• Support departmental objectives and daily test operations
• Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
• Support continuous cost improvement initiatives related to test heads
• Support continuous quality improvement initiatives especially analysis on customer returns.
• Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
• Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs
• Improve product quality through early detection, prevention, and post‑test failure analysis
• Support continuous improvement of test quality triggering systems and media yield without impacting HDD performance
• Ensure all test process indicators, triggering limits, monitoring, and reaction plans are adequate and effective
• Verify, control, monitor, and propagate new processes and new equipment into PN Test
• Coordinate deployment and updates of test machine, robot, and tester software
• Assist engineers with daily operational support and special projects
• Ensure compliance with ISO standards, documentation, safety rules, and cleanroom protocols

The Junior Managers Program (JMP) is Bosch’s accelerated development program designed to prepare high‑potential engineers for future technical and leadership roles.

The Automation & Smart Manufacturing track focuses on developing future leaders in automation, robotics, digitalization, and Industry 4.0, through hands‑on projects, cross‑functional rotations, and strong mentorship.

What’s in store for you?

• Rotate across Technical Functions (TEF) and Manufacturing with a strong focus on:
  • Automation & Robotics Engineering
  • Manufacturing / Production Engineering (automation focus)
  • Industrial Engineering & Process Optimization
  • Digitalization, MES, and smart factory initiatives
• Lead and support automation projects from concept, feasibility, to implementation
• Contribute to productivity improvement, cost reduction, and safety through automation
• Support industrialization and ramp‑up of automated production lines
• Work closely with manufacturing, engineering, and global automation teams
• Build leadership, communication, and project management capabilities through real business ownership

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide postproduction and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

• Support departmental objectives and daily test operations
• Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
• Support continuous cost improvement initiatives related to test heads
• Support continuous quality improvement initiatives especially analysis on customer returns.
• Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
• Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs
• Improve product quality through early detection, prevention, and post‑test failure analysis
• Support continuous improvement of test quality triggering systems and media yield without impacting HDD performance
• Ensure all test process indicators, triggering limits, monitoring, and reaction plans are adequate and effective
• Verify, control, monitor, and propagate new processes and new equipment into PN Test
• Coordinate deployment and updates of test machine, robot, and tester software
• Assist engineers with daily operational support and special projects
• Ensure compliance with ISO standards, documentation, safety rules, and cleanroom protocols

ESSENTIAL DUTIES AND RESPONSIBILITIES:

The MRE Engineering Technician is responsible for executing DET Guzik and QMT testing activities, supporting production and engineering operations through accurate data collection, analysis, troubleshooting, and tester buyoff. This role ensures test quality, equipment readiness, and timely data reporting to support continuous manufacturing performance and quality improvement.

• Perform all types of DET Guzik and QMT testing, ensuring no delays and consistent, stable measurement results that meet Test Criteria
• Compile and upload test data to Online SPC timely to meet expected Test TAT, and continuously update all test requests and tracking documentation
• Conduct tester conversion buyoff, troubleshooting, and head changes as required
• Support data package compilation for NPI, SMO, Time Slice and other requests as assigned
• Manage reference and head issuance, inventory, screening activities, and reference generation
• Communicate test information clearly during shift handovers to ensure continuity of operations
• Maintain MRE lab 7S standards, comply with all safety and health regulations, and support engineering teams as directed
• Work in cleanroom environment with rotating 12-hour shift patterns and cross-plant support as required

• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:-
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure log, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.
• Assist Manufacturing in troubleshooting manufacturing related problems.
• Provide post-production support.

This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).

Key Responsibilities

• Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle
• Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)
• Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups
• Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand
• Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development
• Implement best known practices and process within test manufacturing sites
• Drive Gross Margins (OEE, Yield, Retest) improvement initiatives 

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

We are seeking a dynamic and results-driven Sales Manager to lead our sales and business development in Malaysia. The ideal candidate will be responsible for driving revenue growth, lead a sales team, building strategic customer relationships, and expanding the company´s market presence in the region.

Key Responsibilities

o  Performs Sales activities for new and renewal business for an assigned geographic area, set of accounts or product/service line to achieve or exceed assigned revenue objectives. Accountable for the sales accounts for the specified geography.

o  Establishes, develops and maintains business relationships with current and prospective customers to generate new business for the organization´s products and services

o  Creates and conducts sales presentations to match the company´s products/services with identified needs.

o  Provide accurate forecast for the new sales and renewal revenues to management.

o  Collaborate closely with principal Ansys to deliver double-digit growth in new business and acquire new logo´s minimum of 5 -7 per quarter.

o  Meet new business, renewal and services goals for the assigned territory / strategy account.

o  Develop, maintain, and implement account plans that contain strategies and action plans for maximizing account revenues

Education:

Bachelor´s or master´s degree in

engineering, Business, or a related field.

Experience:

o  Minimum 7 years of experience in

software sales to corporate, Enterprise, small and medium private companies, defense & Government.

o  Proven ability to drive revenue growth through industry association

partnership and C Level connect.

Technical & Business Skills:

o  Deep understanding of Ansys software, FEM, and CAE applications.

o  Knowledge of research funding mechanisms and grant opportunities.

o  Strong negotiation and contract management skills.

Other requirements:

o  Willingness to travel within Malaysia and

occasionally across Southeast Asia.

o  Fluency in English.

Features of the MT Program

• One year program
• Structured training curriculum includes but is not limited to specific business, management, operations and personal development areas
• Mentorship from senior
• Exposure to all aspects of the business
• Opportunity to join teams across various projects
• Career advancement and networking opportunities

How to Apply

Submit  your CV and 250–300-word long answers for each of the following six questions:

1. What motivates you to achieve success?
2. What is your most notable professional achievement?
3. Where do you see yourself in ten years?
4. What role does this job play in your career aspirations?
5. What characteristics define a successful leader?
6. What makes you a good fit for this organisation?

Job Description

This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).

Key Responsibilities

• Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle
• Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)
• Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups
• Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand
• Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development
• Implement best known practices and process within test manufacturing sites
• Drive Gross Margins (OEE, Yield, Retest) improvement initiatives 

• As a subject matter expert, you will consistently work to improve our suppliers' performance and the quality of our products.
• Supplier Auditing: Own the auditing process across all supplier management phases, including potential analysis, Cooperate Social Responsibility audits, initial sample process audits and comprehensive process audits.
• Supplier Development: Lead and support supplier quality and cost improvement activities. Conduct workshops, trainings, and regular follow-up visits to enhance supplier capabilities and performance in line with Bosch's requirements.
• Problem Solving: Intervene in critical supplier quality issues. You will take the lead onsite when our global plants require local support or when progress is stalled. Your role is to expertly coach the suppliers to master and apply structured problem-solving tools (e.g., 8D, 5-Why, Ishikawa) to ensure root causes are identified and holistically eliminated.
• Supplier Escalation Management: Manage supplier escalations that require higher management involvement, including the implementation and execution of dedicated quality measures, through to successful de-escalation.

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

Dalam peranan ini, anda akan bertanggungjawab untuk:

• Melakukan servis berkaitan dengan Hygiene seperti penukaran & sanitasi tong pelupusan tuala wanita di premis-premis pelanggan kami.
• Mencari peluang untuk menambah pendapatan sampingan dengan mempromosikan perkhidmatan Syarikat dengan sebaik mungkin di bawah bimbingan Penyelia.
• Memberi sokongan kepada Penyelia dan pasukan dalam pelaksanaan tugas.
• Membina dan mengekalkan hubungan yang baik dengan pelanggan-pelanggan.
• Memberi laporan yang betul dan tepat pada masanya apabila diarahkan oleh Penyelia.
• Menyerahkan wang kutipan servis (jika ada) dengan kadar yang segera atau dalam masa dua (2) hari.
• Hadir dan melibatkan diri di dalam perjumpaan/taklimat/mesyuarat mingguan/bulanan yang diadakan oleh pengurusan cawangan anda.
• Tugas-tugas lain yang berkaitan dengan pekerjaan yang mungkin diberikan kepada anda dari semasa ke semasa.

SEMUA JANTINA DARI PELBAGAI BANGSA ADALAH DIGALAKKAN UNTUK MEMOHON JAWATAN INI

Calon yang ideal memiliki:

• Kelayakan pelajaran minimum tahap SPM dan harus dikemukakan semasa menghadiri temuduga.
• Warganegara Malaysia, berumur antara 21 hingga 35 tahun (36 tahun & keatas akan dipertimbangkan jika mempunyai pengalaman kerja di industri Hygiene.
• Mempunyai lesen B2, D & GDL yang sah/ dalam proses mengambil lesen GDL.
• Minat melakukan kerja servis dan kerja luar (outdoor).
• Menetap di kawasan berdekatan.
• Pengambilan pekerja asing bergantung kepada kelulusan pihak berkuasa tempatan dan tertakluk pada permohonan visa mereka sendiri.

Sangat Diingini Jika Anda:

• Mempunyai sifat ingin belajar. Pengalaman tidak diperlukan kerana latihan insentif akan disediakan.
• Berdisiplin dan mampu mematuhi semua polisi dan dasar Syarikat.
• Berupaya untuk berbahasa Melayu dan juga memahami bahasa Inggeris mudah (penulisan dan percakapan).
• Boleh menggunakan telefon pintar dan celik IT/teknologi.

The CRM Intern will support customer master data governance and related operational activities in Oracle Cloud. The role primarily focuses on customer master data creation and updates, ensuring a high level of accuracy, completeness, and compliance with internal control requirements.

In addition to operational responsibilities, the intern will assist in identifying process gaps and improvement opportunities to enhance efficiency, standardization, and overall data quality.

The role is based within the Global Accounting Operations (GAO) in Bayan Lepas, Penang

The Purchasing Specialist supports the Advanced Packaging line by ensuring timely and cost‑effective sourcing of MRO, indirect materials, and capital equipment. The role manages suppliers, supports NPI requirements, and partners with Engineering Team to develop the critical spare parts strategy. Responsibilities include driving cost savings, mitigating supply risks, and managing PR/PO and contract processes efficiently.

Renesas Electronics, a leading global semiconductor company, is rapidly scaling its AI-focused power delivery business. Products include high-performance digital power VRMs, multiphase controllers, Smart Power Stages (SPS), Vertical Power Stages (SPS with integrated capacitors and multiple silicon die), Power Towers (power modules integrating multiple SPS-equivalents with capacitors and inductors), and power MOSFETs. 

Key Responsibilities 

1. Sourcing Management

• Develop sourcing strategies for MRO, Indirects, and CapEx.
• Build multi‑sourcing strategies for critical equipment and spare parts.
• Support NPI builds, trials, and new product introduction requirements.

1. Supplier Management

• Negotiate pricing, contracts, terms, warranties, and Service Level Agreement.
• Conduct supplier performance reviews (On time delivery, quality, service response).

1. MRO / Spare Parts Management

• Coordinate with Engineering Team on preventive maintenance spares and urgent breakdown parts and develop critical spare strategy.

1. Cost, Risk & Compliance

• Drive annual cost savings and cost up avoidance programs.
• Identify and mitigate supply risks (single source, long lead items).

1. Procurement Operations

• Manage PR/PO cycle, contract management, support urgent breakdown procurement and expedite where necessary.

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

Role Description:

• Responsible for providing professional maintenance, inspection, troubleshooting, and repair services for industrial cranes and hoists. This role plays a critical part in ensuring customer equipment operates safely, reliably, and efficiently, while representing the Konecranes brand with strong technical expertise and customer service. Perform preventive maintenance not requiring compliance inspections, corrective maintenance, retrofits, crane installation or commissioning. Technicians can be further classified into "Maintenance Technician" or "Inspector" (i.e. those predominantly performing preventive maintenance) and "Service Technicians" (i.e. those predominantly performing maintenance and retrofits).

Key Tasks :

• Perform preventive maintenance, inspections, troubleshooting, and repairs on overhead cranes, hoists, and related lifting equipment at customer sites.
• Diagnose mechanical, electrical, and control system faults and implement corrective actions.
• Carry out load testing, adjustments, calibrations, and commissioning of crane systems as per company standards and safety requirements.
• Complete service reports, job documentation, and recommendations for customers accurately and on time.
• Provide technical support and professional advice to customers regarding equipment condition, safety risks, and service solutions.
• Ensure all work complies with Konecranes safety policies, ISO standards, and statutory regulations.
• Support emergency call-outs and breakdown service as required.
• Collaborate with the Service team to improve service delivery, technical skills, and customer satisfaction.
• Maintain company tools, service vehicle, and equipment in safe and proper working order.
• Awareness of ISO 14001 & 45001 Standards

Job Summary

• Providing administrative support in HRL.

Job Scope

• Provide administrative assistance within the department.
• Prepare reports and documents for weekly and monthly.
• Assist in handling disciplinary related issues.
• Administer HRL stationery request and maintain proper records.
• Assist in organizing company-wide activities.
• Any ad-hoc duties as per assigned from time to time.

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

We are looking for a Procurement Specialist to support new product introduction (NPI) programs for advanced semiconductor solutions. Working closely with Engineering, Manufacturing, and Quality teams, this role will drive sourcing and supplier management for direct, secondary, and packing materials. The position plays a key role in ensuring cost-effective, reliable supply to support next-generation AI-powered products.

Key Responsibilities

• Source materials to support semiconductor development and production needs
• Manage RFQ/RFP processes and evaluate supplier quotations
• Negotiate pricing, commercial terms, and supplier agreements
• Engage suppliers early to support new product builds (NPI)
• Issue purchase orders and ensure on-time delivery, resolving supply issues as needed
• Support supplier audits and performance evaluation 

AGEO (ALA Engineering) is a leading innovator in automation technology, specializing in solutions for heavy-duty operations. We develop cutting-edge embedded systems to support industrial vehicles in the most demanding real-world environments.

We are looking for Senior Embedded Software Engineer to take technical ownership of custom embedded products that power autonomous and connected vehicle platforms. In this role, you will work across the full lifecycle, from early hardware bring-up and firmware architecture through field deployment and fleet management, playing a key role in shaping the future of AGEO's autonomous systems.

Exact role will be determined based on experience.

What you'll do:

• Design, develop, and maintain production-grade embedded firmware for safety-critical ECUs
• Architect and implement real-time systems using RTOS
• Enforce deterministic execution, interrupt handling discipline, and timing guarantees
• Take ownership of embedded products - stabilizing existing codebases, driving new feature development, and maintaining long-term reliability across deployed fleets
• Lead board bring-up activities, including hardware validation, driver development, and system initialization
• Collaborate closely with hardware engineers on schematic reviews, PCB bring-up, and co-debugging
• Establish best practices for code quality, testing, and maintainability

What we're looking for (Requirements):

• Strong expertise in C/C++ for embedded systems
• Experience in RTOS-based development (FreeRTOS, Zephy, or equivalent)
• Solid understanding of
• Interrupts, DMA, timers, and low-level drivers
• Deterministic real-time behavior
• Memory management in constrained embedded systems
• Experience with I2C, SPI, UART, CAN/CAN-FD
• Experience with Ethernet-based communication (TCP/IP, UDP, MQTT)
• Experience working with cellular communication modules and modem integration (AT command interfaces, network bring-up, connection management)
• Proficiency using hardware debug and validation tools - logic analyzers, oscilloscopes, multimeter
• Ability to read schematics, interpret IC datasheets, and work effectively at the hardware-software boundary
• Solid Git workflow for collaborative development practices
• Minimum 4+ years of embedded software development experience

Nice to Have (Bonus):

• Experience with embedded Linux systems such as Buildroot, Yocto
• Exposure to ROS2
• GNSS (RTCM, PPP, RTK) application knowledge
• LoRa/LoRaWAN or similar wireless radio communication experience
• System modeling (UML/SysML) experience

Education and Experience:

• B.S. degree or higher in Computer Engineering, Electrical Engineering, or equivalent

Job Summary

The duties of HR Expert – Industrial Relations relate to the human resource and operations functions pertaining to all associates.

Job Scope

• Conduct counselling and coaching for staff pertaining to performance and disciplinary issues.
• Take necessary disciplinary actions including conducting investigation, drafting warning letter  conducting domestic inquiry pertaining to employees disciplinary.
• Perform analysis / prepare related reports on employee and industrial relations and any other areas within the scope.
• Monitor employee issues by analyzing types of misconducts of respective department.
• Monitor behavior and take action to adequately address such concerns or issues to avoid or to successfully defend against litigation.
• Any other duties as assigned from time to time.

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc