEE, Yield, Retest) improvement initiatives

1. Responsible for assisting in all issues pertaining to electrical and mechanical maintenance at all times, act as a point of contact during after working hours as and when an emergency arises.
2. Responsible for the management of genset to be readily in place at the event of a TNB power supply interruption in order to ensure operations are not disrupted at the farm.
3. Perform preventive and predictive maintenance works as per schedule, using appropriate equipment.
4. Regularly monitor electrical and mechanical services and maintain all facilities, equipment and machines at the broiler farm.
5. Assist in updating relevant documents on the completed preventive maintenance in a timely and accurate manner.
6. Adopt a 5S compliance culture and as well as safety and health regulations as directed by the management.
7. To perform any other tasks and assignments as directed by the management from time to time.

We are seeking an experienced Test Application Engineer to support and sustain Final Test (FT) operations in a high-volume semiconductor manufacturing environment. This role focuses on maintaining stable test performance, resolving production test issues, supporting equipment and hardware, and ensuring consistent product quality and manufacturing efficiency.

Key Responsibilities

• Sustain and maintain FT ATE performance for mass production
• Provide daily production test support to ensure stable test operations
• Troubleshoot and resolve test-related issues including yield drops, tester alarms, and test escapes
• Perform test correlation, limit validation, and guard band verification
• Support test hardware maintenance (load boards, sockets, cables, probe interfaces)
• Coordinate with Process, QA, and Manufacturing teams to resolve tester and handler issues
• Support engineering change implementation (ECR / ECO) related to test
• Assist in NPI FT handover from development to mass production
• Support temperature testing, re-test, and containment activities
• Participate in failure analysis and root cause investigations
• Prepare and maintain test-related documentation and reports
• Prepare and maintain Equipment/Tester OEE.

We are seeking an experienced Test Application Engineer to support and sustain Final Test (FT) operations in a high-volume semiconductor manufacturing environment. This role focuses on maintaining stable test performance, resolving production test issues, supporting equipment and hardware, and ensuring consistent product quality and manufacturing efficiency.

Key Responsibilities

• Sustain and maintain FT ATE performance for mass production
• Provide daily production test support to ensure stable test operations
• Troubleshoot and resolve test-related issues including yield drops, tester alarms, and test escapes
• Perform test correlation, limit validation, and guard band verification
• Support test hardware maintenance (load boards, sockets, cables, probe interfaces)
• Coordinate with Process, QA, and Manufacturing teams to resolve tester and handler issues
• Support engineering change implementation (ECR / ECO) related to test
• Assist in NPI FT handover from development to mass production
• Support temperature testing, re-test, and containment activities
• Participate in failure analysis and root cause investigations
• Prepare and maintain test-related documentation and reports
• Prepare and maintain Equipment/Tester OEE.

1. To be responsible for planning and supervision of poultry caretakers in executing daily operations at the farm.

2. To comply with Egg handling SOP's from nest to hatchery inclusive of collection, separation, grading, fumigation, records, and documentation.

3. To ensure accurate feeding and feedback (observation, time frame, etc.) as well as feed inventory control and documentation.

4. To carry out daily monitoring, minor maintenance tasks and facility monitoring to ensure assets functionality are in good order at all times and follow up with the Maintenance Team in carry out timely and effective R&M works.

5. To ensure compliance in accuracy and timeliness of records and documentation updates and submissions as well as promptly highlighting non-conformance with appropriate corrective recommendations.

6. To supervise continuous housekeeping measures (including hygiene, rodent and pest control) for farm houses and all its equipment and machinery including feeding and drinking system.

7. To work closely with the Flock Health team and Supervisor (Production) and Farm Operation Executives on execution of flock heath program and bio-security monitoring, measures and programs as well as timely and accurate removal of none productive birds.

8. To work with Farm Operation Executive (Production) and Senior Supervisor (Maintenance) in planning of supplies to the group to ensure on time delivery, accuracy of distribution, recording of deliveries, correct usage and stock control.

9. To ensure best practices leading to maximize the flock health status by good veterinary observation, good husbandry observation, clinical analysis and bio-security

10. To perform any other task and assignments as directed by the Management from time to time.

ABOUT YOUR ROLE

The Workforce experience specialist is under the hub workforce experience, governance and project management sector. The role’s main responsibility is to support HR operation, the company HR digitalization roadmap and lead project-related efforts in Malaysia. The role shall also actively ensure the management of employee inquiries with a high degree of customer satisfaction, expertise and timeliness for Malaysia sites and support projects to expand our knowledge base and service portfolio.

YOUR RESPONSIBILITIES WILL INCLUDE

• Managing responses to questions on administrative HR procedures and practices via multiple channels (e.g., email, phone, chat, and case management system)

• Responsible for resolving Malaysia employee inquiries in a timely and quality manner

• Lead the preparation and creation of the necessary data & documentation for processing changes (personal data, job information, reporting line changes, compensation changes, etc) into the HR Master Data System in an accurate and timely manner (Oracle)

• Keep track and ensure the data quality of employee master data maintenance at all times  

• Coordinate Digital HR projects rollout in collaboration with different stakeholders and departments

• Coordinate process harmonization across multiple Business Units in the country. 

• Be an expert on Malaysia HR policy-related questions, provide guidance to both managers and employees, provide support on audit activities, and escalate as appropriate

• Educate employees and be an advocate of promoting services available to them and encourage self-service tools and other systems. Conduct online and offline training whenever necessary.

• Identify outdated knowledge articles and/or the need to create new knowledge articles

• Actively seek ways to expand the knowledge base through identifying process gaps and employee needs. Educate content owners proactively the correct way to manage articles in the knowledge base .

• Actively lead process standardization & service delivery projects through engagement with HR and line management.

• Act as an expert on the HR knowledge base and employee inquiries.

ABOUT YOUR ROLE

Join our growing manufacturing team in Kulim, Kedah, Malaysia! We're seeking a dedicated and knowledgeable Senior Executive, HR to ensure our operations meet stringent local and international standards for human resources.

The position function focuses on driving operational excellence in Learning & Development, Compensation & Benefits, foreign worker management, and shop floor hiring.

YOUR MAIN RESPONSIBILITIES WILL INCLUDE

• L&OD Management:

  • Execute site annual training roadmap based on organizational needs and competency gap analysis. 

  • Source, evaluate, and manage relationships with external training vendors, develop internal training capabilities for knowledge sharing. 

  • Track training effectiveness through feedback mechanisms. 

• C&B Management:

  • To analyze the compensation and benefits structure of the Company to ensure appropriate compensation across all departments and to participate in Employee Benefit Review exercise.

  • To review and manage salary structure, job analysis and evaluation, job grading, compensation and benefits surveys and compensation programs to align to Company’s reward and retention strategy.

  • To work closely with payroll providers to administer monthly salary administration and payroll processes accurately and timely.

• Foreign Worker Management:

  • Act as the primary point of contract for all matters related to expatriate and foreign national employees. 

  • Manage end-to-end work permit, visa, and residence permit applications and renewals in compliance with local immigration laws. 

  • Liaise with agencies and immigration offices to stay updated on policy changes affecting foreign employment. 

• Shop Floor Workers Hiring:

  • Partner with department heads to conduct workforce planning and create accurate job descriptions. 

  • Conduct interviews, coordinate assessment centers, and manage the offer negotiation and closing process. 

The Production Support Specialist is responsible for creating, managing, and optimizing production schedules and warehousing to ensure efficient use of resources while meeting customer demand, delivery timelines, and quality standards. This role coordinates closely with procurement, manufacturing, logistics, and sales to maintain smooth production flow and minimize downtime or shortages.

Key Responsibilities

• Develop and maintain daily, weekly, and monthly production schedules
• Analyse demand forecasts, sales orders, and inventory levels to plan production
• Coordinate with procurement to ensure raw materials and components are available
• Monitor production progress and adjust schedules as needed to address delays or changes
• Optimize capacity utilization, labor, and equipment efficiency
• Communicate production plans clearly to manufacturing and operations teams
• Track key performance indicators (KPIs) such as output, lead times, and inventory levels
• Identify and resolve production bottlenecks or inefficiencies
• Maintain accurate production records and reports in MRP systems
• Support continuous improvement initiatives and cost-reduction efforts